I just got mine and it’s great if you want better quality for the boat it 43 minutes but for fast but still grate quality it’s 15 it is really fast
@fpvbuilds20236 күн бұрын
@@steam_man3765 thanks for watching !
@cruisinsixothree396017 күн бұрын
From what I've read you can link 2 Ace Pro units together to get 8 color prints and they might expand it to link more later on.
@fpvbuilds202317 күн бұрын
@@cruisinsixothree3960 yes right now it is two units I have another ace unit on the way so I can try it
@ian1957ruth19 күн бұрын
Is it true these anycubic multi colour printers create twice as much "poop" as a bambu?
@fpvbuilds202318 күн бұрын
I think its comparable
@thatpspguyАй бұрын
I freaking love mine. Have printed more in the last 2 days than I have in the past year.
@fpvbuilds202329 күн бұрын
@@thatpspguy its a great little machine !
@THEMADFLYERАй бұрын
Yes sir! we back😅 just subscribed come check out my channel some time my friend!
@dkev001Ай бұрын
Clickbait
@fpvbuilds2023Ай бұрын
why?
@williampetzer4540Ай бұрын
Bambu killer 😂😂 what a joke
@fpvbuilds2023Ай бұрын
@@williampetzer4540 i am guessing you didnt notice the questions marks behind killer?
@williampetzer4540Ай бұрын
Anycubic is rubbish and you have no idea of what you talking about Dji is a great company and run well. I have a few of the drones well put together and very well-made. As far as printers go, I’ve had two Anycubic printers and they both gave me problems constantly and the customer services crap. People should stop comparing this printer to the bamboo lab
@fpvbuilds2023Ай бұрын
@@williampetzer4540 unfortunately it is a comparable printer due to its speed and ace system, i never said dji didnt make good drones i just said i dont like them, i build and fly my own drones so i am able to speak on my issues with dji, also i have 8 anycubic printers running kn a print farm and i have not had any issues with any of them other than a nozzle swap.
@MobwalliАй бұрын
you should be able to adjust the purge volume to reduce waste as well.
@archemityАй бұрын
Thanks to this machine, most of Bambu's lineup is cheaper. Competition is great for our pockets.
@fpvbuilds2023Ай бұрын
@@archemity agreed!!! Compétition is great
@oneanother1Ай бұрын
3d printer companies always release their products before they are ready. It still has a long ways to go on the software side, which they will drop support by next year when they released another not ready to be released product. At least bwmbulab will support their printers for years to come. With their kobra 2 pro, they locked the firmware which made you use their app and slicer. I'm not going to go through that again.
@fpvbuilds2023Ай бұрын
@@oneanother1 thats not true, i have the kobra 2 and i dont use their slicer or firmware, i use prusia slicer and cura, the kobra 3 is the first time i have used thier firmware and its actuallu not that bad i will say it does still need some work though.
@patricehonvault2612Ай бұрын
The plane gave the impression of being under speed with the flaps extended, it was swinging from one wing to the other. With the flaps retracted, it was better, it may be necessary to add a little exponential on the roll.
@fpvbuilds2023Ай бұрын
@@patricehonvault2612 thanks for watching and thanks for the tip
@rafaeltorres2886Ай бұрын
Cool video, Anthony.
@fpvbuilds2023Ай бұрын
@@rafaeltorres2886 thank you!
@gadoneitor15Ай бұрын
I recommend changing the thumbnail of your video, I was looking for reviews of the Kobra 3 this week and it was difficult since your thumbnail does not show the printer as such
@fpvbuilds2023Ай бұрын
@@gadoneitor15 thanks for the heads up!
@APxKPАй бұрын
the only thing going for the ACE is that it will be integrated into their other printers but far from a bambu killer. their software lacks.
@bellot1Ай бұрын
no game changer at all. it's garbage
@fpvbuilds2023Ай бұрын
@@bellot1 do you own it?
@AuzzeАй бұрын
Very bold statement "Bambu Killer" seeing you don't own a bambu labs printer.
@fpvbuilds2023Ай бұрын
@@Auzze statements have a period or exclamation point at the end of the sentence, my sentence has a questionmark ???
@NWGRАй бұрын
Good overview, but some bias. Some fact checking: You can print with bambu printers offline; it's called LAN mode. It only uses your local wifi, or you can just print with the SD card. Your security concerns are unfounded, and unnecessary fear mongering. With the A1 you can buy individual nozzles, they don't seem to be available for the kobra 3. You compared the kobra 3 to the X1c; not very fair to kobra 3. The X1c can print materials like nylon, ABS, ASA, polycarbonate, and has an active carbon filter for those materials. There's obviously a bunch of software differences as well; I'm not sure how the kobra 3 handles it, but with the A1 AMS lite, you can have it move from one spool to the next if they're the same color and the first runs out of filament. I like that the ACE can dry filament, but it's only really suitable for PLA or TPU; anything else requires higher than 55c; I print with a lot of PETG and that dries at 65c. My own take on the kobra 3 combo is that their color unit is nicer than the bambu, but the printer is not nearly as well-tuned as the A1. It's good, just not great. Not even remotely close to a "bambu killer". Reliability, ease of use and user experience are all areas that bambu focused on that the other manufacturers are still playing catch-up on. I have two A1s and an A1 mini and have had zero issues with any of them, and zero tinkering or tuning; just adjusting slicer settings for the filament being used, changing nozzles for different materials like carbon fiber PETG and it's off to the races. Like I said in another comment, I'm glad so many other companies are chasing bambu's success, that's better for all of us who use the printers, they just need to fine-tune all aspects of owning a 3d printer; making decent hardware is easy enough, but on its own it's not enough. I'm looking forward to the creality K2. If you'll compare a bambu printer, the A1 would be a direct comparison.
