8:32 This is the first video I saw that mentioned the transport tabs. I thought they were pat of the fork only to find out after I was all done that they get in the way and make one hell of a racket and had to start all over!
@user-nr6xh2pb2c3 ай бұрын
Que pasa si queda ajustado de más disculpe?
@jbtechnicalwork77644 ай бұрын
Nice information 🙏
@linhlai56995 ай бұрын
Thanks bro
@dealerauctionnightmare46895 ай бұрын
No problem!
@user-zd1pi7gx8y7 ай бұрын
Very helpful video. How thick is the clutch disk when new?
@dealerauctionnightmare46895 ай бұрын
Sorry, I don't have that information.
@elgroso8063 ай бұрын
Anyone knows the Luk part number of the kit ?
@Ebrahimrayes8 ай бұрын
I have alfa romeo Giulietta 1750 tbi .. my question is which target value should I use the 28.6mm or 44.6mm cuz my value 2 - the ruler is (44.09mm)
@elcocho2069 ай бұрын
So after you turn it counter clockwise 12 times you turn it clock wise 10 times and that locks it?
@dealerauctionnightmare46899 ай бұрын
Turning it counterclockwise unlocks the clutch. You can't relock the clutch without special tools.
@elcocho2069 ай бұрын
@@dealerauctionnightmare4689 yes but when you turn it counter clock wise 12 times after that how many times do you turn it clock wise. Or do you just hold the key and turn it until you don’t feel tension on it?
@elcocho2069 ай бұрын
I have the key tool, my question is after you turn it counter clockwise do you hold the key and let it turn clock wise till there’s no tension?
@dealerauctionnightmare46899 ай бұрын
@@elcocho206 Yes, release it slowly. It's under spring tension for returning. It will stop automatically.
@arifinsidabutar85799 ай бұрын
What type of the grease that youput on the input shafts?
@dealerauctionnightmare46899 ай бұрын
just use a light high temp grease. I have used a light coating of wheel bearing grease.
@alejandroochoa35419 ай бұрын
Olive oil, Crisco, Mrs. Butterworth, ANYTHING works. Its just to slide things easier, use a minimal amount.
@mikeberger30669 ай бұрын
how about explaining istead of stupid music wtf
@ugkhan92510 ай бұрын
Hi, Thanks for this video, it is very helpful. I just need to ask you one question. My clutch actuator has 3 holes to connect with the transmission and then there is a spring on top, which is not fixed with the body and then there is a bearing at the top, which is again not fixed. I don't remember when I took it out, whether it was fixed or as it is. Could you tell me if I have to find any other part, which must be attached to the actuator? I tried to buy one from parts geek but the one they sent me was smaller and 2 holes for bolts. Please guide. Thanks.
@dealerauctionnightmare46899 ай бұрын
I'm sorry, I wouldn't know to be able to give you any guidance.
@ugkhan9259 ай бұрын
@dealerauctionnightmare4689 Thanks for your reply, but I figured it out. It's done. My car is fixed now.
@dealerauctionnightmare46899 ай бұрын
@@ugkhan925 that's awesome! Glad you got it fixed and sorry for not being able to assist.
@GunsGearNFreedom10 ай бұрын
Thank you sooo much for providing torque specifications in your video. Saved my life. Could not find them anywhere else. Where did you find them?
@dealerauctionnightmare468910 ай бұрын
They used to supply a USB drive inside a new clutch kit. That's where I got these from.
@porfiriosalas280010 ай бұрын
Is it an Ecoboost 2.0?
@dealerauctionnightmare468910 ай бұрын
It was.
@mechanicaan10 ай бұрын
❤❤
@2WheelDerness10 ай бұрын
Much thanks, it helped me a lot!
@rookiemvp2008 Жыл бұрын
Hell yeah, great video
@dealerauctionnightmare468911 ай бұрын
Appreciate it!
@claudiodemelas7677 Жыл бұрын
Non capisco perche mon rimane la quinta alla renault Captur
@brodyplummer4948 Жыл бұрын
My locking/transport tab on the outer two of the three or bust it off. Any advice.
@dealerauctionnightmare4689 Жыл бұрын
I'm afraid you're going to need a new clutch.
@josecastro6624 Жыл бұрын
👍!!!
@ricardovillalobos2578 Жыл бұрын
Hello where can you provide me with the part #of the specialty tool, could you tell me where could I purchase it thanks.
