Hi keith/mark, i may be able to source some carb filter inlets if you cant get the original ones back.
@recreativesigns45712 сағат бұрын
Blimey the underneath looks as awesome as the rest of the car. Engine bay is a work of art and a lot of man hours.
@pda491844 сағат бұрын
Excellent progress Mark.. When I stopped restoring Mini's I sold off a load of spares like the carb elbows and two original twin carb filter boxes, plus half a dozen hydrolastic units, Original Mk lll heater, two reconditioned servos with brackets, callipers and disks etc, etc.. That servo hose does look a bit on the short side .. I can remember a number of times I wished I had an extra two inches. 😅..
@philtucker1224Сағат бұрын
Excellent, they should be really handy then..
@mcmotors1004 сағат бұрын
I started mine up yesterday, first time in 7 years (where does the time go). Blimey I thought I had bad luck, I HATE new parts, I keep ordering them, and they’re wrong/different (size, quality, colour). At least we’re both nearly there. I’m never doing a nut and bolt restore again, I’ll just do restores where it’s nice, but not like new. Stay strong, nearly there 👍 (can that vacuum pipe go above the brake line?)
@philtucker1224Сағат бұрын
Why on earth do you still have it if unused for 7 years??
@mcmotors1004 сағат бұрын
I started mine up yesterday, first time in 7 years (where does the time go). Blimey I thought I had bad luck, I HATE new parts, I keep ordering them, and they’re wrong/different (size, quality, colour). At least we’re both nearly there. I’m never doing a nut and bolt restore again, I’ll just do restores where it’s nice, but not like new. Stay strong, nearly there 👍 (can that vacuum pipe go above the brake line?)
@peterdraper95954 сағат бұрын
Great job mark I know the problems you have had over the weeks hopefully you have now sorted it great video Keith
@gsxrpat61474 сағат бұрын
Looking minty!
@dnf19035 сағат бұрын
Hiya Mark-just looks brilliant. Twin SU carbs really make it! Look forward to hearing it firing up for the first time. Keep well.
@peterdemetriou22635 сағат бұрын
Looks very nice indeed 👍 will you be getting the engine back soon ?
@josephberrie95509 сағат бұрын
the heel board is a disaster even when its good..what clown thought this fabrication on the mini was a good piece of engineering and they have had fifty years to sort it out and havnt..dogs breakfast of a design
@philkitson3563Күн бұрын
Hi Keith, coming along bundles now, keep up the good work, have you got somewhere I can private message you please mate, cheers Phil
wheels are amazing. would love a set of these. I think these were fitted to the 1989 Racing Green in the famous Autocar roadtest
@classicminiworkshopКүн бұрын
Yes they were
@edwardfothergill6156Күн бұрын
Well done young man! I wonder how long it took to connect the manifolds? Mine are 1 1/4” on a 998 so, you may have more room but mine took me ages!!!!
@peterdraper9595Күн бұрын
Looking good Keith almost there great video
@peterobrien35392 күн бұрын
She looks great Keith. I had the same issue with my front grill, to get it in right position the grill was 5mm too high. It closed OK, so I didn’t grind it down.
@richrowley83552 күн бұрын
So neat. Good work mate
@surfblue632 күн бұрын
To align the bonnet trim on the purple car remove the trim and put some spacers/washers in to get the alignment right. I've used rubber o-rings in the past as spacers.
@classicminiworkshopКүн бұрын
Good tip!
@Chillibeard2 күн бұрын
Thanks for showing the rivnuts at the end, I've never used them before. I'll have to invest for my grille - it's terribly aligned and you've made me self conscious now.
@classicminiworkshopКүн бұрын
No problem 👍
@edwardfothergill61562 күн бұрын
Re-use and recycling on a not-for-profit u-tube company. Bound to be a tax dodge there somewhere?
@luchelmer31462 күн бұрын
Hello Kieth, This Mini is a Masterpiece ! I've noticed the rearlights have a chrome rim, your indicator lenses on the front, doesn't have this. Of course it is personal taste, but there are lenses, with a chrome rim, might look beter, I think. Best of luck, with building this absolute gem !
@rob_lightbody2 күн бұрын
Love your latest video, car looks stunning. You may have mentioned previously, but do you know what make and size the wheels are please? I have a 90 Cooper and would like the same! My mum bought a Racing Green in 1989 and I remember seeing them at the Rover dealers. Everyone used to stop us to ask about it. It was such an exciting time for the mini, the big comeback, people don't realise the impact it had then (including the conversion kit). People that knew them from the 60s were still around to talk about them, the white roof was back!
@classicminiworkshopКүн бұрын
Theu are 12” Mistral Mod wheels. Very rare nowadays
@rob_lightbodyКүн бұрын
@@classicminiworkshop thanks! That seems to be what John cooper garages used, especially before the Rover minilight was made. They fit the arches better than the rover ones.
@scottsuter34512 күн бұрын
Looks fantastic. May I suggest a longer hose for the pressure washer which saves you having to move the machine. Also a high speed blower to chase out water from nooks and crannies. When is the engine coming back?
