Ай бұрын
2 ай бұрын
Пікірлер
@mach51 Ай бұрын
so glad I did not have to watch him take it out of a box in addition to spending all that time putting drawer liners in...
@dwproductions411 23 күн бұрын
@@mach51 😂
@ryank588 Ай бұрын
Any tips on replacing the serpentine belt?
@mattrandall9577 Ай бұрын
10 days ago so you probably already did it...but I just went through this trying to diagnose a squeak and even with the diagram(I still think the one in the manual is wrong) it was a pain. Biggest tips 1. take good pictures of how it's routed. That will be much easier to reference. 2. When in doubt the flat side of the belt goes against the non ribbed pulleys. Just knowing that and working the belt on so all that matched up was easier. I started the belt on the left side as you are looking down into the engine bay on the alternator and then worked to the right. I used one of those auto plastic clip removal tools to give me the reach needed to push the belt on the rest of the way on the right side while loosening the auto tensioner.
@dgv1170 Ай бұрын
Are you concerned about direct connection to an RV system such as a previous awning light that has 12 V wires going to it my question is more based on the fact that the voltage may not be regulated and might get up to 14 V when charging. Wouldn’t that damage those LED lights or do you think the 12 V wires already in the RV or somehow regulated by the battery or converter system?
@nobodymporta Ай бұрын
Thank you ... sir
@dwproductions411 Ай бұрын
You’re welcome 😀
@grahammaddison7482 9 күн бұрын
@@dwproductions411 what WiFi have you got connected to d7 is it of a phone hotspot thanks
@goldwing2000 2 ай бұрын
Will the D7 program transponder keys without an additional add-on device?
@petescustomcarshop 2 ай бұрын
Pretty cool, I'm surprised you were able to drill through it so easily. So what did you use a 7/16 so much for?
@irwindrew 2 ай бұрын
I originally was thinking butcher block top like you it surprising how easy it scratches howerever a little wd40 or stainless cleaner on it and it shines so much you can’t see the scratches
@heliwrecker8649 3 ай бұрын
Any idea how many cfm it uses?
@gra6276 3 ай бұрын
This is the video that I have been searching for... thank you!
@miguelfernandez2325 3 ай бұрын
Ok well those are not key fobs they are remote controls. Your video title "How to program key fobs for lost keys" is wrong. It should say how to program a remote control. You didn't program any keys to the car. LMAO
@MasterTechLou 2 ай бұрын
We call them fobs, be nice. He is still helping someone out there that needs help.
@miguelfernandez2325 2 ай бұрын
@@MasterTechLou They're not fobs. If you want to help others than do it right call it what it is, all it takes is a little research. I'm not being rude or not nice, I'm calling it what it is, which is helping others.
@goldwing2000 2 ай бұрын
"Remote control" and "key fob" are literally the same thing. He didn't say anything about programming the keys themselves.
@miguelfernandez2325 2 ай бұрын
@@goldwing2000 LOL no they're are not the same thing. The video title "XTOOL D7: How To Program A New Key Fob For Lost Keys" says he did.
@UNDEADGAMING210 2 ай бұрын
Dam you took this title personal lol
@danfaerber8764 3 ай бұрын
Thank you so much for the video. I’m trying to decide between two different models and that the X7S is what I’ve think I’m gonna invest in you just help me make a little little bit. More educated decision. Thank you so much for your videos. Cheers, brother.
@juselinoamorim8401 4 ай бұрын
Very good my brother I love from Brazil congratulations
@wforty94 4 ай бұрын
very nice tool box, thanks for showing us how you configured it. is still box still available or has it been discontinued? i see it on the Home Depot website but you can't actually buy it as it says its unavailable. how would one go about acquiring it? go to HD and ask to special order it? thanks!
@dwproductions411 Ай бұрын
Yes and yes lol
@karencompton8809 4 ай бұрын
Watch video 3x not seeing anything regarding water pump. What to see were the water pump is on a 2017 titan xd deisel
@jameskirby9369 4 ай бұрын
What if u have push button start do u just put the vehicle in the “on” position?
@Supra_Mickey 4 ай бұрын
Can you move the big drawer with the two top small ones?
@starbai3619 5 ай бұрын
Did you ever replace the top with butcher block from HD? If so could you post a link to which one you used?
@dwproductions411 5 ай бұрын
ive not gotten to that point yet, actually read the warranty and didnt want to void the warranty by drilling holes on the bench top
@dereklivingston6951 5 ай бұрын
Thanks for the video. Where did you have the keys cut?
@matthewsimmons7795 6 ай бұрын
Even snap-on stainless steel top srachs too
@dwproductions411 6 ай бұрын
Very true
@crossbow3539 6 ай бұрын
Looks really good the only change would be the socket drawer really needs to be on top
@crossbow3539 6 ай бұрын
Saw more of you than the tool box😢
@lesglover6515 6 ай бұрын
My buddy Jivetone Joby J NEEDS this box !!!!!!!!
