How did you remove chain links

I own a pair of these pliers, but these are to small and a hand pinching monster.

Great tutorial! Would you know the maximum ride height provided by these shocks?

Hi , please can you help me tune my engine in kyosho inferno Neo st 3.0.

I like read it “TT zero two”😂

My ESC wont run with my 19t motor. Its overheating. I want speed for just cruising around my street. What gearing would help? The ESC is the stock TEU101bk. I'm wondering what gearing could help first. Thank you in advance for any advice. I'd like to keep the motor and ESC to save a few bucks but if it turns out i need a new ESC or motor to make it faster I think I'd just go brushless, but I think even on brushless I may need to change the gears anyway. It works with my old nimh batteries but as soon as I put a 2S lipo it will run for about a minute or two then stop. Put the nimh batteries back and it works again. My nimh batteries are old and lost most of their life so they need to be replaced with lipos anyway. When my nimh batteries were new i got 30+ min runtime straight with no issues.

What a great video on Spur & Pinion gear replacement, and I love to hear your voice. Thanks buddy~

It still looks as good as new. Even though there's no construction manual for this model steam roller.

Where do I buy this kit as it contains 2 washers that fit between the rear wheels on axle to firebox

Thanks man! Worked for me.

I got the same model and I do find the burner a lot fiddlly I'm going to come up witha better way, so wish me luck 🙏 also I can see you can get a remote. So for this I'm getting a cheap RC car remote Stiring function and add it hopefully all works it does in My head. But I'll see and if doesn't life goes on.

So these don’t pump water through the hose? I’d always assumed they would.

what are the name of the the on road one please

I have recently got my hands on a TT01 and started upgrading parts, starting with all ball bearings to replace the plastic bushings. I noticed there is a plastic bushing next to your spur gear, then ball bearing towards the center drive shaft. Is this supposed to be replaced when replacing all plastic bushings? I was a little confused when I saw it....I noticed Tamiya ball bearing 1280 is pretty close to the size and the circumference looks the same.

Miss going brookthorpe

Этот регулятор потянет 775 коллекторный мотор.

❤🎉😮😊. ไฟไฟไฟไฟไฟแอดพ์.

i disllike this kind of ESC and motor. they are not "plug and play" type but you need to solder the wiring by your own, it pretty get thing wrong easily if you are not a skillful welder. I think the factory of the ESC and motor just want to save the cost. many other choice in the market has "plug and play"

Omg🎉🎉🎉🎉 The queen of the shelf😮😮😮 Amazing and exclusive rc car by kyosho

the class is not the wheel base 0-4-0 its a class d tank

My TE1A was the first Christmas present I got after my dad died very young. It will always be with me and now entails the grandkids. It’s now 52 years old and still runs sweetly.

Lovly model

Hi what's the length an width and height of lipo batterie in the tt-01 tamiya chassis

I am also using a 10.5t but what temp is the motor?

Im more into E cars trying to get my first Nitro Teuggy and this platform and brand is the one im getting would you like to do a video like a simple maintenance? I know its expensive thats why im into Lipo truggys but this one is insanely beautiful 👌

Would you recommend different tires or those are good? I wanna get one of this truggys

Ive noticed even in some model rc cars and even in my train reverse is faster

mines got a broken front diff and a seized engine :( .. maybe im fixing it someday, for now ive entered 1:5 2 stroke rc's .. loving it so far :D

Anyone remembers that special anti-spark grease which is for the contact surface of the resistor?

By far the worst thing ive ever ordered for my Tamiya are these yeah racing shocks.

Mine is really loud. Is yours loud too? It’s my first train set I didn’t expect it to be so loud

This wont work when you used the correct lexan paint.

I still have mine, an uncle bought it for me & I remember the price mark being on the box, £7.25 was a lot of money back then! When I was a bit older I told my Dad I was going to sell it to buy something else & he said he knew someone who wanted it so I gave it to him to pass on & he brought me some money back the next day & that was that. Forward another 25 or so years when I’m clearing out his house following his death & I find it squirrelled away in his wardrobe. Bless him.

It'd a Kyosho Alpha GP ; not Pureten Mk1...

❤😂🎉😢😮ไฟไฟพำสาล

Hello. Do you know if the parts for the TT01 same as TB01? 😊

I’ve just found my old engine from when I was a kid and it’s in need of a little TLC… this has given me hope that it’ll be back up and running soon!

Wasn't that easy for me, my receiver got hot, been trying to plug wires in many different ways, still got nothing...

Amazing my friend you just won a new subscription amazing review you really did an amazing job. I was using the Noble MB4 because im lefty i control da steering wheel with my left hand.. So i saw this online and brought it 10 minutes a go and this is what i was looking for because 15 year ago a only use remote with sticks.. Thank so much for the amazing review

That flywheel came off rather easily! Aren't those pressed on? What's to keep the flywheel from slipping on the shaft?

Hello. What is the exact material of the drawers? Are there 2 x 1 mm Polypropylen glued together, or 1 x 2mm PP ? How thick ist the bigger outside plastic? 3mm, 4mm 5mm or even more? Thanks so much. I need to build around 10 hauler bags for my RC stuff. Kind regards.

can you recommend which one I should buy ESC for 10.5t brushless 3800kv motor?

I’m currently building my NIB txt-1 kit while watching this video for motivation or else I won’t build it at all! 🤣🤣🤣

Since this is s surface radio the on/off switch is for non electric powered vehicles such as 1/5 scale gas buggies. The electrics system is totally separate and self powered so thus the need for the on/off switch. Same idea as a gas or nitro aircraft for an air radio

What's the part number for the bearings? Please.

I installed my sport tuned motor I'm yesterday and it blew up after 5 minutes

Hi my lads SR1a has a similar problem of running better in reverse than forwards. Have orders new seals but what’s the best way to clean up the tubes of scale? Kind regards Simon

I just bought one complete with controller all working. Hardly used with spares for £82. Have no idea what to do with it, but should be fun learning a new hobby. I come from FPV drones, so it won't be a dead start. Thanks for the playlist, will come in handy.

I’ve just got hold of one of these today. A friend of mine was clearing out his workshop as he’s moving. I was helping him move and we found one of these. I said if he didn’t want it, I’d have it and he said I could have it. Properly chuffed with it. Now I just want to get it cleaned up and running again. Someone else that was helping recommended getting it pressure tested first. Is there anywhere you know of where I could get mine tested?