@bebobism2 күн бұрын
I always put lock tite on rivnuts to prevent them spinning around in the future when the stainless screws have corroded the aluminium , that's a right pita. 😏
@9567kill2 күн бұрын
Looking really good now! Waiting for the racing green decals to go on. Any self tapping screws on my mini I replace with rivnuts now, even did the sun visors 😂
@mcmotors1002 күн бұрын
You do make things look easy 👏 what size rivnuts did you use? Cheers 👍
@deangaryjames3 күн бұрын
Top tip * i always spray rivnuts with cavity wax to guard against the dreaded rust. Also i spray the back of the grill with wax. Nice job looks great 👍
@velmathemini3 күн бұрын
Just out of curiosity, will you rivnut the bonnet trim? You find the bonnets tend to rust around that area with the screws. I'm not sure if there's enough space for rivnuts though? Looks really nice with the rivnuts in. I've tried my grille on & it fits awful, hope I can get it fitting as good as yours 👍. Looks spot on the front 👌.
@mlmoke3 күн бұрын
does the Racing Green have a strike plate for the bonnet safety catch hook? I like the way on my Japanese SPI mini there is a little plate that sits on the lip, so the hook hits that rather than the body. I guess PIIIOW would have it too?
@classicminiworkshopКүн бұрын
No striker plate
@mlmoke23 сағат бұрын
@@classicminiworkshop Will that make you lose sleep now? 🤣
@GPH24743 күн бұрын
Bit sceptical that you are in a different dimension, seems always sunny lately in the vids, i know its summer but you wouldn't think so in sw london.
@classicminiworkshopКүн бұрын
Think Ive been very lucky!
@dnf19033 күн бұрын
Hiya Keith-looks brilliant that grille. Changed Bruce's for a black one. Just need an engine to put under that bonnet now! Keep well.
@recreativesigns45713 күн бұрын
Love the paintwork Keith. Complimented by the new grille.
@paulrobinson35283 күн бұрын
Sorry but i have cheated on you Keith 😅
@classicminiworkshop3 күн бұрын
Again! You sl@g 🤣
@paulrobinson35283 күн бұрын
@classicminiworkshop 😆 I'm cheating on you again on Tuesday. I'm with Matt from "Furious Driving" doing a garage barn find with my late Uncles F Reg White MG Maestro 2.0i with 9000miles on the clock!!! Been garaged since 1995. What were you doing in 95?
@MrSpoonYT3 күн бұрын
Really fantastic work Keith, love watching your work on a Sunday nights in bed as I get up at 2.00am many thanks joe
@tbex95805 күн бұрын
Hi Keith, what air cap is did you use on the devilbiss? Looking to invest in one with a TE110 cap. Thanks.
@classicminiworkshop3 күн бұрын
Mine has a TE20 air cap. I couldn't say which is the best one to use, I don't understand it enough.
@grahamwoodier50665 күн бұрын
Where did you get a few hours of sunshine from to dry your carpets? I am still waiting for some of this to clean and refurb my seats.
@classicminiworkshop5 күн бұрын
I got lucky for a few hours, i think that might have been summer gone now lol 😂
@gsdavies1006 күн бұрын
If John Cooper had P 111OWW as a demonstrator, I've driven it as I was considering doing a Sport 5 conversion on my SPi. Was a lot of fun!
@hichamfandouch7 күн бұрын
Slm
@andybarbet737 күн бұрын
Looking really nice, can i ask what sort of paint you used ? I will be respraying my TR7 once i've recommisoned our 1976 Mini 1000. Also, what DA did you buy ? Thanks 👍
@classicminiworkshop6 күн бұрын
Polyester base and 2k clearcoat. The DA was called Magnum i think, just a cheap 150mm DA off ebay
@andybarbet736 күн бұрын
Great, thanks for the info, I'll start doing some research 👍 👍
@mdratulakonda17 күн бұрын
Hi dear!!! Hope you are well. You already have 14.3k subscribers a huge number. Your video-making is very good. Your content ideas are excellent. But I am researching your channel and was shocked to see that your every video has lower audience engagement and reach also much lower. If you permit me, I will share some information to increase your channel. Then you get lots of subs, views, and a larger audience reach organically daily. Waiting for your valuable response, Thank you.
@peterdraper95958 күн бұрын
Looking good Keith light at the end of the tunnel great video
@philtucker12248 күн бұрын
Wow Keith I didn’t realise how beautiful those wood cappings were! Gorgeous mate! 👍🇬🇧
@classicminiworkshop8 күн бұрын
Thanks 👍
@philtucker12248 күн бұрын
Wow Keith I didn’t realise how beautiful those wood cappings were! Gorgeous mate! 👍🇬🇧
@markdraper79 күн бұрын
Well, i never thought about doing the regulators like that! I've been doing it the hard way every time 🙄 New fitting mode unlocked 😂 Cheers
@hichamfandouch9 күн бұрын
Cv
@hichamfandouch9 күн бұрын
Slm
@FastTrack-110 күн бұрын
You did'nt mention about the winder mechanism sealant Keith. I've been looking where to get this from....if you don't mind where did you get it from ?
@classicminiworkshop7 күн бұрын
Its Butyl tape www.psasolutions.uk.com/product/butyl-sealant-tape
@dnf190310 күн бұрын
Hiya Keith-great job! RG is looking fantastic. Keep well.