You can not run that engine without a thermostat you will crack the block . For sure lake water is to cold coming in to the block.

Not a race boat my friend. I’m gonna bet 60 mph at best. And it’s not all because it’s a jet

Jump the Ridge in this !

Nice V-drive you showed.

got that from mikey in mulberry

That hand truck belongs to penske

Nice float!

Found ur channel while waiting for my boat to be fixed the last couple weeks, keep up the good work dude

You live on Fb marketplace just like most of us 😂😂😭😭🤟🏽

Yee Yee! 😎 can’t wait for next week

Mannnnn that’s a sick ride can’t wait to go for some hot laps in that thing

I have a 1997 persuit with twin 2 stroke yammaha saltwater series 2

Do you mean 2 strokes😂😂

I see the baja in the backround

BUT THE BAJA

Been following you for a while now I really love your channel but do you think that maybe you have a fuel pressure problem maybe like a pump I know that a friend of mine had a souped-up truck one time and it ran fine when it idled but as soon as you gave it gas it wouldn't do anything he put a high pressure pump on there and whoa what a difference that made also I think that is one good-looking boat

Btw any pans to put a big block in it

It's your boat do what you want if the transom is rotted on your red yellow and black 1987 baja 240 sport 24ft performance boat from baja motor sports sell it if you want (true stoy all that happend to me)

Love the bajas sad ima ganna watch the next video

You better off using a 2 disk clutch or a drum clutch with lower gearing. That bike set up in that state to run 330 ft

You got it back together real nice but I'd go with an 8" Asuza front spinner wheel - that front wheel is trash 🗑️ 💨

I like the shape of that frame. This was a good video!

My last boat was just like that too the previous owner had laid a piece of wood down on top of the old floor. Was like that when I got rid of it 5 years later was still fine

You should paint the inside of the sides in the cubby holes like white to match the rest of the boat brother. That's what I would do

Obviously u care if ur bringing it up and pretty much making a whole video about the half ass flooring job u did 😂😂😂

get wider bars

These videos make me want to find a beater on fb marketplace and attempt to restore. I have no mechanical bg whatsoever but love watching these videos

Yo bro, you do you don’t have to make everyone happy as long as you’re happy. Everything is great.

Any chance you’re related to daddy long neck?

Love the intro I did watch the other video earlier I didn't see anything wrong with what you've done I've done that before and you're right it's your boat you can do what you want with it. In conclusion all I can say is Amen to that brother and I hope you keep posting love the channel

😂😂😂😂😂 that was awesome

I'm rebuilding a 1992 SeaSwirl. Honestly it comes down to its your project, your boat you do with what makes you happy. Whether you put in $500 or $15,000 doesn't matter at the end of the day its you are doing the project for you.

The intro 😂😂😂 god this channel is good

Jesus and your Family...Amen Brother.

Hahaha is crazy how people intend of giving ah opinion just co and insult bc you didn’t do it there way😅. Nice video I’m always washing your videos ✌🏼 we send blessings from Miami 👍🏻

That’s a beautiful shop

The contact glue is going to act as some type of barrier between. Is it ideal? No! However, for the age of the boat what’s the chances it’s gonna be on the water in 20?

Gotta get that boom 💥 boom in there somewhere! Turn it up ⬆️

You POS! 😂😂😂😂☠️☠️☠️☠️ Next years boat is gonna be ready 🤟🏽

I'm about at the same point with my old Sea Ray 200cc as you are. Probably my boat is worse.. The boat runs good but got some bad/rotten wood inside. I bet my stringers are gone and really doesn't want to put any effort in it. Knowing that rebuilding it properly will take crazy amount of work and time and it just isn't justifyable. I think you did it good enough with the floor aswell as with the rear seat bench aswell. No point to overwork it since you probably got more issues under the flooring. It is always the hardest to determine the correct amount of effort for me since I want everthing to be perfect but good enough truly works fine aswell. Drivetrain however is where you are supposed to put the cash and effort into 🙏 /Best regards, Tobias (Sweden)

The intro was hilarious😂 every single boat manufacturer makes questionable decisions with their construction. Don’t beat yourself up over the haters, half of them probably don’t even own a boat.

F the haters it’ll be fine 🤣

Amen

That’s a sweet boat for 2k

Seen this boat on market place not too long ago, nice looking boat. Few things iv been around boats my whole life, my dads a boat mechanic here in central FL, we have seen all sorts of boats come through our shop, usually when the floor is rotten that means 90% of the time moisture got trapped between the hull and floor and stringers are either starting to rot or are rotten, when this happens the stringers where the motor bolts in are first to go. So I would definitely take a little drill bit and drill Into a stringer to see if you have nice wood or wet wood. Problem with overlaying the floor is your still leaving that rotten wet material there and trapping it between the new material, which in the end is going to cause the boat to be waterlogged. I know it’s a bigger job than you initially thought but do yourself a favor and cut that old floor out completely let the boat dry out and then lay new marine plywood in there. It’s also adding weight to your boat now which puts more strain on the motor. For example we had a customer bring a boat to us in the past had a 4.3 mercruiser ho, complaint was boat didn’t plane like it use to and seemed low on power, come to find out the floor was rotten and they had someone re do the floor and they just layed new wood on top of the old floor, well the boat became waterlogged and was now too heavy and stringers were rotten we advised the customer to either get the boat redone or part ways with the boat since it was now a money pit. Would hate to see this being the case with you. Other than that love seeing the progress on this project, and I also have the same boat as you except mines yellow and I had to get the whole boat redone cause it was rotten and floor was done the wrong way

Looking good 👍🏼

I understand the reason you went with the overlay scheme, Ive got no real issue with that but using what appears to be regular untreated plywood is going to be an issue going forward, It will start to degrade almost immediately. if you keep the boat undercover when stored and out of the weather otherwise and dont let any wet swimmers on the boat, youll have your best bet for prolonging the floor life.

Hey man I like your video and how to boat it coming, I just tough I wold of put some fiver glass resin on the wood so it would last longer. But keep up the good work 👍🏻

Sick

What is that song?