@fpvbuilds2023Ай бұрын
@@NWGR thanks for the long well thought out comment, my security concerns are valid though, other creators have covered this and you can do your owm research on the information, if you dont hook up the bambu machine to the internet then it wont ever update. Again everyone is entitled to thier own opinions, the title is more about the price than anything when comparing machines.
@NWGRАй бұрын
@@fpvbuilds2023 Well I mean, even when directly comparing the kobra 3 combo to the a1 combo, the price difference is marginal; $40 right now, and when neither are on sale, that difference drops to only $10. Believe me, I've done plenty of research on all the privacy concerns because it was something I worried about as well, and by and large, they're unfounded and typical "they're watching" fear mongering. For the vast majority of users, none of that will have any effect on actual usage, even in print farm applications. And like I said, you can print without ever connecting online, and you connect just to update the fw and then go right back offline. The whole privacy things is overblown, especially for something like a 3d printer, when there's all these data-leeching apps we use every single day, multiple times over. So again, the kobra 3 is a very competent competitor to the bambu A1, it's just a bit behind in some areas. They did nail the ACE though; that's a really nice setup and better than bambu's AMS lite. I'm all for competition, but for me to switch or consider another brand, there needs to be a better reason than "they're not bambu".
@marcelzuidwijkАй бұрын
Bambu killer??? Absolutely NOT. Got X1C's A1's (not the mini) and the Kobra 3,... The Kobra 3 is really NOT better...
@777ThibsАй бұрын
I almost preordered one of these. I really want to do multi-material printing, but I don't want more than one ecosystem. I already have Creality K1C and K1 Max.
@fpvbuilds2023Ай бұрын
@@777Thibs sell one of the creality machines and buy one of these, it is worth it.
@CotyF003Ай бұрын
Sell the K1C and get the K2 if you want to stay with the Creality ecosystem. They launched the K2 and have their own multi-material system. I have a Creality CR-30, a Sovol SV07+, and my Kobra 3 should be here today.
@adamklosterman8960Ай бұрын
New to 3d printing huh.
@fpvbuilds2023Ай бұрын
@@adamklosterman8960 nope.
@TaylorBrainАй бұрын
So it does literally exactly what Bambu printers do?
@fpvbuilds2023Ай бұрын
Yes but for alot less money
@finnawennijpels604526 күн бұрын
@@fpvbuilds2023not true...... A1.....
@fpvbuilds202325 күн бұрын
@@finnawennijpels6045 still cheaper than the a1
@d3adlyz3braАй бұрын
we cant be serious with left ear audio only....
@fpvbuilds2023Ай бұрын
@@d3adlyz3bra we appologize, it happened when it was uploaded, we cant fix it now without fully pulling down the video
@anarchyfpv7338Ай бұрын
Good job!
@MassMaineMountainsАй бұрын
Great vid !
@MiquelnezАй бұрын
So, just to be clear. You don't have an A1 to compare with but 'bambu killer' clickbait. And it gets even better. You don't even kbow the price and build size of the A1 to compare with
@fpvbuilds2023Ай бұрын
@@Miquelnez price and size of a-1 is in video, i did a comparison of the products via their websites and i have friends that have the a-1 and other bambu products as well as this is my 14th printer so i think i am qualifiéd to speak on it
@protocolkeyАй бұрын
Thank you for the review, I almost bought an older version of anycubic a couple times. The dryer function is cool, I am looking at designing a mod for my current AMS for that. I am interested in how multi color prints on cardboard spools work over time, bambu chokes on cardboard in the AMS. But wow what is with the Bambu hate club? I am coming from really old qidi and longer printers i bought a P1S combo. You could probably call me a fan boy now, but that is just because I can print stuff fast, and easy, I am not spending all my time upgrading just trying to get a decent print or get hair faster than molasses pours. Bambu is just FAST, really really good prints, problem free it just works, the remote app and other things are unbelievably handy. I have printed 10x the stuff with my p1s compared to the years with my others, its crazy better. I am currently printing a 6ft STARGATE that i would never consider on my other printers, because it would take probably 6 months or more to finish and not look as good.
@kevinroach9380Ай бұрын
Bambu has now worries!