@dealerauctionnightmare4689 Жыл бұрын
Page 9 shows the part number for the tool. aftermarket.schaeffler.us/medias/BR-0244-en.PDF?context=bWFzdGVyfGRvY3VtZW50c3wyMzk1NDIwfGFwcGxpY2F0aW9uL3BkZnxkb2N1bWVudHMvaDZlL2g5OC85MTY3MjEzNTkyNjA2LnBkZnw2MzA4NDU2MDhiZWU1Y2U3MTI0MGI5ZjM2Y2YzZDM1NzI4MzAzYmVmNTBkZmQ0NTAwNTIxNjUzNzQ0OTBhMjk1
@CityOfEvil95 Жыл бұрын
a brand new clutch doesnt need to be reset right? only a used clutch needs reset if its in good condition
@dealerauctionnightmare4689 Жыл бұрын
That is correct.
@pubgfunny4 Жыл бұрын
Why transmission whining ddct c635 after replace hydraulic unit
@1117robby Жыл бұрын
Mines currently making the same noise 😢
@dealerauctionnightmare4689 Жыл бұрын
Oh NO! They replaced the engine & transmission in this one.
@1117robby Жыл бұрын
@Dealer Auction Nightmare No check engine light on..no smoke, car only has 69,878 miles...I'm taking it to ford tomorrow hopefully it's just the timing chain and not the motor 🫣
@dealerauctionnightmare4689 Жыл бұрын
@@1117robby my son's was the same way. Just all the noise.
@ricgomez1 Жыл бұрын
Sounds like its the output muffler bearing or maybe the piston return springs.
@ManuelGarcia-fs3mf Жыл бұрын
I think it’s a 1970s one with a wide body 😂
@dealerauctionnightmare468911 ай бұрын
I wouldn't doubt that! 🤣
@imtotalyahuman5157 Жыл бұрын
Man fuck Rap God that's damn Auction Devil
@bathanmark Жыл бұрын
Can you for a video for flushing or topping up trans oil on this? Thanks
@dealerauctionnightmare4689 Жыл бұрын
This is the best info I found; www.dodge-dart.org/threads/performing-service-on-ddct.42433/post-589633
@indicapalacios Жыл бұрын
Hello, this kit fit on a Ford Focus 2014 automatic?
@dealerauctionnightmare4689 Жыл бұрын
Yes, it's for all years 12-18
@indicapalacios Жыл бұрын
@@dealerauctionnightmare4689 thanks 🙏
@dealerauctionnightmare4689 Жыл бұрын
@@indicapalacios you're welcome.
@user-xg2kd5wc8e Жыл бұрын
Thanks Sir, a good demonstration.Unfortunately,I have to import this clutch kit which is not found in Tunisia.
@bridgetrobertson7134 Жыл бұрын
Chased down the kit used in the video. They don't sell it any more. Nice.
@dealerauctionnightmare4689 Жыл бұрын
Wow, really? The clutch or the tool?
@jesusmancha8286 Жыл бұрын
So did u cut ur value 1 in half and that’s how u got the 10.5 turns ?
@dealerauctionnightmare4689 Жыл бұрын
Not sure how they came up with the 10.5 turns. I know on the Ford DPS6 trans you can hear them unlocking around turn 10-12 and they recommend turning no more than 13-14 turns.
@santiagopaz369 Жыл бұрын
Pregunto:... Es el mismo clutch para un Alfa Romeo Giulietta o es diferente el sistema? Pregunto porque voy a cambiar un clutch de ése coche y me dice el cliente que no encuentra el rep - set para ése Alfa Romeo, si es que sí le queda el mismo clutch me podrían proporcionar el número de parte? Se lo voy a agradecer mucho, saludos.
@dealerauctionnightmare4689 Жыл бұрын
This should be what you're looking for; aftermarket.schaeffler.us/en-us/catalog/auto-parts/clutch-attachment-parts/clutch-kit/clutch-kit-luk-repset-2ct/p-TA-479-6020004000
@santiagopaz369 Жыл бұрын
Le agradezco mucho su atención@@dealerauctionnightmare4689 y unas preguntas más, que precio tiene el clutch y la herramienta se vende o la pueden rentar? De la herramienta pregunto porque solamente sería para una instalación en éste vehículo.
@dealerauctionnightmare4689 Жыл бұрын
@@santiagopaz369 Unfortunately, I wouldn't have any idea about the costs for the clutch replacement or the tool.
@byronmartinez492 Жыл бұрын
I have a question, when you did 10.5 revolutions is because is the half of your value 1? Or is a standard ruler?? If my value 1 is 24, I do 12 revolutions or I have to do 10,5?? Thank you!
