Ray's Toolbox

Пікірлер

@lourdesmartins3060 6 күн бұрын

Show🇧🇷🇧🇷🇧🇷🇧🇷

@user-jq5jl7lo2n Ай бұрын

Nice to know you this information 😮

@smitchell22 Ай бұрын

You did an amazing job, thank you!

@raystoolbox Ай бұрын

@@smitchell22 thanks, glad you enjoyed it.

@AngieWilliamsDesigns Ай бұрын

Thank you for sharing this.

@k9insomniac783 2 ай бұрын

I started turning a year or so ago on a mini harbor freight lathe. Despite some of the reviews, I found it to be just like any other tool. If you respect it, do the proper maintenance, and don’t try to treat it like it stole something from you, it has worked flawlessly. I’m now in the process of upgrading to a full size lathe which most I’ve looked at are in the $3000 range. I’ve been curious about the grizzly lathes. I know many people who use their joiners and planers and love them. You’ve given me something to think about. If the company cares enough to recall certain pieces of their machinery for customer safety, that says something.

@raystoolbox 2 ай бұрын

I agree. I was pleasantly surprised myself. It did take a few months for the new pieces to arrive. However they did let me know that upfront as they were made overseas. I have bought from them in the past and will buy from them again. Thanks for taking the time to comment.

@cellarrat4178 2 ай бұрын

Great video.

@raystoolbox 2 ай бұрын

Always good to hear. I’m glad you like. Thanks for the comment.

@cathybenson5119 2 ай бұрын

They are beautiful. 👏👏👍👍🇦🇺🇦🇺

@raystoolbox 2 ай бұрын

Thank you. It’s always good to hear. :-)

@user-uq2lh4rd9g 3 ай бұрын

You like chemicals in ur food,there's gone be constant moisture,on the bottom of that lid,& you got all sorts of chemicals,stain,clear coat,what else,

@raystoolbox 3 ай бұрын

Not for food. Mostly for looks. We have it sitting in the living room. I keep my BP cuff and scope in it.

@FasterthanSpeed414 3 ай бұрын

Igniter def was popping my outlets. Now to get the new one in

@raystoolbox 3 ай бұрын

Hope I helped some. Good luck and thanks for the reply. 😊

@rarecraftsman 3 ай бұрын

Nice little project right up my alley! Great Job man.

@raystoolbox 3 ай бұрын

Thanks for the reply. Glad you like it.

@DeepInfernoRising 4 ай бұрын

Great video Ray! Will need to do this soon! God bless

@raystoolbox 4 ай бұрын

Thank you :-)

@gerardoespinoza7202 4 ай бұрын

I had the same saw with the Ridgid brand for over 10 years, I had build many kitchen cabinets and the saw still going, the saw it’s not perfect but it does the job. I have a out fit table and a left side table and help a lot cutting big panels.

@raystoolbox 4 ай бұрын

I like that idea. I can see making an outfeed table for this.

@user-jq5jl7lo2n 4 ай бұрын

Good Job

@raystoolbox 4 ай бұрын

Thanks

@ImThatAlien 4 ай бұрын

What brand are those stains? my father seen this video and is looking for them!

@raystoolbox 4 ай бұрын

For the most part I use Minwax. I like the capillary properties of that brand. Hope he enjoys making these. I do. Thanks :- )

@davehoover8214 4 ай бұрын

Awesome!!!

@maplebones 4 ай бұрын

Thanks. Now I know how to open a box.

@user-oj6oe9tu2i 4 ай бұрын

How can i gat the machine

@raystoolbox 4 ай бұрын

I ordered it directly from grizzly.

@hosejockey14 5 ай бұрын

I like it. Another fun project.

@raystoolbox 5 ай бұрын

Thanks.

@jdkemsley7628 5 ай бұрын

I just finished putting together the same saw, but I can't loosen the arbor flange nut for the life of me! Have you been able to change blades yet?

@raystoolbox 5 ай бұрын

I haven’t tried to change blades as of yet. I plan to in a few months.

@TheManFromSnowyRiver 5 ай бұрын

Nice job Ray! Looks great, keep it up

@raystoolbox 5 ай бұрын

Thanks, will do!

