What was recap on Raptor do you have more info My Raptor feels weird when it’s shifting it’s exactly how you explained
@BlakeBuildsATL2 күн бұрын
Not a raptor, fx4 6.5ft bed. You may not have a center slip joint like I do, but otherwise it should be the same
@bradyknowzbest11499 күн бұрын
Is this the cause, it happens to mine 2013 f150, weird almost feels like a slight quick hesitation, just when you first get on the gas from a dead stop.
@rotarydriftdreams15 күн бұрын
Damn she’s a screamer, just from the clips you’re so much more comfortable driving it now
@BlakeBuildsATL15 күн бұрын
She hooks a books! Super trustworthy
@davidt332125 күн бұрын
Awesome. I need to do exactly the same thing with mine. Good informative video 👌👌
@BlakeBuildsATL19 күн бұрын
Glad I could help someone!
@innerspace56Ай бұрын
Eye injuries for young fans of this channel INCOMING.
@ivegonemadАй бұрын
This is what I was looking for
@BlakeBuildsATLАй бұрын
Good to hear it!
@BryanSturman92Ай бұрын
This is exactly what I need to see. Thanks brother 👍
@BlakeBuildsATLАй бұрын
I’m happy to help!
@joshuastone3402Ай бұрын
This also fixed my shift issue.
@motofalcons2 ай бұрын
What is the thickness of the polycarbonate sheet ?
@BlakeBuildsATL2 ай бұрын
Depends on the rules. FD is 3/16 windshield and 1/8 side and rear
@eliotellison71762 ай бұрын
💪Saluteeee I need a windshield and driver window on a bmw 325i convertible at a low price and came across your video, will I be ok doing the steps you did for a daily driving vehicle?
@BlakeBuildsATL2 ай бұрын
I don’t recommend this for a daily. Lexan scratches easily and it’s really hard to waterproof. This is a race only car
@user-wm3fc1sk1p2 ай бұрын
9:09 full lock to the right? what the hell was this kid thinking!
@BlakeBuildsATL2 ай бұрын
He’s an idiot!
@user-wm3fc1sk1p2 ай бұрын
That does not look like an S65👀
@BlakeBuildsATL2 ай бұрын
Mo’ powa babeh
@jeffreyrue45692 ай бұрын
Two words... Davies Craig Look them up 🙏
@glassdave4 ай бұрын
I actually cut a fair amount of Lexan and acrylic for boats i work on. I'm sure its been mentioned here but a better way to cut it is with a small three or four inch compact circular saw like the ones used to cut trim. Its always better to use some sort of toothed blade saw rather then anything abrasive. This is still a great alternative to getting a poly windscreen and a lot easier then many people think. Nice work! Enjoy!
@BlakeBuildsATL4 ай бұрын
Sounds like great advice! Thanks. If I did this more that once every couple years, I would totally get a little circular saw
@briizcustoms95432 ай бұрын
Do you recommends doing this on an everyday drive car? I can’t afford to go to a shop and pay $400
@aombarbor4 ай бұрын
I am LS swap + T56 what ecu are you going to run? idk which to get Holley Terminator X MAX 550-918?
@BlakeBuildsATL4 ай бұрын
@126likeaboss what ecu you going to run?
@126likeaboss4 ай бұрын
cannot say thanks enough man! you did a fantastic job with both the car and the video! tandems very soon!!!
@BlakeBuildsATL4 ай бұрын
Thanks brotha! Let’s go get at it!!!
@Luke100mph4 ай бұрын
Nice work bro
@BlakeBuildsATL4 ай бұрын
🙏
@ryand65025 ай бұрын
A 2 bolt diff cover from a Nissan Frontier or exterra will work for this swap. Two holes are better than one. And the S14 subframe in to an S13 will need the chassis to be massaged a little in some spots. Great work guys!