@dealerauctionnightmare4689 Жыл бұрын
Not sure how they came up with the 10.5 turns. I know on the Ford DPS6 trans you can hear them unlocking around turn 10-12 and they recommend turning no more than 13-14 turns.
@2WheelDerness10 ай бұрын
@@dealerauctionnightmare4689 why it is called dual clutch? I see only one dry disk :)) I just want to understand better this gearboxes and don't see any differences than normal clutch assembly
@dealerauctionnightmare468910 ай бұрын
@@2WheelDerness has 2 input shafts on the transmission.
@jaytee12345678902 жыл бұрын
Is this the same transmission that comes in the 12-16 Dodge Dart 1.4 turbo?
@dealerauctionnightmare46892 жыл бұрын
I do believe it is the same trans.
@muhammadumair76632 жыл бұрын
I have VW golf 1.4tsi there is error after diagnos "System voltage low" Any one know what is this error. Engine start after shift the gear car not running. Kindly help me out
@dealerauctionnightmare46892 жыл бұрын
That will require some pin point checks for voltage at the problem module.
@rayneeshkirland95012 жыл бұрын
Where can I get this exact tool set am not see it on the Luk official website I got dsg dq250 transmission I was wondering if the dq200 tool set work with the dq200 transmission
@rayneeshkirland95012 жыл бұрын
Dq250 6 speed transmission *
@dealerauctionnightmare46892 жыл бұрын
This is the only one I could find; www.ebay.co.uk/itm/363323250260
@lanea.35122 жыл бұрын
If I removed and am then reinstalling the same clutch, do I need to worry about resetting anything or should it be good to go as-is? Thanks!
@dealerauctionnightmare46892 жыл бұрын
You will have to reset the clutch being taken out.
@RicardoGonzalez-jj6uo2 жыл бұрын
Saludos me podrán dar precio de la herramienta para powershift
@dealerauctionnightmare46892 жыл бұрын
The tool I use is in the description.
@MichaelSwan662 жыл бұрын
great video ? i ordered a LuK clutch kit will i have to do this to the new clutch or does it come pre set?
@dealerauctionnightmare46892 жыл бұрын
New ones come pre-set. You'll have to do the release/unlock procedure after you install the clutch and before you install the transmission back into the car.
@MichaelSwan662 жыл бұрын
@@dealerauctionnightmare4689 Thank you :)
@dealerauctionnightmare46892 жыл бұрын
@@MichaelSwan66 you're welcome!
@carloschataing10062 жыл бұрын
@@dealerauctionnightmare4689 hello I just got Lukas double clutch what minute on the video is release/unlock procedicure?
@dealerauctionnightmare46892 жыл бұрын
@@carloschataing1006 this is just the reset. The release comes after you install the clutch.
@J.PROJECTZ2 жыл бұрын
Where can I buy this tool?
@dealerauctionnightmare46892 жыл бұрын
Not really sure. I read the number on the tool as Gedore KL-0500-721. I searched the web with no results.
@MrTaz07362 жыл бұрын
Where can I get the specialty tools for this Transmission Clutch Change.
@dealerauctionnightmare46892 жыл бұрын
This is the one I purchased. www.amazon.com/dp/B07YWK6MML/ref=cm_sw_r_apan_glt_i_ZT868PAN43YZ4WPTSADF?_encoding=UTF8&psc=1
@carloschataing10062 жыл бұрын
@@dealerauctionnightmare4689 hello. But in this video he did not use that tool
@carloschataing10062 жыл бұрын
@@dealerauctionnightmare4689 i mean did not reset the clutch
@dealerauctionnightmare46892 жыл бұрын
@@carloschataing1006 doesn't matter what tools you use, as long as it gets the job done. The tool kit listed uninstalls/installs clutch and resets a seasoned clutch if it's within the reset specifications.
@FPVNOLA Жыл бұрын
What about oring
@3598892 жыл бұрын
Ok. Can I find a single mass flywheel as a replacement of dual mass one? For this type of gearbox?
@dealerauctionnightmare46892 жыл бұрын
Since this has 2 input shafts, I wouldn't know about that, if it can be done, I'm sure someone has figured it out. Maybe you can contact LUK?
@vykostov4c2 жыл бұрын
Hello, yes Valeo kit wiht single mass flywheel
@3598892 жыл бұрын
@@vykostov4c hi, can you be more specific? Do you know the part number or have link ? I need to change my clutch soon enough as it rattles already. Thanks and much appreciate.