@chriszbodula1894 5 ай бұрын

Very poor explanation of mixing colors. One is left to “assume” you used spray paint sprayed into a cup with epoxy (if yes, what color epoxy) then poured it on the table top. Common, you can do better than this!!!

@raystoolbox 5 ай бұрын

Thanks for bringing that to my attention. I'm still learning & not sure how to edit this. I added a text comment to help explain.

@BarnQuiltAdventures 5 ай бұрын

Bravo. Nicely done. Definitely a unique approach to a barn quilt. Love the 3D effect.

@raystoolbox 5 ай бұрын

Thank you

@wardnb 5 ай бұрын

This saw looks identical to the maksiwa sc.1000.i, but this one have a lower HP rating. It's 800 at Menards, which is a fair but cheaper and free ship to store. Curious for the saw is working out for you.

@raystoolbox 5 ай бұрын

It is a huge upgrade for me. The only glitch I had was I needed to get a 12 gauge extension cord for it to work. The smaller cords had too much draw on start up. After calling the company and upgrading to a 12 gauge extension cord it works great. I have ripped 12’ boards and cut 3/4” sheet goods so far. No problem.

@clballs1 3 ай бұрын

How do you like your maksiwa? If i may ask, Cant seem to find many reviews on it by people that have used it more then 5 minutes

@raystoolbox 3 ай бұрын

Really like it 😊

@cathybenson5119 5 ай бұрын

Very nice. New subscriber. 😊😊🇦🇺🇦🇺

@raystoolbox 5 ай бұрын

Thanks

@charliedavis6143 6 ай бұрын

Looks exactly like a ridgid table saw

@raystoolbox 5 ай бұрын

It may be made by the same company. I don't know. It does work very well for me. Thanks.

@raystoolbox 6 ай бұрын

This countertop was made with epoxy from StonecoatCountertops.com. Check them out.

@jameswalsh5023 6 ай бұрын

That's a lot of wobble when you crank the adjustment wheels.

@raystoolbox 6 ай бұрын

I noticed that when I looked back on the video. Then I realized it was sitting on the wheels and not the floor. No wobble when it’s solid on the floor. I tried to make a note about that in that section. Live and learn. Thanks for your input. Subscribe if you haven’t yet and I’ll try to do better :-)

@cirocerciello630 6 ай бұрын

'Dove si compra?

@raystoolbox 6 ай бұрын

I ordered it from Menards.

@blindluck5734 6 ай бұрын

your sound quality on your voice is so bad that the music you were added just interferes with the voice more. Having a hard time hearing it all. 0:40

@raystoolbox 6 ай бұрын

Thanks. I’ll check it out.

@mtsaz100 6 ай бұрын

I use amana blades---not thin kerf. I use amana dados. Razor sharp. this saw does not have the power to cut hardwood dados or reliably cut hardwood without burning it. Its way underpowered. Its a contractor saw---made for plywood and 2x4s, obc, and building a house.

@mtsaz100 6 ай бұрын

These were made by steel city in china, rebadged rikon, craftsman, mastercraft, and ridgid. I wish you had shown the trunnion adjustment. I have the sears version and have for 10 years. I threw away the garbage fence and got a vega---which can be transferred to any table saw--best investment I made. Now the blade/slot is not in line, and if I can't adjust it- to the trash it will go. I paid 400$ for it- you get what you pay for---I could have got a granite table cabinet saw from sears at the time for 799$ but it was super heavy and I had no way to get it home. I should have found a way. These saws are NOT for fine cabinet making. You can do "OK" but these are not super accurate precise table saws. I dont care if you use 250$ blades, change the fence, get rid of the toy mitre gauge and get an incra (I recommend) they still are not 100% precise. They are fair at best.

@williamjoiner7330 7 ай бұрын

Awesome work!!! I love mine!! Thx

@raystoolbox 7 ай бұрын

Glad you like it!

@hosejockey14 7 ай бұрын

Another nice job. Thanks, Ray.

