My 2010 with 145k just gave out. Luckily I was close to home and didn't lose too much oil. We appreciate this detailed video!!
@OurHealingJourney16 күн бұрын
Very good and informative video. We've had our truck for about 6 months and never knew how to change the tire. Thank you for explaining!
@manfredstrappen749116 күн бұрын
Don’t use the non-OEM replacement. It’s even harder to install than the OEM one. Spend a little more and save yourself some time.
@XTZEROG18 күн бұрын
Thank you, Frank! This is an awesome video. The 2010 Civic Si wiper is not stopping. This video helped me fix the problem.
@Gnome6344Ай бұрын
This is totally unnecessary work to remove the starter. Don’t follow this procedure! There are plenty of videos on KZfaq that show a better way.
@duncanweigel9986Ай бұрын
Straight to the point, good info and interesting method. Thank you my friend.
@jereymurray8029Ай бұрын
Amazing vid. What type of grease did you use?
@reginaldregie4023Ай бұрын
The coil cable was out all the time
@FrankHurtAutoАй бұрын
That's why it's called "SIMULATION"
@EliteA46Ай бұрын
This is sigma!
@edderl1943Ай бұрын
Question, my timing belt is wet with oil is that normal?
@Mani_GrewalАй бұрын
If there is oil, your cam or crank seal might be leaking. Replace when the belt is off
@edderl1943Ай бұрын
@@Mani_Grewal awesome!
@archiebold13952 ай бұрын
Very nicely explained 👌
@MFSINPSA2 ай бұрын
I cannot find the top hole on install. So hard to
@ricardosv072 ай бұрын
Buenos días....por favor me puede indicar como lo encuentro en ebay o Amazon..??? No lo puedo encontrar i cual es el nombre técnico para seguirlo...!!!! Muy buen video en todo caso.
@BFGRBLX3 ай бұрын
real
@karandeepkaur51133 ай бұрын
W flashlight holder
@davewilliams34573 ай бұрын
Soooo, you mount the wheel in an unapproved manner because someone has broken the cup? Why not show people how to do it properly?
@AlejandroBailleres-tm5gn4 ай бұрын
Wow you really did a good job 👍💯💯👍💯👍 Please dear where are you from?
@danryan31464 ай бұрын
Thanks
@nunyaf-nbizness4 ай бұрын
Whats the part number for the accord 03-07 please?
@mine1username4 ай бұрын
Thanks for posting this. I have a SUN 1742, which I believe was the previous version of the 1762. Im looking for the service/repair manual for either one. Do you have any leads on that? Also, what's the 'S' key for? My operators manual doesn't mention it. Thanks in advance.
@FrankHurtAuto4 ай бұрын
"S" key is for static and yes I do have the original manual.
@mine1username4 ай бұрын
@@FrankHurtAuto thanks 👍. If it's the service manual that explains how to troubleshoot and repair it, would you be willing to sell me a copy of the original? Or the original if you're willing.
@kenjenkerson23324 ай бұрын
A great video. Thank you so much I use this to change my lower oil cooler line on my 2011 Highlander much appreciated.❤
@zachdaddychris4 ай бұрын
Why not just replace the bushing??you don't have to replace the whole linkage!
@FrankHurtAuto4 ай бұрын
When we made the video, bushings were not available. But yes why waste $$$ if you could get the bushing
@roba62775 ай бұрын
This was a great instructional video! Had this EXACT issue. Thank you so much! :)
@ItodoVincentonah-cc8zr5 ай бұрын
Nice job
@MrPopo-bd1ix5 ай бұрын
What if you have one that goes down to 1000 of an inch? .0001?
@daves24336 ай бұрын
Great how to for balancing, just what I wanted to see! Thanks!
@lsteiner6 ай бұрын
Thank you so much. I inherited a 60 year old, made in Poland, micrometer from my late father, and now I know how to use it! And, it's way easier than I thought it would be. You are a good teacher.
@joesylvester38526 ай бұрын
So u just replaced the whole thing or clips ?
@FrankHurtAuto6 ай бұрын
Unfortunately can’t buy just the clips, had to replace the whole thing
@tech29X6 ай бұрын
Thank you for the basic info, however in modern cars with CANBUS systems using PWM we maybe have to rely on more advanced techniques using ammeter data loggers and oscilloscopes, but this is good starting point specially for older simpler vehicles.
@wirepuller1276 ай бұрын
If you need a molded hose to do this.NAPA auto part has one you don't have to cut,or anything.Part# NBH 10777.
@user-sm8lz4ll4r7 ай бұрын
No at the first you didn’t put That wire
@dylanwallace72518 ай бұрын
There is a really good price on one near me. Is there a place I could ask you a few questions about it?
@hypaactive55628 ай бұрын
Dude if the coil ain't plug in how will yu get spark
@jptrainor8 ай бұрын
No fair. You have a lift, and nothing is rusty.
@rachaelbreen64488 ай бұрын
Top explanation! Thank you
@rachaelbreen64488 ай бұрын
Thanks! This is gold.
@jayb.84608 ай бұрын
No help. Both my cables are not labled i need to find out what is positive before i connect the battery.
@amyz84368 ай бұрын
Great video, thanks
@selfmotivate9858 ай бұрын
This does not help any1
@Ravco998 ай бұрын
Anyone know how to switch from grams to oz ??
@FrankHurtAuto8 ай бұрын
There is a switch on left side of the machine that changes the unit.
@omfgbobsaget8 ай бұрын
using this guys terminology, lets say the calipers read something like: 2.000" inch 0.300 dollars 0.075 quarters 0.000 cents we get 2.375 inches how do you include cents into this? for instance: 2.000" inch 0.300 dollars 0.075 quarters 0.007 cents do you add the 0.007 cents onto the 0.075 quarters for 2.382 inches?
@Turbojonny59 ай бұрын
FINALLY! An useful informative video👍🏼👍🏼 got thumbs up and a subscription from me dude
@woodywoodog2589 ай бұрын
Great video, thank you
@Utoobwatchers9 ай бұрын
You don’t need an allen key you just need your air impact and it’ll spin off in half a second
@VTBCS6669 ай бұрын
So dumb
@muhammadjunaidkhan93129 ай бұрын
I NEED THIS SST
@413candiman10 ай бұрын
Part number? Or link?
@FrankHurtAuto10 ай бұрын
New updated part number is 04004-29131, name- Pipe, oil cooler kit
@MUHAMMADKHAN-pe7ez10 ай бұрын
check the continuity , if it is not negative, definitely it is +ve