Maxx Bear

Пікірлер

@oldrabidus2230 Күн бұрын

Try cutting/snipping small serrations on the softened brass 1-2mm down before filling with lead? Will probably expand at lower velocities.

@maxxbear5014 Күн бұрын

Thanks I’ll give it a try. Thanks for watching.

@oldrabidus2230 Күн бұрын

@@maxxbear5014 I tried what you did a few years ago. It was an interesting experiment. I wish I could put a cannelure on them for a good crimp. Always makes me nervous loading into tube magazines.

@DJF38 2 күн бұрын

Could you confirm the kind of radiator you put in your Willys? When I look up 77 Corolla it shows the lower hose on the drivers side.

@maxxbear5014 Күн бұрын

www.ebay.com/itm/224579339554 This is the link I bought the radiator from. Thanks for your question.

@DJF38 Күн бұрын

@@maxxbear5014 thank you!

@samerca1 8 күн бұрын

What is the thickness of the tool holders that you are using? 3/8 or 5/8?

@samerca1 8 күн бұрын

Is it imperial or metric from the factory?

@samerca1 8 күн бұрын

Hi thanks for the video. Is the motor the 800w version? Is it powerful enough for your useage?

@maxxbear5014 5 күн бұрын

I’ll try to answer all your questions tonight I’ll take a look at it there hasn’t been anything I couldn’t do on it

@GeneLucas2941 10 күн бұрын

Nice! No keyholes! Will try your tail wads on my Lee 7/8 oz drive key slugs! Seems to group tighter than AA wads. Also a good backup for SHTF when I can't find regular wads anymore. Great vid! Thank you!

@heyyoubuddy6749 21 күн бұрын

Hey there how are ya? Great build! I’m looking at doing swinging pedals to my 69 cj5. What pedal set up did ya use? Also sir what drivers side exhaust manifold are you running? Thanks for sharing have a great day!

@maxxbear5014 21 күн бұрын

To be honest, I just went on eBay and bought the cheapest set of swinging pedals I could find on there. I think they were from a Honda 2000 I think the 2000 is the model I’m using the standard rear exit manifold on the driver side. The reason I could use that manifold. is because I switched around the steering I put in a Prius electric power steering in a Toyota truck steering box mount to the outside of the frame. You could just search some of my videos and you could see how all that was done. Hope your CJ turn out great thanks for the question.

@dylanbraamse8365 28 күн бұрын

Maxx Bear can a howdah pistol 20 gauge fires slugs at an elephant from a Howdah?

@user-xj6iy7jx6k Ай бұрын

do you still have this body and is it for sale

@user-xj6iy7jx6k Ай бұрын

do you still have the old windshield frame for sale?

@maxxbear5014 Ай бұрын

Actually, yes, I still do. I still have the whole front end but I picked up a rusty old bed from a model A pick up truck. I’m going to make a kind of jeep pick up truck using those parts the window frames from C&C are pretty good units

@user-xj6iy7jx6k Ай бұрын

@@maxxbear5014 thats coo, what about the rusty tub you still have that? is it for sale

@maxxbear5014 Ай бұрын

@@user-xj6iy7jx6k the tub was trash. Go on a long time ago

@we773 Ай бұрын

They made that way from the factory.

@maxxbear5014 Ай бұрын

Thanks. Yes it is. I learned that after this video but I would’ve made the bumper the same way anyway.

@we773 Ай бұрын

@@maxxbear5014 I agree with you don’t like the asymmetrical look and cut mine to match the other side as well. Just looks better IMOP.

@WUBBA_LUBBA_DUB_DUB. Ай бұрын

The adjustment screws are on the underside

@ashkanaz6598 Ай бұрын

Reloading black powder shotgun shells with To light up the night sky

@mikeoneil5741 Ай бұрын

i used plumbers putty, but your idea is better. thanks.

@justsomeguy9700 Ай бұрын

Would I be able to seal it with bee's wax?

@maxxbear5014 Ай бұрын

I don’t quite understand your question. Do you mean seal it after you crimp it

@justsomeguy9700 Ай бұрын

@@maxxbear5014 sorry for being so vague but I meant can I seat them a little deeper and then use beeswax to seal them from moisture?

@maxxbear5014 Ай бұрын

@@justsomeguy9700 if I was trying to seal them, I would probably use a little bit of clear lacquer around the top

@tripplebeards3427 2 ай бұрын

Sweet! I bought a vintage craftsman press for $8 at a thrift store that clamps a drill in place. It works great but I have to mess with getting the drill level. I have a 4 pin roller. Works great on my 10 gauge loads.

@maxxbear5014 Ай бұрын

I also load 10 gauge I think my roll crimper is from precision. I think it only has two pins but it works great. I’ve seen those clamp on drills I think it should work pretty good

@tripplebeards3427 Ай бұрын

@@maxxbear5014 yeah it works awesome for a seven dollar used press. I like yours better though it’s pretty fancy.

@charlesloar3210 2 ай бұрын

What thickness sheet metal di you use? Watching for the 3rd time. Starting today on the Veep.