@dwproductions411 23 күн бұрын
@@lesglover6515 your buddy definitely needs this box 😂
@HYDROMAXplus 6 ай бұрын
Needs two deep wide double slides. Those 1" are not very useful
@hoodedgood 6 ай бұрын
Downside it only supports 3000 lbs according to their website and only has a 5 year warranty.
@mn4a15 7 ай бұрын
Dude, you already filled it. That’s such a big box.
@alexmoran2460 7 ай бұрын
Great video.👍🏼
@dwproductions411 23 күн бұрын
@@alexmoran2460 thank you
@darrylt5300 7 ай бұрын
How thick is the top?
@EzTechJoe 7 ай бұрын
That box has a TON of space for tools. I like it !
@dwproductions411 7 ай бұрын
I think it’s a great toolbox for sure 😃
@BADD400 7 ай бұрын
Awesome Toolbox
@dwproductions411 7 ай бұрын
Thanks. It’s working great
@dwproductions411 7 ай бұрын
😃😃😃
@SigXman 8 ай бұрын
I just want a top that I can smack crap on it and bang everything on it without breaking.
@richb2124 8 ай бұрын
Thanks for the awesome video! I’m considering getting one. Love the content! Just subscribed.
@dwproductions411 8 ай бұрын
Im excited for you. Thanks for the subscribe 😃
@brucemcginnis6141 8 ай бұрын
Does the big socket drawer have reinforced ribbing on the underside of the drawer?
@dwproductions411 8 ай бұрын
There’s nothing reinforced in the under side…but the drawers are heavy duty construction..with double sided casters 😃
@duvall408w 8 ай бұрын
Can you measure the actual drawer length? I no it says 24 but not sure if thats the overall length or actual drawer length thanks
@Snowmannorth 8 ай бұрын
They’re all 22” deep per the HD website product page.
@therealmillerman 8 ай бұрын
I have the 72 inch Husky and it drives me crazy with how shallow the drawers are. So much so, I sold it to my son-in-law and ordered the 72 inch US General. I mean, it's a nice box but the drawers just aren't deep enough.
@dwproductions411 8 ай бұрын
Awesome 😃
@Snowmannorth 8 ай бұрын
I totally agree! I have the 72” 20 drawer…what was Husky thinking???
@Snowmannorth 8 ай бұрын
Me too. Oh, to do it all over again!
@80SWoods 2 ай бұрын
I assume it’s a compromise since most of these will be used in home garages where space is at a premium without interfering with parking a car. My old Craftsman I’ve used for about 25 years only has 16” deep drawers.
@brucemcginnis6141 8 ай бұрын
Thanks for the video. Ive been on the fence for 3 months with this box vs US general 72. This one was out of stock the last 2 months. Those short height drawers have me scared off. If my wrenches,pliers and screw driver's can lay flat in thos short wide drawers then im good with it.
@dwproductions411 8 ай бұрын
yep! good luck. this toolbox been great 😃
@brucemcginnis6141 8 ай бұрын
@@dwproductions411thank you for checking and for the review. I think I'm gonna to go with US general tho. More useful drawer heights, better price on sale for black Friday, way better customer service and warranty. This is a nice box for sure tho. It's tempting.if they had it for under $1500 delivered I would probably go for it.
@christurner5473 7 ай бұрын
I have the us general tool box with the top and side lockers, I absolutely love it. This is a nice box but the thin drawers suck and the metal on the husky isn’t as sturdy as on the us general
@ericrivera219 9 ай бұрын
That low temperature thermostat is gunna give your problems the truck will send more fuel to get to desired temperature the OEM is set to the proper temperature
@dwproductions411 9 ай бұрын
Thanks for the tip 😃
@2000xtreme 9 ай бұрын
Finally a video on this box. Ive had my eyes on it for a while now. I have a snap on classic 73x24. But I think this would be so much better just for the simple facts of more space and the stainless top. Yes i could buy a stainless top for my snap on box but im sure it’s probably more expensive than the whole husky box. The price point is just a bonus. I know plenty of people in the automotive repair industry that own husky boxes and they all says they are great.
@dwproductions411 9 ай бұрын
Hope you enjoy it!
@ja-bv3lq 6 ай бұрын
I've bought 3 Husky boxes over the last 25 years. The 42" roll cab and top box I bought 25 years ago (USA made) was fantastic. The 42" roll cab / workbench I bought 10-ish years ago... "USA Assembled" was OK. What is "Husky" now is garbage! Save your money and buy a Harbor Freight US General or ICON (the modern Husky is made in China like the rest of them).
@ricardo18sm 9 ай бұрын
How long was just the fan clutch swap?
@alessandropieri6036 11 ай бұрын
Hey, thanks for video! I'm wondering if you knew if you have to use the extension rod? I'd like to install this product a similar way that you did but would want it to not be so tall, as it would be mounted to the top of my van roof. Is there a way that the antenna would be able to connect directly to the coupler for the wire to come out, then to the spring/mount? Thanks
@Gta2O13 Жыл бұрын
Midland is 💩