@xXqpXTigerXqpXxАй бұрын
Left ear loved it
@harryvl3013Ай бұрын
literally my first thought
@fpvbuilds2023Ай бұрын
@@harryvl3013 i dont know what the issues is i just tested it with both my headphones and i had sound coming out of both ears
@finnawennijpels6045Ай бұрын
@@fpvbuilds2023 probably because you have mono audio on/ your headphones are mono
@modestcody123Ай бұрын
Not quite there yet. As much as I love to see progress and innovation, this is in no way a "Bambu Labs killer." So many glaring issues just with the placement of ports alone.
@NWGRАй бұрын
Yep. Bambu definitely gave the industry a kick squarely and firmly in the arse and now they're all scrambling to catch up. This is great for consumers. The problem is that all these other companies are scrambling, so design flaws make it to the final product, the products end up rushed to market, firmware bugs, etc.
@fpvbuilds2023Ай бұрын
@@modestcody123 everyone keep seeming to miss the ??? After the bambu lab killer
@mr.k5835Ай бұрын
I ordered one, I think Anycubic is on to something here. For the price it seems like a good value. I also have an X1C and an A1 so we will see how it stacks up. Thanks for the vid!
@fpvbuilds2023Ай бұрын
@@mr.k5835 thanks for watching !
@skynlab2478Ай бұрын
nope
@fpvbuilds2023Ай бұрын
@@skynlab2478 nope as in not a bambu killer? Or just nope?
@skynlab2478Ай бұрын
@@fpvbuilds2023 not a bambu killer , i have A1 , p1s both combo and return this one
@mendelian8768Ай бұрын
Everyone is jumping on the Bambu bandwagon. It is nice to also see alternatives.
@fpvbuilds2023Ай бұрын
@@mendelian8768 agreed!
@DubteeАй бұрын
Bambu is still better. But thanks!, I've been looking at these
@OscarPerez_OxkartАй бұрын
Was this a sponsored video? Curious to see more on the multicolor printing part which is the main reason to buy this printer.
@fpvbuilds2023Ай бұрын
@@OscarPerez_Oxkart no not a sponsored vid, i am currently working on more shooter vids of the multi color unit
@OscarPerez_OxkartАй бұрын
@fpvbuilds2023 thanks for the reply, looking forward for the honest review
@Evo_SpecАй бұрын
Not sure if you're aware but the video only has audio in the left side up to 11:53 and then again later from 20:55 to 25:40. Hope the printer is reliable, it would really suck to lose a multi color print part-way.
@fpvbuilds2023Ай бұрын
@@Evo_Spec no not aware! Thanks for the info, much appreciated i will look into that
@fpvbuilds2023Ай бұрын
@@Evo_Spec good catch, i ill put out an update
@dotrung2007Ай бұрын
Nice review. One small mistake though. At 23:10 $1,299 is the Combo price, meaning its the X1-Carbon + AMS
@stathisnikou1588Ай бұрын
Any ideas where can i purchase this one?
@fpvbuilds2023Ай бұрын
I have a dynam spitfire on my site, as far as the hobby king spitfire I don't know, sorry.
@pureblood369Ай бұрын
Just wat it'll go horribly wrong
@fpvbuilds2023Ай бұрын
@@pureblood369 i have a bunch of their printers i havent had any real issues yet
@user-tj6uc1ye8hАй бұрын
Should’ve let your boy throw it😮u suck dad😂😂😂
@leithpinckney87562 ай бұрын
Do you have a website for ordering the Kavan planes?
@fpvbuilds20232 ай бұрын
yes, the website is WWW.FPVBUILDSRC.com thank you for watching !
@Frostymids2 ай бұрын
Do they come with a working cog nowadays? I had a dynam p51 12 years ago. Had to put dang near 4 ounces to the nose for it to fly. It's like no one in china ever test flown them
@fpvbuilds20232 ай бұрын
@@Frostymids alot of the models have been updated some models still need a little nose weight depending on the battery size but the quality has improved.
@rafaeltorres28862 ай бұрын
Hey Anthony, that's awesome will you start carrying the Dynam receives, too?
@fpvbuilds20232 ай бұрын
@@rafaeltorres2886 thank you! And thank you for being a customer!
@fpvbuilds20232 ай бұрын
unfortunately probably not, I carry FRSKY recievers which are great quality, i may start to carry dynam motors and esc's
@adriancuestaablanedo4682 ай бұрын
Check their servo line, really GOOD !
@LemonHead-sq5ws2 ай бұрын
My booty stank
@fpvbuilds20232 ай бұрын
You should probably wash it
@RubyS.12 ай бұрын
This is great news.
@rickwarner5162 ай бұрын
Looking forward to seeing more from you 👍🏽❤️❤️❤️❤️✈️✈️✈️
@monsteroriginal2 ай бұрын
Mine keeps breaking now waiting on a belt
@fpvbuilds20232 ай бұрын
Really? I havent had any issues with mine,sorry to hear about that
@pirobot668beta2 ай бұрын
Klipper...the secret-sauce is Klipper and resonance calibration.