Brilliant thx u just saved money. I know I sound a Scotsman. Yet the vid helps loads. Thx mate.🎉
@ebola1974Күн бұрын
Went to the Northampton venue last weekend. Total rubbish and imo waste of money
@maunoautio7759Күн бұрын
😁👍
@ktraglin2 күн бұрын
The comparison may be skewed by the fact that heat (in this case, boiling hot water) was only used for one of the tests. I wonder how effective some of the other tests might have been, if they were using boiling hot liquids.
@georgeparapadakis9 күн бұрын
Nice review of the day. I did mine in Abingdon last weekend. I drove the Ferrari 250R (a Testa-Rossa replica, beautiful car, terrible driving experience, but fun) and the Ferrari California (which was superb, so I paid for 2 extra laps from the 2 I had booked). Alas, even though the Cali did have a video camera, there was no recording on my card when I went to pay for it. Yes, it’s a long day and totally a money spinner for them but, if you are aware of the extras, it’s a nice day out. And as you said, nice selection of cars.
@andothemando969511 күн бұрын
Petrol and Rice is the best
@konquer24713 күн бұрын
Washing liquid + Bleach + hot water I would have never guessed this in a million yrs. Thanks
@ttflakes640814 күн бұрын
No way I viewed that car when it was for sale
@Biophyswiz19 күн бұрын
Rice in the drain leads to clogs. Good job cleaning the tank. Im going to try this.
@DavidBonehill19 күн бұрын
Now that underside renovation is something I need to do 👍 Job well done. Oh I like them rear spatz ... eBay specials?
@dadskillzcars19 күн бұрын
Hi, thanks for watching, yeah some fibre glass things off eBay
@paultaylor965220 күн бұрын
I remember my 07 Focus didn't look much better underneath at 3 years old and 20,000 miles, keep up the sterling work and great videos.
@dadskillzcars20 күн бұрын
Cheers Paul 🙏
@thevade676820 күн бұрын
Gotta love the pureness of this channel, you showing every little hassle, your son getting involved, it's just so raw and nice, keep up the work brother, hope your eye gets better!
@dadskillzcars20 күн бұрын
Very kind, thank you for watching 🙏
@thevade676820 күн бұрын
🎵Oh oh, we got some sort of holage going on🎵
@TheModernPeasant20 күн бұрын
Really good, I’d love to see you with a bigger project!
@mydailydriver10121 күн бұрын
Nice, you’ve kept him alive for a bit longer!
@DavidBonehill21 күн бұрын
Great video 👍
@user-oq6vj8xm6q21 күн бұрын
Do u know whats the lower bulb for and how to activate it??
@easytalker86422 күн бұрын
I thought the white vinegar was going to work as it does on rusty metal but no!
@elsenderotranquilo22 күн бұрын
Hi, mine has a black plastic thing at the left, like a led , It is connected with another wire. What is that, do you know? Thank you
@dadskillzcars22 күн бұрын
Is it a wire or is it the jet for the screen wash?
@elsenderotranquilo22 күн бұрын
@@dadskillzcars maybe you are right and It is a jet for the screen wash. It seems it has a little slot alrhough it looks like a led. Thanks!
@paultaylor965224 күн бұрын
You've made a great job of that, especially with it being a metallic and in such a prominent position matey.
@dadskillzcars24 күн бұрын
Cheers Paul thank you 🙏
@Mooney7624 күн бұрын
Just found yr channel n subbed 👍 I did not know how to change the cord on fuel cap 👍
@dadskillzcars24 күн бұрын
@@Mooney76 cheers bro, good to have you along!
@deelee3462Ай бұрын
I really appreciate how you attempted everything and recorded this process thank you.
@user-wj9ux6qh2nАй бұрын
There's a white tube to connect from the bottle to the connector
@VLC-ConstructionАй бұрын
Well, it might not have worked for the video, but I'm gladdened to see the simple clip on rail. Somehow knocked it on the knee when doing some roof light work. Thanks for putting this up.
@waynejenkins615Ай бұрын
for fibreglass panels try xsport racing
@thetbird69Ай бұрын
Thanks for the video, I was put off doing it myself as I hate working on my van and was told it's a pain but it was one of the easiest I've done. Plus I took it to a garage last time and I'm certain they charged me and didn't do it as the airbox was never opened up
@paultaylor9652Ай бұрын
Interesting video, keep them coming 😊
@craigpalmer347Ай бұрын
Get the roof lining out too pal
@craigpalmer347Ай бұрын
Sound deadening that stuff cheers for posting 🤞🏻👍👍🍻
@paultaylor9652Ай бұрын
Just imagine if you said that to your wife, or any female if they were in your shoes., love the videos matey.
@dadskillzcarsАй бұрын
😂😂 I’d be sleeping in Freddy! Cheers for watching Paul 🙏
@user-gb2gq8lb3sАй бұрын
Does the middle seat slide back a bit???It seems too close to gear console for anyone to sit comfortably..
@dadskillzcarsАй бұрын
It goes back a bit but it’s occasional use only, so it gets you out of a tight spot when you need it
@lexzenis2544Ай бұрын
Usually men name their cars female names because of their love affair with them. Nice vid anyways. enjoy.
