I knew somone who made the Congreve reproductions by Dent. He told me that they worked well because the ball increases its velocity by curving the end of the track. This means the spring doesn't have to be so strong, note that Congreve's original is weight driven.
@janislohman81259 ай бұрын
Nice job! I first heard of the clock from a book id read called "trustee from the toolroom ". I researched the clock now id like one but even the kits are pricey. Well done whats your next project? Just kidding....really like your clock.
@bobbobtheclock6389 ай бұрын
Hi Janis. Thanks for comments. I have read the "Trustee" book after a viewer brought it to my attention. I see there is a Congreve for auction in Matthews (Ireland) 5th Nov. for 600 - 900 euros - cheap in my view. It has additional dials showing date, date, moon. Assuming you are not in Ireland, you could create your own "Trustee from the Toolroom" adventure by going out there to buy it! Other videos that I am working on concern French Comtoise clocks which I have restored and also the restoration of a turret clock I made but which has spent many years on the wall of a French barn Bob
@ninjatlsss9 ай бұрын
Incredible achievement 😮
@jaredcoleman5376 Жыл бұрын
I love your work hope youre still making awesome clocks!
@jaredcoleman5376 Жыл бұрын
Very cool
@bobbobtheclock638 Жыл бұрын
HI Jared. Thank you for your kind comments. I am not making a clock at the moment. However, I do have to restore a turret clock I made - it spent 12 years on the wall of my French barn as in need of some TLC. I hope to make a video of the retoration. Also, during my time in France I acquired several antique clocks from the Comte region of France and I aml proposing making a video about these clocks as well.
@ForTheWhim Жыл бұрын
Wow, that's absolutely beautiful Bob.
@markallan3842 Жыл бұрын
Lovely
@Soffity2 жыл бұрын
The clock is beautiful. I’m reading a Nevil Shute book ( Trustee from the Toolroom) where the main character makes one so I looked it up and saw yours.
@bobbobtheclock6382 жыл бұрын
Thank you for the comment. A viewer of the video asked if I had ever read Trustee From The Toolroom. I hadn't at the time but I bought the book and am now 3/4 way through.
@Soffity2 жыл бұрын
@@bobbobtheclock638 yes, I saw that comment. Nevil was very keen on engineering, aviation, sailing and metal fatigue and wrote “No Highway”. where the tail falls off an aeroplane. This was a few years before the Comet accidents. Talk about prophetic. The Trustee book is slow but I really enjoyed it... your work is stunning. Do you make them to sell?
@bobbobtheclock6382 жыл бұрын
@@Soffity Hello again. I appreciate your comments. I don't make the clocks to sell because they are a labour of love owing to the awfully long time they take to make - it wouldn't be commercially viable without going to some form of mass production. I don't know whether you have seen my other video about a skeleton clock I made. I also made a small turret clock which I have just brought back from France having sold our house out there. I might make a video about restoring this clock as it is a little the worse for wear having spent 12 years in barn. Whilst in France I collected and restored quite a few Comtoise and Vineyard clocks so I hope to make a video about the similarities and differences of these clocks.
@alkali58412 жыл бұрын
terrible skeleton clock. no bones, no teeth, no skull. 0/10.
@tabhawk54322 жыл бұрын
Are you familiar with Nevil Shute's Trustee from the Toolroom? It's the one book I reread from time to time. It takes place shortly after WWII and features Kieth Stewart who writes articles for a miniature mechanics magazine. He embarks on a journey from England to Tahiti to recover lost diamonds for his niece for whom he is trustee. The story is primarily about the assistance he receives from many people along the way who know of him through his writing and in particular about a series of articles on machining a Congreve clock.
@bobbobtheclock6382 жыл бұрын
Well, l wasn't familiar with this book but owing to your message, my wife bought it for me as a Christmas gift - will read in new year. I hope my clock lived up to expectations.
@Soffity2 жыл бұрын
That book brought me here too.
@kellyluck16262 жыл бұрын
I love these. I'm thinking of building one of my own, using some wood plans I found online. I love clocks with unusual mechanisms, especially rolling-ball types, and this one is frankly beautiful. Nice job on it.
@bobbobtheclock6382 жыл бұрын
Thank you very much for your very kind comments. Good luck with yours.
@marwanshwaiki7772 жыл бұрын
WOW. a great clock. it is my dream to make one.
@perfume68152 жыл бұрын
透明のガラスのなかに金色の冠👑かぶった城さまいるみたい❤️☕️😌💕
@helpmaboab72 жыл бұрын
I wonder what the working escapement looks like close up.
@REV15173 жыл бұрын
Absolutely beautiful!!!
@andrey-youtube3 жыл бұрын
Super👍👍👍
@andrey-youtube3 жыл бұрын
Super👍👍👍
@bobbobtheclock6382 жыл бұрын
Thank you 👍
@Roadrunner483 жыл бұрын
A really interesting and fascinating watch. It would have been better to put the camera on a tripod. The wobble gave me a headache!
@minakshichannel86243 жыл бұрын
Nice.
@bijankumar29223 жыл бұрын
Oh My God ! It's really wonderful engineering works.
@SteveTK4203 жыл бұрын
Bob, did you buy the glass dome to fit the clock, or make the clock to fit the glass dome
@bobbobtheclock6383 жыл бұрын
Hi Steve. The size of the clock was predetermined. I bought a dome which was somewhat larger than the clock. However, in order to make the clock and dome a pleasing fit together, I turned up some feet to raise the clock within the dome. Hope that helps. The dome was expensive, even about 20 years ago, I think it cost over £100
@bobbobtheclock6384 жыл бұрын
Hi David. In my manual I have an appendix C in which JW discusses a variety of things. He says that in his clock, he used a spring of .45mm but suggests that a .50mm would be suitable. Regret I cant remember what I used - I may have bought the nearest available to these sizes. JW also says that if the .50mm spring is used, the barrel arbor should be machined down from 3/4 inch to 5/8 inch or even 9/16 inch. He warns against using a spring which is too strong because the ball may have difficulty in unlocking the table. JW suggests measuring between the barrel flanges to ensure obtaining a spring that will comfortably fit. Also that the centre holes in the barrel flanges should be finished with a taper broach to avoid parallel sides. Please let me know if you require further info.
@davidforsdike43434 жыл бұрын
Thank you Bob.
@davidforsdike43434 жыл бұрын
Your you tube video has spurred me on to getting back to work on the Congreve clock. Is mostly completed . Have made a couple of changes from JW design. I have used 3/16 brass for the plates and mounted the table on ballrace pivots. [email protected]
@davidforsdike43434 жыл бұрын
Hi Bob I am making one at the moment. Would you know the size of the main spring . It is not specified in John Wildings Book.
@bobbobtheclock6384 жыл бұрын
Hi David I am away at the moment. I will try and answer your question this weekend. Bob
@bobbobtheclock6384 жыл бұрын
HI David. I posted areply about spring strength. Not sure if you would automatically see it. Bob
@timmienorrie4 жыл бұрын
Very nice indeed!
@timmienorrie4 жыл бұрын
Fascinating. You are a skilled machinist to have made it on a Myford. Well done.
@bobbobtheclock6384 жыл бұрын
Many thanks
@waynehilton54434 жыл бұрын
Excellent work. I can’t wait to see your next video. Your Congreve clock is also superb. You have a great skill and knowledge. Wayne.