PurEpoxy-Hawaii

Пікірлер

@aaronfleming7746 2 ай бұрын

Hey, curious how much do you charge for an area that size, the prep plus the epoxy finish? Whole thing. Just to give me an idea

@meerbahrain 2 ай бұрын

Hi, after mopping the floor will be wet, how much time should be given for full drying of the floor before applying the epoxy coating

@akbarnitti 3 ай бұрын

Hello how are you? I’m starting an epoxy business was soon and I must say you do nice work. I have a question what type concrete repair that you use to fill cracks. I know time is money 15 mins you can’t beat that. Appreciate your feedback. Mr. Akbar

@user-bj8cw9fp2c 5 ай бұрын

What did you use for primer?

@tazaxx21 9 ай бұрын

Best prep video I've seen yet.

@kingshobby 9 ай бұрын

Nice job! Thanks.

@mattlehnardt8035 Жыл бұрын

hey I hope you and yours are OK after these crazy fires. I think your promotional video is great, could have some video of some workers or you working some machines or spreading some epoxy, and THEN the finished products, like you have shown. just a little plus to the video , and show YOU talking to add the personal touch. all the best.

@Royg89 Жыл бұрын

thought you couldn’t do epoxy outside due to its short lifespan?

@bigceocraig6552 8 ай бұрын

that's polyurethane

@Nerve93 Жыл бұрын

Thats poor art, youre creating a really aggressive waves on the beach but a clear wayer with no marks of where the waves came from , looks bad .

@robertsmee3469 Жыл бұрын

Non slip or not?

@bambino01988 Жыл бұрын

Love this video

@sydneybrink4188 Жыл бұрын

Shaking my head....No eye protection or masks. Google "what does silica dust do to your lungs"

@KB82424 Жыл бұрын

Just a smooth finish would of done the job as long as the shiny ports are grinded it would be just fine

@tazaxx21 9 ай бұрын

Everything I've seen says that high-solids epoxy requires a rough surface to adhere to.

@jasonraper5096 Жыл бұрын

I was asked from a friend about going into business doing this. I see that it is a good idea around my area and im interested. Do you have any advice for me or is it a risky business. Friend has experience but im financing the ordeal. Just wanted to know the business aspect of it from what i see here. Seems like a big project. Good video though...

@diegocarrillo9573 Жыл бұрын

How is it going so far?

@michaelbacile8439 Жыл бұрын

Just buy some used or cheaper equipment to start off with. That’s your biggest expense. It’s a pretty easy industry to get into, learning the processes is the only part you should be focusing on

@birriaelnene6746 Жыл бұрын

So use pe 100 lvx as a finish coat or polyurethane And use pe 100 as a primer

@birriaelnene6746 Жыл бұрын

Do they sell the primer kit

@ElronHumpperdink Жыл бұрын

That’s so gorgeous

@charltonheston969 Жыл бұрын

The diamond cup wheels I've seen don't have a grit # or say how aggressive they are

@user-ct2tt9zy8h Жыл бұрын

Video needs to be taken off line. Grinding concrete without a respirator is dangerous to any operators health.

@victorbremer8097 Жыл бұрын

You mean removed from Online? Because number one “off line” isn’t a thing. Number two, saying taken offline does not make sense either.

@jodyjennings8472 Жыл бұрын

I used a wire brush sander to smooth crack fill areas and it burned and left black marks in the cement how do I do I get that off? So that I can be sure epoxy will stick?

@OmegaAlphaDu Жыл бұрын

Grind it off

@Villah496 6 ай бұрын

I believe you need a diamond grinder to get that off

@jodyjennings8472 5 ай бұрын

It turned out nice.

@Tiecongli Жыл бұрын

Would the gouge mark visible after applying epoxy paint?

@KB82424 Жыл бұрын

Yes they are😂

@Tiecongli Жыл бұрын

Indeed, I have lot of gouge marks because I want to cut time and didn’t spend time to grind even them down then outcome was quite awful

@powerhouse6175 2 жыл бұрын

They have a Y adapter for your vacuum like 10 bucks so you can use two vacs at once

@luiscarreto450 2 жыл бұрын

Do you have more tutorials on how to use the PE 100?

@aubiparchment3958 2 жыл бұрын

Very professional. How could I get your products to Jamaica?

@rcrg81 2 жыл бұрын

where are you getting your power from?do you carry a generator or do you hook up to the homes power? does it have to be a 50 amp breaker? sorry for all the questions. thanks

@arcarc7229 2 жыл бұрын

What grit were you using?