@jackacookАй бұрын
helpful, cheers mate
@paultaylor9652Ай бұрын
Some minor improvements, but still have made a big improvement to the interior of the Civic.
@dougierangerАй бұрын
Very useful mate. Can you fit a sheet of 2.4 x 1.2m or 8ft X 4ft ply/mdf/osb in the back? Cheers.
@dadskillzcarsАй бұрын
Mines racked out and probably too short to get a sheet in, you might get it in the LWB model but would have to be in at an angle
@dougierangerАй бұрын
@@dadskillzcarsOkay, thanks for this. I appreciate you answering.
@user-oq6vj8xm6qАй бұрын
Hi after replacing fuel filter i have leak from an hose under the car do u know about it
@mikaeliby387Ай бұрын
Yep this works SO good! Better than one dares to imagine. Holds for the life of the tire.
@mikaeliby387Ай бұрын
This is super easy, but to the point that now when I try to use the winding tool, the calliper refuses to move. thought I bought the wrong direction tool, so got the other one. NO difference. The brakes were not stuck when I took it apart. But the calliper wont move. It´s a Fabia so I guess the right direction is the one in this video. But what to do if it is completely stuck? (I´m currently on the rear left... In the video it definately winds clockwise. )
@dadskillzcarsАй бұрын
Is it seized? Have u tried putting your foot on the brake pedal to pump it back out slightly? Does it move?
@mikaeliby387Ай бұрын
@@dadskillzcars I will try that! Gonna keep trying today. It should theoretically move though. The brakes "worked" as they should before removal, although the pads were down to the metal. I´ll be back :)
@mikaeliby387Ай бұрын
Tried everything. It moves a millimeter, just so the old worn out pads barely worked. But it wont turn to wind in. Tried pressing in all kinds of creative ways, forcing turn with pliers, pumping brakes, fiddling with the hand brake -both the actual handle and the arm on the caliper that the cable pulls wich moves easily. I guess I´m looking at changing the whole thing... Well at least I now have the tools and know how for next time it´s brake changing season :) Thanx for the help though. I learned stuff!
@nikazp4 күн бұрын
@@mikaeliby387How did you manage to fix this? I’m on the darn rear leaft and can’t get the stuff back, need 2-3 millimeters… did not realize it needs to turn and also in the wrong way for my tool.
@hanspettersimonsen5592Ай бұрын
Seems like they fixed the rust issue with the 2015 model, been driving bare metal for atleast 4 years, in salt and rainy coast climate.just recently i put on paint for good measure. But ive seen older models that rusted with gaping holes of rust.
@cyclone411Ай бұрын
Filled mine with gasoline and gave a it a good long shake. That got every bit of rusty and greasy residue.
@paultaylor9652Ай бұрын
Great video, very entertaining matey.
@mydailydriver101Ай бұрын
Well done you!! Improving all the time. Love an old focus
@kesslerbuslines9861Ай бұрын
I put stainless steel tumbling media and tumble it in a cement mixer
@dadskillzcarsАй бұрын
I used coconuts in a balloon
@ethangee96Ай бұрын
With the AC , The compressor wont engage if the system is low/empty on refrigerant, Mine was the same, compressor never engaged until i had it recharged
@dadskillzcarsАй бұрын
Oh ok that’s cool, it may be easier than I thought then. Cheers
@ethangee96Ай бұрын
@@dadskillzcars No worries man, Also the AC relay is common to fail, can find them cheap enough so if it still doesn't engage i'd try that next
@19EdurneАй бұрын
Useful, especially concerning the very loud beeping-for-no-reason thing, because even Peugeot garages couldn't explain why it's doing it sometimes. However, I still have a question: I have a Partner Tepee 1.6 Hdi from 2016 and there's a small black sensor-looking thing protruding from the middle stop light at the top of the tailgate and you wouldn't happen to know what it's for, by any chance? I know there's one like it on the underside of the passenger door rear view mirror for monitoring outside temperature (and BTW you better make sure, if need be, to replace your rear view mirror with one that has it, otherwise your car computer won't work and will start showing a slew of warnings - because it needs it to monitor the engine temperature and other things, so I don't think there are two of them.)
@dadskillzcarsАй бұрын
It’s the jet for the screen wash isn’t it?
@19EdurneАй бұрын
@@dadskillzcars On closer inspection, I think it is. What a stupid place to put it!
@paultaylor96522 ай бұрын
It's still got some pull, even though it's not the prettiest Civic yet.
@Hamstermist2 ай бұрын
I know that lane. Bottom of blue bell hill. Only got a KZfaqr in the area 😂
@dadskillzcars2 ай бұрын
Mr furious driving is local too!
@Hamstermist2 ай бұрын
Temporary fix is always a long term one😂
@suededogs96702 ай бұрын
I am looking to get a mini driving experience, should i go direct to these people rather than through a voucher company ?
@dadskillzcars2 ай бұрын
I guess the deciding factor is cost, I don’t honestly know which the cheaper option would be or if it works out the same. They always have offers on though