545RFE what tips do you have?

can you use the valve body for a 96 - 06 in a 93 with a 93 Seperator plate?

The upgraded clutch pack is nice but you skipped the actual fix.

My 700R4 doesn't have that port.

I need to know how to contact you. I have subscribed but I found nothing about where you are located or a business number.

I had that happen in a 4L60E just going from reverse to drive in my driveway.

That contradicted itself. If it happened again it’s Just gonna burn the pack again. No matter how tough it was.

Do you have any info on the 700R4.

Is that from a 98 gm?

I know this video is 10yrs old, but would this kit and bracket work on a 2 bbl Carb? Like a 2150 carb?

It's not free shipping and handling now.

Hell yeah,, thanks,,i just won a bet ,, you couldn't have explained it any better than that

My e40d just blew up after I rebuilt it 😂 4th clutch brunt out. Trans shop said I might have put the overdrive band in backwards or something failed. Idk how that's possible but it happened.

Thankyou Cheers😊

Vigo. 4speed.

I am thinking ANY clutch pack starved of fluid is toast.

I got an 86 fiero thats not shifting until high rpm even if your light on the throttle

Monster should talk about their auto theme park "lead foot city" in Brooksville, fla., pretty cool bar with drag and burn tracks !!!

2003 mustang. How many quarts do you put into the tq converter?

See with the 4l60E that came in a lot of GM trucks it's the seals that give out and roasts the clutch packs. Had to replace a few transmissions before

Why dont they just do this in the firat place from factory....have we really made american goods subpar for profit now....

Also its a 4l60, do urself a favor and get a 4l80 and a good wiring harness the hard shift will dissapear

Do you have a lockup kit for a 4l60 none E ? It has 4th gear port but only one wire pigtail on the other side.

What do you get for a bullet-proofed 4L60E for 4WD?

Will a E4od converter work on the 4r100 on a 7.3 idi

Hi, I have a 95 suburban 4x4, I put a 99 4x4 trans in it. It runs but it doesn’t get out of 1st gear. What can I do?

Got a question on the 4r100 4X4 trans. Mine has two sensors 1 top/front (input shaft/turbine speed sensor) and 1 top/rear (output shaft/ output speed sensor). Are they both the same or is one shorter (insert magnetized plug) and the part number/numbers ?

How does this relate the 89, 90 and 91% torque converters? What is the percentage in relation to? Thanks,

thanks , do you know what is the way to bypass 5 pin switch?

will a early model 4l80 fit a 03 6.0?

will it unlock by its self as i down shift

You solved part of the mystery. I would have liked to see more detail on the hydraulic circuit and how it applied the pressure to force the clutch plate against the case. Thanks for the vid.

Excellent explanation 👍👆

i have a 700r4 in my 55 chevy, and its not shifting into overdrive around 45-60mph by it self unless i manually do it. would that be a bad adjust to the TV cable?

I bought the SS kit for the 4L60E kit. Its good for 650 hp and 600Ft/lbs of torque. 427 SBC in front of it in a S10!

Luv watching this channel ❤️

Never in my life I ever saw convertible Mach 1 ever. I’ve seen convertible mustangs, but not Mach 1 and I’ve had a 69, 70, and 72

How long keep in

Your 6L80E has fluid in Transmission in ship ,to me

Does the little hole use a plug? At the bottom

When people bitch about the price at a mechanic shop. Videos like these should be showed...

Do yall have a rebuild video? The Vimeo link doesn’t work

What if the cover doesn't pop off quick? Ive been under my vehicle for about 7 hours now just trying to get the cover off via hammer and chisel.

There's no way I could do this myself my 97 gmc doesn't have the 3/4 gears and need a rebuild but after this video I think a different Transmission is needed .any help would be appreciated

Makes my head hurt if I would have to figure out how to put it back together.

The only R&R I know about is rest and recovery so I’m good

I have a 2001 4r70W and wanted to put a 2003 4r70W but the tail cone is a 41W and the other is a 42W and does not fit. What is the difference?

Sad things I got a less abused trans cause the one I had will only drive in first or second but after doing a fluid change, I notice it was burnt to hell and had metal in the pan. So the one I have in now won’t shift into gear at all. Luckily park works lol

Ive got the 5.3 liter upgrade (300-05253E) for my 2002 GMC Sonoma 4.3L SLS. Does every model only have 1 transmission or different gears ratios for a heavy duty towing option?

Why did reverse go out and what is required to fix it?