@maxxbear5014 2 ай бұрын

18ga

@charlesloar3210 2 ай бұрын

Great Video. Will be doing this to the CJ3A. How much did you move it back? What was the total length of the original cut

@maxxbear5014 2 ай бұрын

I’ll get it for you the next time I’m in the garage. Thanks

@maxxbear5014 2 ай бұрын

4 3/4” back. 5 1/4” deep

@charlesloar3210 2 ай бұрын

@@maxxbear5014 Thanks.

@paulsiviour7001 2 ай бұрын

I was hoping you would show us how to weld it as well. Thanks for sharing your knowledge.

@maxxbear5014 2 ай бұрын

Paul. I just use 27 wire on my mig welder, then filed the outside smooth was a pretty simple process. Thank you for your comment.

@forestgrump2168 2 ай бұрын

thanks for the video! thats great.

@Brianbri-nq3cc 2 ай бұрын

Nice👍

@Brianbri-nq3cc 2 ай бұрын

Sweet!👍👍👍

@charlesloar3210 2 ай бұрын

Great Job! Need to do this to the CJ3A.

@charlesloar3210 2 ай бұрын

Great Video! How long are the CJ5 seats from the rear of the seats to the front of the bottom cushion?

@maxxbear5014 2 ай бұрын

They are 22”. Thanks for watching the video.

@usuarionaocadastrado9104 2 ай бұрын

Aqui no Brasil nao existe mini shells pra vender, eu fazer alguns recarregados, você usa a mesma quantidade de pólvora que um cartucho normal?

@EdwardFredericks-yt7tj 2 ай бұрын

Plastic has a “ memory” . Paper has NO memory!

@maxxbear5014 2 ай бұрын

Maybe I should’ve said previous folds that have already deformed the paper and would be suited to be put back to their original folds

@CarlPapa88 3 ай бұрын

Looks good. Have to remember the mini drill press when I go shopping. 👍 Is anyone making the 4-pin crimp now that TRN stopped carrying it? The hull vice is discontinued too. Saw some of those on Amazon though.

@maxxbear5014 3 ай бұрын

The 2 pin works ok

@CarlPapa88 3 ай бұрын

I like the DIY vice & trimmer. Just need to pick up a drill press.

@jamespollard1670 3 ай бұрын

I'm surprised that you didn't go with duellies ?

@maxxbear5014 3 ай бұрын

Hey, how are you doing? Yeah, I was going to go with Duellies but I would’ve needed a spacer so they didn’t hit the brake caliper then I would’ve needed different Lugnuts these tires are a little hard to get. They are only made by two manufacturers but I’m only hauling my jeep so I think they’ll work OK I do have another video coming out. I’m pretty far ahead on it now.

@hookerlooker68 3 ай бұрын

What size tool bits are using 1/2 or 5/8 ?

@CarlPapa88 3 ай бұрын

How low, from the bottow plate, can it come down? Would be interested to know if it can get low enough to crimp 2" shortshells. Disreguard. Demonstrated the solution @6:30.

@DJF38 3 ай бұрын

Do you recall the final spacer thickness you ended up with between the tub and the frame? I want to make my one. Also how hard were the spacers? Like a rubber tire or more like the sole of a rubber shoe? Thanks.

@maxxbear5014 3 ай бұрын

5/8”. They were made of Delran. It’s a hard plastic type material. It was on the softer side of the Delran scale. Thanks for watching a video.

@pink_love_cat4928 3 ай бұрын

Every mini lathe from China needs some kind of tweaking

@maxxbear5014 3 ай бұрын

For what I use it for it works great. Thanks for watching the video.

@Tallguy511a 3 ай бұрын

What tire size and rim?

@maxxbear5014 3 ай бұрын

285/75/R16. 8” wide rim

@cw2a 3 ай бұрын

🇺🇸🔥🔥🇺🇸

@Kyle-gd5hl 3 ай бұрын

Progress in your process. Thanks for sharing.

@brokeloader 3 ай бұрын

That almost looks like it should have a load range E on it.

@ocean374 3 ай бұрын

Hi maxx looks great nice and wide

@HobbiesHobo 3 ай бұрын

Looks good Maxx!

@kylewood8327 4 ай бұрын

Nice collection! Unfortunately my first Ruger (a .357 Blackhawk) was not purchased until 1990, had S&W’s before. A 19-4, 1982 and a 66-2 in 1985. Still own the 66.

@maxxbear5014 4 ай бұрын

S&W model 19-4 and 66 are nice guns. I never had a 66 but I still have the 19-4. Thanks for your comment.

@CarlPapa88 4 ай бұрын

@6:55 That orange blown out primer is a Monarch, correct? Recently picked up a Maverick, but no ammo yet, besides a random single shell that has the same head stamp.

@maxxbear5014 4 ай бұрын

Like I said, I only use my hulls one time. So anyone I pick up at the range is fair game for reloading cheap ones or not Thanks for watching the video.