@taoisttiger47027 ай бұрын
Good chop, i think i might be able to handle this one though cutting a perfectly good subframevis intimidating hahs
@roytallericoGunner7 ай бұрын
My 2004 has this problem
@darkmauveshore7 ай бұрын
Very interesting video! I love lexan and think all windows should be made out of it. So I'm guessing typical windshield urethane doesn't stick to lexan?
@BlakeBuildsATL7 ай бұрын
I don’t think so, if you paint the edge like I did, the urethane will stick to the paint, but it’ll peel off the window and look like crap. If you sand it it may work, but I don’t think it will
@srt8powertv8 ай бұрын
Good video
@MrhEurocars8 ай бұрын
hell yeah ! i love how its sounds !!! i love your builds man ! btw what's the different between 427 and 441 ? in your opinion for BMW LS SWAP
@BlakeBuildsATL8 ай бұрын
Thanks! 440ci would be a 4.125 stroke and 4.125 bore, my 427ci is 4.00 stroke and 4.125 bore. Bigger is almost always better, but if your revving it high like this the tolerances have to be really tight for a 4.125 stroke.
@MrhEurocars8 ай бұрын
DAMNN SHES RIPPPER !!!, Btw are u chelsea denofa brothers? When i saw your videos and etc i was like wait a minute is that a chelsea brothers? hold on :D
@BlakeBuildsATL8 ай бұрын
This car was NUTS, but really unsettled it’s whole life and hard to drive. I’m Chelsea’s brother, but not Chelsea Denofa lol. I have a sister named Chelsea
@JDL_MobileRepair8 ай бұрын
Says he doesnt do performance stuff. Then points out performance brakes. Gotta love guys like that.
@BlakeBuildsATL8 ай бұрын
Uh, the stock brakes sucked. The rest of my channel is completely performance based. Gotta love guys that will find anything to be upset about.
@JDL_MobileRepair8 ай бұрын
@@BlakeBuildsATL lmaooo. Bro im the least bit upset. I just found it funny, the irony. Anywho thanks for the vid. Been thinking about doing this for a while now. Wasnt sure how i’d feel about fingering my trucks shaft tho. Thankfully you showed us the method
@BlakeBuildsATL8 ай бұрын
Lube her up good!
@00ctown007 ай бұрын
I thought that was a valid point for sure. Doesn't seem upset to me, just pointing out the obvious. Many people do this, mainly with upgrades in speed performance. Hey let's race, car is stock tons of power in this mustang, failed to mention the dyno tweak, airflow and header upgrade lol. All in good fun cheers
@RacecarKeaton8 ай бұрын
I know the feeling of putting in so much work and things not going your way. I also know it won't stop you from coming back bigger and better. Tons of positives.
@briizcustoms95438 ай бұрын
Please tell me how did you get it to curve into the shape of the original glass? The store that you got it from doesn’t exist here, where can I buy it? Lowe’s, Home Depot etc?
@BlakeBuildsATL8 ай бұрын
I think you can get it at Lowe’s or Home Depot, but it’s a lot more expensive….maybe twice what I paid. To curve it I start bolting it down in the middle, and work my way out…it curves as you go. Remember, this is for a race car.
@briizcustoms95438 ай бұрын
@@BlakeBuildsATL Are you saying it can not be used on a regular car? I’m going towards Plexiglas vs polycarbonate. What do you think of Plexi?
@BlakeBuildsATL8 ай бұрын
@@briizcustoms9543 it’s not ideal for a street car. It scratches much easier than glass, and needs to be polished every year or so. It’s also really hard to waterproof the seam. Iirc Plexiglass is just a brand of polycarbonate. Just don’t use anything that shatters ( like acrylic )
@briizcustoms95432 ай бұрын
@@BlakeBuildsATLHow has it been holding up? I’ve still not installed mine
@FirstLast-tx3yj8 ай бұрын
I think you had to put so much time in the building process, you did not get seat time to be on the ball under a stressful situation
@BlakeBuildsATL8 ай бұрын
It was definitely not the right event for a shake down.
@Rnfjaydee8 ай бұрын
Car sounds killer!
