21 сағат бұрын
14 күн бұрын
21 күн бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
4 ай бұрын
Пікірлер
@DesertTactical 2 күн бұрын
It looks cool. Thats about it. I picked one up to complete my new build. Its not convincing and doesnt feel right. The palm swell is thinner than the front (finger) part of the grip. Very unnatural and uncomfortable grip. Oddly enough, the grip feels better when I hold it backwards! Perhaps its meant for bench rested shots. For drills and training that require moving, reloads and one hand manipulation its horrible. Ive had it installed for just a few days and already ordered a BCM Mod3 grip for a couple bucks less... go figure. The only good I can find in this grip is aesthetics and the 12° angle... This grip is going in the spare parts bin only to be forgotten of...
@itsmillartime6916 2 күн бұрын
Curious what length your running it on. Definitely have heard it’s hit or miss some folks love it others not so much. The more I’ve held mine I like it. Actually looking at possibly snagging another for an upcoming build.
@DesertTactical 2 күн бұрын
@@itsmillartime6916 I have one I can rehome. Haha
@itsmillartime6916 Күн бұрын
I’ll let you know. Wasn’t planning on doing any builds this year next thing you know looks like I’m building two more 🤣🤣🤣
@DesertTactical Күн бұрын
@@itsmillartime6916 happens! Lol
@Typicalpnwguy 5 күн бұрын
So hawt
@tf2529 5 күн бұрын
Is this the carbine or extended carbine? Good video, thank you
@itsmillartime6916 5 күн бұрын
Thank you 🙏🏻 this is the carbine length. The extended version goes beyond the FSB allowing mounting further forward on longer barrels like a 14.5 or 16”. Extended would too long definitely too long with 11.5” barrel. Length of extended is 12.625” so more suitable 13.5” and up I’d say.
@shootintheshtpodcast 8 күн бұрын
Boooo, I wanted to see it mounted.
@GldenRetriever 9 күн бұрын
Those turbos are hard to beat. I prefer my modlite PL350-OKWs (gen 1) for the switches, but I hear the philster arc switches for the X300s are pretty good as-well. You were smart to get the B series as it's a better design for most use cases. I like the A for mounting to stuff like the AOM. Best to stock up on the surefire rechargeable batteries as they will pay for themselves if you ever use the light for training or it gets bumped on without you knowing. (That was one of the big reasons I love my 18350 in the modlite). Hard to beat the safariland 6xxx ALS and SLS series as-well if you don't want to run a blackhawk T series. Don't bother with the 7TS line, unless you don't mind it being more fragile. The 6365 is my personal favorite from them, but I haven't gotten one since I started running optic cut guns. Haven't messed with or heard anything about the safariland vault line, but those could be worth looking at. If you look around and want a quality holster for really cheap, I can't recommend the blackhawk t series enough. The first two I got was from ebay for 30 and 35 bucks for the TLR-1HL and then cut it to run an optics mount and to run my PL-350. I now currently run their staccato X300 RDS holster for my CZ75 phantom with no complaints, besides you need an adapter to run safariland mounts.
@itsmillartime6916 8 күн бұрын
I think next I may snag up a TLR-VIR II to play around with next. Like the idea of nightvision capability too but haven’t heard a ton on the that light.
@gritrgear 14 күн бұрын
🔥🔥🔥Please let us know what's the best way to contact you regarding potential collaboration
@GHicks-lu5tu 18 күн бұрын
Just ordered mine on sale for $57… HOT TWO!!!
@itsmillartime6916 18 күн бұрын
The prices at the blem sale are wild. I was tempted by a few 😂
@jbcustom3745 15 күн бұрын
me too got 3 of em, HRT cloners rejoice! Also got the black federal rail for $150
@itsmillartime6916 15 күн бұрын
I keep waffling on a HRT handguard built upper. Already have a few 11.5 setups. Leaning toward complete URGI at moment.
@iicashiiv790 18 күн бұрын
I bought an aero upper and it has no forge mark on it why is that?
@itsmillartime6916 18 күн бұрын
I’ve heard a couple different things on uppers with no forge marks. One being forger just doesn’t mark some. Which makes sense to me.
@LDR1100RS 21 күн бұрын
That's a very nice looking AR. Congratulations!
@itsmillartime6916 21 күн бұрын
Thank you 🙌
@GotGammage 21 күн бұрын
This was awesome and I'm glad I found your video. This made my purchase easier!! Thank You, Millar!!
@itsmillartime6916 21 күн бұрын
Always glad to help out 🙌 just got in a few new tools I’ll have videos coming soon for 🤓
@popinmo 22 күн бұрын
i wanna diy it
@itsmillartime6916 22 күн бұрын
DIY the bcg?