@RageCityBiscuit 2 жыл бұрын

Gordon Food Service squeeze bottles for your crack filler. thank me later.

@mikek2608 2 жыл бұрын

Are you sure the epoxy expanding in the joints is not a result of using water instead of solvent as final clean? Curious, nice video

@purepoxy-hawaii8786 2 жыл бұрын

not sure what you mean. we use a crackfiller product in the joints. after that hardens we lay down the epoxy. the epoxy doesn't get in the cracks. hope that makes sense.

@elricm13 3 жыл бұрын

With the water mopping the last step, how long do you wait for it to dry?

@purepoxy-hawaii8786 2 жыл бұрын

until it dries up. you do a damp mopping, not soaking wet. usually an hour or so, depending how hot it is that day.

@MotorcycleEnhancements Жыл бұрын

I heard that water may react with the epoxy coating. I've seen others use a power washer to remove impurities, then let it dry and then apply epoxy.

@tedtimmis8135 3 жыл бұрын

I just looked at your gallery. Very impressive especially the floor that looks like the ocean surf. Question: I’m in Michigan with harsh winters and lots of water and slush. In our area, most garage epoxy floors are done with paint chips to hide scratches and imperfections. Would a metallic gloss finish work in a garage?

@purepoxy-hawaii8786 3 жыл бұрын

A metallic gloss would work in a garage as long as you use a urethane as a top coat. We urethane all of our floors to give it that extra scratch proof resistance. Now, it's not bulletproof. You can gouge it with something sharp and heavy, so be careful.

@tedtimmis8135 3 жыл бұрын

Great video. I didn’t realize one needs to do a sanding between each layer of epoxy.

@armandoquezada6184 3 жыл бұрын

What's the process brother?

@purepoxy-hawaii8786 3 жыл бұрын

We have a whole video showing how to epoxy a floor start to finish, but it's only one color, grey. kzfaq.info/get/bejne/fLqni8peuKfIo58.html

@lionintu 3 жыл бұрын

So you filled the crack with sand, but is there a specific type? Then you pour ed a crack filler, I assume an epoxy, was it a specific type?

@purepoxy-hawaii8786 3 жыл бұрын

Sorry for the late response... It's just clean sand you can get at HomeDepot. The crackfiller is something we sell: purepoxy-hawaii.com/store-epoxy/ PP-CF Polyurea CRACK FILLER (2 gallon kit) $250.00 PP-CF is a two parts, high penetration, fast setting, hybrid polyurea for repairing and re-building damaged concrete. The product is a 1:1 ratio, easy to mix system that is 98 % solids and VOC compliant. The PP-CF can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and acts as filler for repairing large spalls, holes and cracks.

@theodorerycroft2090 3 жыл бұрын

🔥

@ConcreteFloorSolutions 3 жыл бұрын

Use ketchup bottles for the crack filler, much easier.

@ebujaepoxyfloorsystemshome9905 3 жыл бұрын

I learnt white floors goes yellow and dark over a short period of time pls what is solution

@purepoxy-hawaii8786 3 жыл бұрын

Sorry for the late response.... We haven't found anything that will prevent yellowing. Possibly, you can use a Polyaspartic as a top coat, and that might work, but I'm not sure. Polyaspartic is supposed to be UV stable. The best thing is to try to get the customer to buy a 2 color floor, so you can mix the white and maybe black to have waves and stripes in it so you don't see as much white like this: instagram.com/p/CRNYnqNtFxd/

@Hi-bb5lo 2 жыл бұрын

Use polyaspartic for the whole floor not just top coat. Epoxy is not uv stable. Even if the top coat is the epoxy still isn't and will yellow.

@youngchubaker7248 3 жыл бұрын

Great video, professional teamwork, and outstanding finished product.

@purepoxy-hawaii8786 3 жыл бұрын

thanks!

@henryrgdelos6398 3 жыл бұрын

Hi, I will use PE-100 for Base on a 110ft2 floor. Do i need to 110oz of B and 220 oz of A on my mixing ?

@purepoxy-hawaii8786 3 жыл бұрын

If it's only 110 sqft, then you need one kit. one full kit will cover 150 sqft. 2 gallons of A and 1 gallon of B.

@purepoxy-hawaii8786 3 жыл бұрын

I made a mistake. one kit will cover 450 sqft. So, you need 64 oz of A and 32 oz of B

Ең жақсы KZfaq

Пікірлер