Great video. I have a question. If you loosened both tripletrees, how did the forks not slide up ( or basically the bike sliding down the forks)?

How not to do it 101

What do you mean 'bent forks' do you mean the forks out of alignment with the handlebars? Bent forks does not make sense

I will try that thanks for this video it might help me I got a 2000 to 22 brio 50cc but my force exposed as much as this video so I had to take some things off to get to them but I understand what you're saying and I'm going to try that mine was brand new too car ran me off the road I hit a curb and then they seem bent but by watching this I'm going to try this first thank you

this vid saved me bro

So after taking my front wheel off, realizing my front brake is closed and i cant open it, hammering the brake back open, putting the wheel back on, and then kicking it just to realize that's all I had to do this entire time to realign it. Thanks for making this video!

So after taking my front wheel off, realizing my front brake is closed and i cant open it, hammering the brake back open, putting the wheel back on, and then kicking it just to realize that's all I had to do this entire time to realign it. Thanks for making this video!

My new 22 is hopefully arriving in the next 2 weeks can’t wait , got other bikes this is purely a fun thing &green laneing here in the UK nice review look forward to seeing your next one when got more miles on it 🏍🎉🎉👍

Life saver

This video is greatly appreciated. Fixing a Vulcan 750 that was laid down and thought all was lost when I saw the tire pointing to the side! Loosened four bolts and hit it against my garage and it’s straight again!

I think I did this will see thanks

Did you loosen the top middle Bolt?

Do not loosen the top triple clamp bolts!

Awesome thank you. I just ate shit today and then I crashed my bike 😂 Not hard but enough to bend them. Ima try this before taking it to a shop. Thanks.

Hey I crashed my bike and one of the forks is higher then the other now can I just losen it and put it back it don’t look bent

If you’re here and have a Honda Grom, I did this method. Video on my channel.

Thank you for the video!

Thank you my 110r is saved

You just saved me a lot of money! Thanks!!!

Just dropped my DRZ in some mud. Did this and it worked. Loosened the pinch bolts, loosened the bottom triple tree bolts, and then held the front tire between my legs while i tweaked them left and right.

Still have the bike ?? How is it

It’s made to do that, so that you don’t bend your forks

Thanks bro

This might work, I’ll give it a try.. if not I just lost real bad on Craigslist😑 bought a ktm duke 390 and he said it wasn’t wrecked

Whoever actually listen to this guy is crazy 😂 you don’t smack your front spoked wheel on something I mean come on that’s common sense 😂

Thank you so much for posting this video. My son crashed with his new KLX230R while we are on a family ATV/Dirtbike vacation in the Allegheney National forest, from the look of his dirtbike, I thought the forks were bent. I was already preparing him that he may not be able to continue to ride his dirtbike. We started looking at what it would cost to replace the front forks Then we saw your video, I did exactly what you suggested, and to the surprise of myelf and my son, this fix actually worked. I was able to straighten the front wheel alignment and the forks and wheels are ok. On behalf of my family and I thank very much for helping a fellow rider.

Everybody that buys a bike like this changes the muffler. EVERYBODY.

How to do it the easy way: Loosen the pinch bolts that hold the axle in place (not the actual axle) Loosen the lower triple clamp (not the top one!) Engage the front brake and compress the suspension a couple times to get the fork realigned. Tighten all Bolts down again - Done This can even be done on the trail with only few tools

Nice GT-R in the garage, by the way.

Before posting an instructional video, get your facts right first! You do NOT loosen the top triple tree bolts - if you loosen them along with the bottom ones as you described, the fork tubes will slide up and hit your handlebars on a bike like yours - there is nothing to hold the fork tubes in place at that point! Also, you do NOT (whack) a spoked wheel, unless you plan on readjusting the spokes to make the wheel run true again, this depends of course on how hard you (whack) it and it really doesn't take much to knock a wheel out! There are plenty of videos on here that show you the correct way to guide you through this process.

Trying that tonight. Thanks brother

Great video as I’m looking at trading in a Husky Terra.

Ugly exhaust and ridiculous dashboard but really a great bike ! You're absolutely right about the TKC80, they are as perfect on dry roads as horrible on wet or icy road. I did fell 2 times with my first 690 Enduro. Now i have Heidenau K60 Scout M+S on my '15 Enduro-R and i' m very happy with them, on every surfaces

was the t-fork bend ? my bike also fell the same way you showed. handle bar was badly bend so i replaced them with a new one. but my suspension hardened. now am getting vibrations on the console and handle bar. a mechanic said my t-fork is twisted. so.. was the t-fork of your bike bend ?

Do the bike have fuel light ? Does it shows you when the tank is empty?

Thank you hope it works on my cbr 600rr

Mate, u save me for a fee hundred buck. Tks !! Now my fork are aligned with my handlebar.

Should I tighten the bolts after straightening it?

Thanks man. Imma go give it a shot. Cousin told me it might be bent but he didn’t know. Definitely trying this before buying

THANKS

Only ascetics and road rider comments, ....what about off road capabilities?, particularly the suitability of its first gear ratio for slow off road riding....I believe this is an issue?

Skip to 2:00. You’re welcome.

Exhaust is disgusting like🤢

I see a 701, i sub ,🤭

😎🤘💯

Thanks for the video it helped alot

Is the Husqvarna 701s reliable?

Ruben, welcome to the Husky 701 family. I live in Raleigh and get out and ride wherever and whenever possible. Shoot me a message and perhaps we can do some riding in the Carolinas sometime.

Salvage hunk of junk...