@popinmo 17 күн бұрын
@@itsmillartime6916 yes
@michaelweber9290 23 күн бұрын
Thanks
@thomasrouh2258 24 күн бұрын
They work......Tubbs or Wilson Combat flat wire are without a doubt the longest lasting design.....ISMI makes the very best flat wires and they are quiet.....
@alexh5561 26 күн бұрын
You mention vents on the BCM but I don’t see any at all
@itsmillartime6916 26 күн бұрын
Gas venting is normally done via the back levers from angle of area they connect or some redirect gas from the bottom of the levers. This is direct from BCM site: “The U.S. patents pending BCM Mod 3 Charging Handle now features upper and lower and side exhaust channels to vent gas from the chamber away from the shooter during operation of the weapon. While these channels are optimized for the BCM MK2 Upper receiver, they still provide improved gas diversion on all Mil-Spec upper receivers.”
@alexh5561 25 күн бұрын
@@itsmillartime6916 got it, thank you! I was looking for more obvious cuts along the charging handle or something along those lines. How did you end up liking the FCD ACF btw?
@itsmillartime6916 24 күн бұрын
@@alexh5561 I unfortunately haven’t run the FCD yet. Was planning to build an upper out to run it and the FCD handguard I have but haven’t figured out fully what barrel.
@Jones-xx2gc 27 күн бұрын
Glad I saw this video. Have a 6p and G2X. Was considering boring out the 6P to take an 18650 but as Iv'e had it for 20 years plus I was reluctant to do the mod.
@itsmillartime6916 27 күн бұрын
16650 setup is still going strong. Bought batteries for all of G2Xs.
@derf2170 Ай бұрын
Kinda pointless watching gun videos on KZfaq now
@itsmillartime6916 Ай бұрын
Yeah it’s hard to tell what can and can’t show. Which sucks because I always want to be able to show how to set something up but can’t
@derf2170 Ай бұрын
@@itsmillartime6916 you on rumble?
@itsmillartime6916 Ай бұрын
@@derf2170I have a buddy that tried to shift onto there awhile back and found exposure was very minimal on there. Harder to grow. KZfaq kinda has market cornered for videos. Did just join a new social media platform still in Beta.
@parabellumresearchlab Ай бұрын
👏🔥
@itsmillartime6916 Ай бұрын
This bag is pretty sweet! Glad I snagged one.
@takenusername Ай бұрын
I would have liked it if you turned it so I could see the knurling on the front of those charging wings.
@itsmillartime6916 Ай бұрын
I can try to send you pictures if you’d like. I’m up to three of these charging handles and love them
@LucXation Ай бұрын
Can I place this cover on the maritime ?
@itsmillartime6916 Ай бұрын
It’s appears Agilite offers a Gen4 Maritime/Fast SF high cut cover that should fit a Maritime. Believe this is a different then I’m a utilizing.
@ZXRVideos Ай бұрын
Video reminds me of a famous Michael Douglas quote out of the movie Basic Instinct, when Sharon Stone shows him her tits, he looks at one and say, "I've seen it before". .
@shootintheshtpodcast Ай бұрын
Sweet
@itsmillartime6916 Ай бұрын
🙌
@jmc112485 Ай бұрын
Who’s paying for this video?
Ай бұрын
🇺🇸
@itsmillartime6916 Ай бұрын
🇺🇸
@davidkay7389 Ай бұрын
Just got mine and this was the only video I viewed to get an idea of operation and setup. Thx
@itsmillartime6916 Ай бұрын
Glad to help out. Hope yours doesn’t have any issues. I found temp and humidity on mine was vary sporadic so ended up returning it. Read a bunch of reviews and some worked find others had issues I was seeing.
@itsmillartime6916 Ай бұрын
Reddit community here: www.reddit.com/r/Shootin_The_Shit/s/VYjPyX4N2i Podcast Apple: podcasts.apple.com/us/podcast/shootin-the-sh-t/id1591032376 Spotify: open.spotify.com/show/62qppP9GXacQWSOKt0ge8d?si=Dd1frgJeRme2ABm5gHNO7g
@parabellumresearchlab Ай бұрын
👌 🔥 nice! U just need one now done up by us 😉 lol
@itsmillartime6916 Ай бұрын
The stars shall align and we will make something happen.
@dw7094 Ай бұрын
Aren't we all surprised with what was in the box?
@1youngxn_5 Ай бұрын
I fw that view🔥🔥 and the pistol
@itsmillartime6916 Ай бұрын
Thank you 🙌🙏🏻
@TheAimTato1911 Ай бұрын
Love the look of your build
@itsmillartime6916 Ай бұрын
Thank you 🙏🏻
@user-op7vk5dt7g Ай бұрын
Why would you want a gun to look like a toy?
