Love the 365. Bought it new in 2023. Just noticed, after one year, the front sight is dead. Sig stated their sights are warrantied for (5) years. They sent a prepaid label to ship back the slide to replace the front sight. Hopefully the replacement will last longer.

Interesting and honest video. Very helpful. This video helps people select their EDC. And that saves lives. Thank you, sir.

In the pic of the original firing pin next to the improved one, you can see the wider, tapered, base of the improved one. Much stronger profile.

Thanks for making this video. One thing would have helped make it better. When you showed what and where you polished, you didn't hold the part still for a second. If you had held each polished surface still for just 10 seconds, it would have been much easier to see where the polishing was done.

For everyone saying they get light primer strikes. First make sure you didn't put your hammer spring in upside down. If that's good then just get an enhanced firing pin instead of using a milspec hammer spring and defeating the whole purpose. With these lighter springs and an enhanced firing pin you should have no problems even running the cheap steel ammo.

I Looking for 1 in moa..want 4 hunting and long range is the crosshairs dark enough for hunting

"We have already gone through"....NOT "We have already went through".... Also "Should of went" is not English...It should be "Should have gone".... If Americans are going to borrow my language (which took my ancestors 1,500 years to develop), the least they can do is take care of it...

My new one April 2023 is as tight as a peedo's girlfriend

I would like to shoot 200 grain sst out of this if I buy one. Has anyone loaded light bullets like this and how was the accuracy.

Would’ve been a better vid if showed how to uninstall/install the trigger for the newbies. And provide in-depth logic on polishing those surface areas with sandpaper vs other methods.

Buy an expensive gun to match an expensive watch. Nah. I’ll just not buy the watch and put that money toward training and Ammo.

This would be more believeable if you pulled the trigger from the SAME ANGLE on each test.

The solution to Sig P365 solution issues is to get a Glock 43 instead, zero issues except for the crappy stock sights🤣

This gun is always a bad news bought one 3 mos ago still giving me ejection problems frustrating I should have listen to people with same issues I thought it’s 2023 all the bugs are gone!!😡😡😡

Mine was made in March of 2018. Has had about 2,000 rounds through it with no malfunctions. So maybe I got lucky with mine.

You ran all ball ammo. .. of course it feeds ball ammo

Just got one and put 200 rounds through it today. 150 rounds of Federal steel case and 50 rounds of Hornaday self defense. Zero malfunctions and very accurate! I had trouble at first finding the right grip but after adjusting it was fabulous to shoot! Great little self defense tool, smaller and higher round capacity than the Glock 43 I've had for years! Good video brother!

How does the Athlon Ares compare at the highest magnification?

Does anyone have a extra pair of these they are willing to gave away

It's a slide stop. You suppose to slingshot the release.

For an additional $400 the Cronus is Japanese glass compared to Chinese, and for $400 LESS the Midas Tac is the exact same scope without the illuminated reticle. I LOVE ATHLON (I just upgraded from the Midas to the Cronus) but I think this Eres is one Athlon scope NOT to buy (unless you NEED illuminated reticle) otherwise I'd save a few bucks and go for the Midas or spend more for the Cronus. **The Eres is the homerun as far as the spotting scope though I'd LOVE to see Athlon come out with a $2,500-3,000 scope to compete with Nightforce, Valdada, Zeiss, etc. I doubt it could outshine the Zcomp but I'd love to see Athlon go out ALL OUT and drop a HIGH HIGH HIGH end optic!!

I installed these on my .300blk but I kept experiencing light primer strikes

Easy to drop weight pulling it at different angles on the trigger. First pull was about flat, last pull was almost 45 degrees

I've had one for a couple of years, great gun, no problems...

Love your cost breakdown, seriously considering grabbing one. Weighing up vs .300winmag and .300prc

THANKS TAC!!

Thanks Yac!

Those firing pin pic make it seem like they were sintered metal. yeeesh.

I love my P365 but when I wear my tux I carry a PPK . Lol

What kind of safty doe's it have ?

I recently purchased a 365X made in Sept 2021, having just bought the pistol I don't have hardly any rounds put on it. I did check my spent rounds, no primer drag 🤞

i agree with the comments on the angle at witch the trigger pull is tested. stock was pulled straight back. polished was pulled at 20 degrees. springs installed was pulled at 45 degree angle. the angle affects the effective rate of a spring. this will not be anywhere near the 3 pound pull at straight back. :(

Hands down the best review of this gun. I'm really juggling whether to get this or a Daniel Defense AR10 6.5 creedmore..

IMI is discontinued on Midway, and out of stock on another site.

Great stippling job! It looks beautiful.

I changed out the springs in the mil spec fire control group of my PSA AR 15 lower and replaced them with the jp enterprises Enhanced Reliability AR Fire Control Spring Set JPS3.5T. Haven't checked the pull weight for lack of a device to do so.However it has been noticeably reduced from the mil spec pull weight. I also did a polish job on all the sear surfaces Pryor to this installation which also yielded noticeable improvement with eliminating grittiness and giving a clean break. The issue I'm experiencing is light primer strikes on rimfire with a dedicated PSA 22 lr upper. NO problems with 223 and 9mm. Im looking for some experience or perspective on whether not I could just reinstall the mil spec hammer spring to increase strike power and leave in the JP trigger spring to maintain reduced weight of pull.

I like the gun so much but from what I heard I would never trust it

Will this kit decrease the hammer strike too?

Never thought of matching my firearm to my watch🤔

Which would you choose of this scope or an Delta Oticals Javelin 4,5-30x56?

Very effective and affordable modification. IMO sand paper is not a recommended method as most people are not able to keep from altering surrounding edges/surfaces when hand sanding. Mothers polish and a dremel or drill that has a polisher tip will be much easier to control and more effective in providing a uniform finish. Glass sheen and almost as clean, break.

Great video!!

Great video.

It's 12/30/2021 my Sig has a date of 8/17/2021 the only issue is with steel case ammo shoots some but my Grandson has a Cinik and it won't shoot steel at all but cycles all brass ammo fine FMJ Hollow points and always look at as many spent shell casings that I can and so far, perfect circle no striker drags I will say that it does need some breaking in especially the magazines leave them loaded with 10 rounds at all times mine are a lot easier to load now over all I love the gun it's a good shooting gun far less recoil than expected I highly recommend.

Mine has bad primer drag and doesn’t seem to like aluminum case ammo.

There is no parallax setting on the 1x10

When you polish the trigger, will it take the nitride-finish off the trigger and risk rusting?

I bought the 365xl tac pac 3 weeks ago 2021. The gun locked up at 30rds. Could not disassemble. Sent back to sig waiting to see. So far horrible gun. I will never believe in it.

Thanks for the great advice! Awesome video!

planning to get this on march or april