@raystoolbox 7 ай бұрын

Glad to hear. Thanks

@jonathan2585 7 ай бұрын

I had that same saw for 3 years and ended up hating the saw for a lot of reasons and bought a harvey cabinet saw

@raystoolbox 7 ай бұрын

Hopefully any glitches have been worked out by now. 👍

@jonathan2585 7 ай бұрын

@raystoolbox I'm giving the saw away to a friend at work.. but I hope the saw works wonders for you and all your projects pay very close to the fence the 2 set screws on the front to square up the fence to the miter slot kept loosening which would put the fence out of square which can be dangerous it's just a friendly warning if you can find a good solution to keep the screw from moving but not freezing them from adjustment let me know cause I tried everything nothing seemed to work

@raystoolbox 7 ай бұрын

Thanks for the info

@MsLorisM 7 ай бұрын

What an amazing idea! Even though the pieces are cut identical, the placement of the colors make each one unique! Well done!

@raystoolbox 7 ай бұрын

Thank you so much! I appreciate your time to comment.

@adgieem1 7 ай бұрын

You showed the wheels , but never demonstrated them working to show the saws mobility. That is of huge importance to me.

@raystoolbox 7 ай бұрын

Sorry about that. The wheels pick the saw up and it rolls easily. I did show moving the saw some. I did not show actually using the pedal. When you pick the wheels back up to set the saw back down it seems to "drop" the saw back to the floor. You can see that in the video. Not a big deal, but it does sound bad.

@miguelrodriguez7117 7 ай бұрын

Anything else your unhappy with Mr. Karen

@freeradical6390 7 ай бұрын

Almost identical to my Rigid. I found that the aluminium Bocsh router table bolts right on to the right end of the table saw, extending the table out to the end of the fence bars perfectly. Saw works great single blade but doesnt like big dados, needs a 3-5hp motor.

@raystoolbox 7 ай бұрын

Thats good to know, Thanks. A dado set up is in my future.

@stevesiefken6432 7 ай бұрын

I’ve heard that table saw was built by Ridgid, but private labeled for Rikon. Is that right? How do you like it?

@raystoolbox 7 ай бұрын

All the paperwork has Rikon on it. Is it made by someone else? I don’t know. Not unusual these days. I have upgraded from a $150 table saw so anything will seem better. That being said, I like it! The saw is heavy, sturdy and solid. I haven’t had a lot of time to use it yet. It was easy to assemble and everything was in adjustment. It has a large top for sheet goods. I feel like this will be the only table saw I will ever need. Thanks for your interest. If you haven’t subscribed go for it. I have a dust collector to assemble next :-)

@stevesiefken6432 7 ай бұрын

@@raystoolbox I agree it looks like a very nice table saw. Good luck with it and hope you enjoy it for a long time!!👍🏻✅

@su-mu 7 ай бұрын

8:16

@Lee.M.Easton 8 ай бұрын

Those are awesome, great work and great idea. Thank you for sharing.

@raystoolbox 8 ай бұрын

Glad you like them!

@tashbirthmark4221 9 ай бұрын

What did you use for the wood?

@raystoolbox 9 ай бұрын

You may have missed it in the video. I used 3/8” plywood for the back. I used plaster lathe for the decorative pieces on the front. I ripped 1” wood to 3/4” strips to make the frame. Thanks for your interest. I really appreciate it. ❤

@user-jq5jl7lo2n 9 ай бұрын

Nice decorations

@alfie3141 9 ай бұрын

Love it

@hosejockey14 10 ай бұрын

Looks nice. Good video

@raystoolbox 10 ай бұрын

Thanks 👍

@larryshort1851 11 ай бұрын

looking good, its going to be a great camper

@raystoolbox 11 ай бұрын

Thanks. I appreciate that.

@larryshort1851 Жыл бұрын

looking great,

@raystoolbox Жыл бұрын

Thanks. Baby steps :- )

@larryshort1851 Жыл бұрын

looks great

@raystoolbox Жыл бұрын

Thanks

@atengkalengkaleng6291 Жыл бұрын

Greetings from the Atengkalengkaleng channel

@ronbaker1280 Жыл бұрын

Very good project! Thank you. RB - Highland, Indiana

@user-jq5jl7lo2n Жыл бұрын

Interesting

Ең жақсы KZfaq

Пікірлер