@itsmillartime6916 Ай бұрын
Not sure why you think it looks like a toy… Why would you want a toy to look like a gun?
@thomasrouh2258 Ай бұрын
That thing is "short stroking" Get rid of the blue spring.....Make sure the bolt locks back with all your mags......That's what you're describing.....
@thomasrouh2258 Ай бұрын
What length gas system and barrel on the suppressed AR you had feeding issues with?......
@itsmillartime6916 Ай бұрын
11.5” carbine gas, blue springco H2 buffer.
@thomasrouh2258 Ай бұрын
@@itsmillartime6916 Have you tried a Tubbs flat wire standard with H2 or Sprinco red/white with H2? Have you tried that mag giving you problems in another service rifle? Just curious.....USGI mag springs are usually good for 20,000 rounds......And do you have adjustable gas block.....You may have it under gassed.....What's your ejection pattern look like when the firearm is cycling properly with no failures.....? With those Sprinco springs and for all buffer springs a light coat of EWG grease on the spring helps......I found unless running adjustable gas block you will have a more reliable firearm with a standard buffer spring.....just tune it with the buffer weight.....H2 and standard flat wire or CS.....I've changed out all types of AR mag springs with those Sprincos and never ran into that problem.....Just trying to help with tuning.....Hope you don't mind......
@user-ln3xg1lo5j Ай бұрын
Can I buy it? Can you send it to Thailand?🙏🏽
@itsmillartime6916 Ай бұрын
Not for sale. Thanks though.
@itsmillartime6916 Ай бұрын
Reddit community here: www.reddit.com/r/Shootin_The_Shit/s/VYjPyX4N2i Podcast Apple: podcasts.apple.com/us/podcast/shootin-the-sh-t/id1591032376 Spotify: open.spotify.com/show/62qppP9GXacQWSOKt0ge8d?si=Dd1frgJeRme2ABm5gHNO7g
@richardkrueger5909 Ай бұрын
A show and tell of mounting?
@itsmillartime6916 Ай бұрын
KZfaq is unfortunately not a fan of any assembly. By that I mean they will unfortunately delete me for showing that. Prior to policy changes there were individuals showing how. I believe their videos may possibly still be up as well.
@triggereddad Ай бұрын
🔥🔥🔥🔥🔥🔥
@itsmillartime6916 Ай бұрын
🙌
@S.P.B.222 Ай бұрын
Damn, love it! 💪😁👍
@itsmillartime6916 Ай бұрын
Thank you 🙏🏻🙌
@VVSLEVAGO Ай бұрын
What stock is that and can you run it on a regular ar lower
@itsmillartime6916 Ай бұрын
Jmac Custom Skeleton stock. 9” version. KNS makes adapter to run on standard MilSpec lowers. I’m running the adapter as well.
@VVSLEVAGO Ай бұрын
@@itsmillartime6916 🔌💯🔥
@VVSLEVAGO Ай бұрын
Turns out you need an upper that doesn’t require receiver extension haha
@itsmillartime6916 Ай бұрын
yup 😂 BRN180, 22LR setup with CMMG bcg, I believe Foxtrot Mike but think need their buffer tube plug. Possibly the new Palmetto Jakyl too.
@EFTScum Ай бұрын
That mf is disgusting
@beachdrugpanda Ай бұрын
Did you t2 come with screws or will come with my unity mount
@itsmillartime6916 Ай бұрын
Been awhile but pretty sure screws came with the mount.
@beachdrugpanda Ай бұрын
@@itsmillartime6916 i appreciate it man. Was worried I was gonna have to MacGyver it up with zip ties and bazooka bubble gum
@beachdrugpanda Ай бұрын
@@itsmillartime6916 awesome I appreciate was worried I'd have to MacGyver it with zip ties and bazooka bubble gum
@nickb888 Ай бұрын
It comes with one. If you buy secondhand and it doesn’t have the screws Unity will send you spares for free.
@itsmillartime6916 Ай бұрын
That’s great! Thanks for sharing. Speaks to Unity’s customer service 🙌
@huesitosdown Ай бұрын
does this fit a 7.62x39 barrel
@itsmillartime6916 Ай бұрын
I haven’t dabbled in the 7.62x39 world but if the lugs are different on the bolt it will not fit. Have me curious since I haven’t tried 7.62 if it is different.
@huesitosdown Ай бұрын
@@itsmillartime6916 i been looking out to see wich one i need but have not found no info
@albertptran Ай бұрын
These FCD’s are so pricey. Got 5 charging handles from Aero, BCM, Radian, Creative Arms for $50-60
@itsmillartime6916 Ай бұрын
They are pretty chunky too.