@rotarydriftdreams8 ай бұрын
It suxs how it ended but the determination not to give up and figure out the issue, got out there, no practice and put down a run was awesome to witness. Crazy how the tires only lasted two laps 😂 but the smoke show was A1 can’t wait til the car is 100% dialed and get some more laps in
@realgenericuser91699 ай бұрын
Great video.
@VividBuildz9 ай бұрын
What bracket and steering shaft is that? got a link?
@BlakeBuildsATL9 ай бұрын
www.woodwardsteering.com
@user-sr7os2er3j9 ай бұрын
Where do I buy these sheets
@BlakeBuildsATL9 ай бұрын
I got mine from professional plastics in Austell, GA
@Funkyflykiwi9 ай бұрын
Congratulations man, exciting to hear it start, oil pressure seems low, would expect a high pressure oil pump in that motor and for it to be around 30-40psi at idle.
@BlakeBuildsATL9 ай бұрын
Thanks! Oil pressure is a bit low, I’m hoping it’s just because of the misfiring/rich conditions. It’s a dry sump oil pump that was custom made for it to have 95psi at 9000rpm. So the other explanation could be that it has a really wide pressure range and will go up through the rpm range.
@JohnEugenio9 ай бұрын
Amazing build and yes the sound is amazing! Witnessed live All the best in racing!
@RocketSlider9 ай бұрын
I think I know how to rebuild my M50 now lol
@BlakeBuildsATL9 ай бұрын
Go for it!
@sottpexploit10 ай бұрын
got instagram? would like to reach out about a built m50/ building an m50
@BlakeBuildsATL10 ай бұрын
@blakevanthof
@sottpexploit10 ай бұрын
@@BlakeBuildsATL messaged ya :)
@kezdolbeck288110 ай бұрын
how is the beamer's windshield holding up?
@BlakeBuildsATL10 ай бұрын
Seems to be fine to me. I had a lexan windshield on my e36 too and polished it once after 3 years. Remember, these cars aren’t dailies. Track only.
@slideordie240810 ай бұрын
Facts 😂 worth every second of it
@CHOPCHOPCHOPRAAAAHHHHH10 ай бұрын
Bro are you still alive ? I missed ur content
@BlakeBuildsATL10 ай бұрын
Haha I’m still alive and I’ll be getting back to making content very soon!
@CHOPCHOPCHOPRAAAAHHHHH10 ай бұрын
@@BlakeBuildsATL thank god you’re still alive hahah , okaayy I can’t wait for your content !! 💯💯💯
@HighGearAutomotive10 ай бұрын
Cool stuff good luck with it
@DavidSmith-fp3dp10 ай бұрын
Thanks for the video, any chance you have a link to where you got the O rings?
@BlakeBuildsATL10 ай бұрын
My friend happen to have a rebuild kit from Moroso, but I heard they don’t sell them anymore. That’s why I put the sizes in the description. They were nothing special as far as I could tell.
@DavidSmith-fp3dp10 ай бұрын
@@BlakeBuildsATLAh cool thanks for your help, they don't make it easy and it's not worth sending it half way around the world lol
@AndrewGallagher2000SC10 ай бұрын
Just completed this today and it resolved the clunk when starting from a full stop. My 2016 f150 is smooth once again.
@baby-sharkgto490211 ай бұрын
Helll yeah
@davidreed607011 ай бұрын
That is a chunk of motor and I bet a chunk of money
@BlakeBuildsATL11 ай бұрын
💸💸💸💸
@Nova-vz3bo11 ай бұрын
Lets goooo! Excited to see this thing rip. Gonna be insane
@BlakeBuildsATL11 ай бұрын
Me neither! It’s almost ready to start already, just waiting on a couple more parts.
@deleted....2000 Жыл бұрын
How much weight u save
@BlakeBuildsATL Жыл бұрын
No idea, I didn’t weigh the stock windows or the lexan ones. Lexan is significantly lighter though