@silasvongsamath6500 6 күн бұрын
It’s worth it, I have 2 FCD, one on MCX Spear LT 11.5 with RC3 and Rattler LT with 300SPS. Helps much with gas.
@YMSA2011 2 ай бұрын
Is it bolt release AND hold open or just release?
@itsmillartime6916 2 ай бұрын
Just release.
@jacob9436 2 ай бұрын
What are the names of the ptt and the cord that plugs into the ptt from the headset please im so lost.
@itsmillartime6916 2 ай бұрын
Not sure I’m fully understanding question. The push to talk is the Disco32 Nexus. The cable that goes into the push to talk comes with the Otto Noizebarrier Tacs.
@jacob9436 2 ай бұрын
@@itsmillartime6916 oh okay i bought the range sa thats why i was looking for that other cord that comes with your headset. Thanks though for the info
@itsmillartime6916 2 ай бұрын
@@jacob9436 ah this makes more sense. The Range set is not equipped with the internals to support coms.
@MXKID34 2 ай бұрын
Buy a Daniel Defense BCG, enough said
@itsmillartime6916 2 ай бұрын
I may snag one of theirs at some point to check out. Pretty sure Daniel Defense utilizes the same Microbest BCGs SOLGW does.
@joshtalbot1086 2 ай бұрын
You can get the same thing from botach for 50 bucks
@mick5740 2 ай бұрын
Does this Sprinco really make a difference? In heard this from a buddy and maybe I heard solgw use these ? Also he told me try s h or h2 buffer. Iv got a midlength standard rifle going. But it seems to always had a problem extracting but not ejecting ! It holds the spent shell sometimes Rarely but that’s when it causes a malfunction. Never had this before so I’m thinking it’s a problem with the bolt or gas system maybe. I had out a BCM upgraded extractor kit in it and that fixed some other stuff extractor problem it was having with steel case
@itsmillartime6916 2 ай бұрын
Springco spring was huge difference when comes to mitigating recoil. Really tamed my setup. From your description my mind jumps to looking at gas system to assure no leaks. Have you tried different mags? And are you running suppressed?
@LeeMurr713 2 ай бұрын
I’m trying to score a pair of the OG fat straps in Ranger Green but have had no luck so far.
@itsmillartime6916 2 ай бұрын
Just took quick browse for you. Noticed Spiritus doesn’t list them on their site anymore. Didn’t realize they were discontinuing them. Is there reason you don’t want the Molle the mk4 offers? I haven’t run my mk4 yet but the extra ability hang things off or side chem lights in is appealing.
@LeeMurr713 2 ай бұрын
@@itsmillartime6916 yeah they’ve been discontinued for a little while now. Purely aesthetic to be honest. I just really like the older ones. I have a few setups in different colors just didn’t get the chance to snag the old gen straps for my ranger green before they did away with them. Nice setups btw!
@LeeMurr713 2 ай бұрын
I’ve been scouring the used market daily for months haha
@itsmillartime6916 2 ай бұрын
@@LeeMurr713 I was pretty sure Brownells had them recently but doesn’t currently. Have you worked down list of dealers from the Spiritus page? That’s where Spiritus directed me. Im in same boat waiting on few RG Spiritus items to return to stock. Last year I saw a prediction of RG shortage due to IDF uses RG. I’d say that prediction was pretty accurate from availability on certain RG items.
@itsmillartime6916 2 ай бұрын
@@LeeMurr713 Thank you for compliment on my setup. I’ve really been enjoying it. Definitely understand the aesthetic. I definitely do the same. Do enjoy the slicker style of OG fat strap without all the molle. Takes a bit for me to warm up to new designs lol
@mdixon26288 2 ай бұрын
Bro replace the rings and see what happens.
@itsmillartime6916 2 ай бұрын
Replaced them awhile back been good since.
@furysactorslounge3956 2 ай бұрын
Just got mine in. I had to loosen the Allen screws or it won’t fit into the channel. Is this normal?Will leaving the Allen’s a little loose be a problem?
@itsmillartime6916 2 ай бұрын
I haven’t loosened the Allen screws on mine. Fits different on each different receiver but I’ve had some extremely tight ones. I normally I put oil on it and slide the upper on. Still tight but not as much friction with the oil.
@furysactorslounge3956 2 ай бұрын
@@itsmillartime6916just gun oil? I’m gonna try that
@itsmillartime6916 2 ай бұрын
@@furysactorslounge3956yes just a little gun oil on there should help.
@furysactorslounge3956 2 ай бұрын
@@itsmillartime6916thanks what block do you recommend for the lower?
@itsmillartime6916 2 ай бұрын
@@furysactorslounge3956 I run a Nylon lower block and sometimes a Magpul bev block. Got the Nylon block off ebay years back but they can be located at Brownells and other similar shops.