It amazes me how people don’t read the goddamn instructions. Anything people see in a bottle they assume it’s just gonna come out and do magic.
@zackellis23Күн бұрын
I agree, people are so stupid sometimes.
@Taino5.02 күн бұрын
Griot garage
@random_dad992 күн бұрын
Wonder if I’ll see the srt around cause the only one I’ve seen around is mine 😎
@zackellis232 күн бұрын
@@random_dad99 you in Vegas?
@mattsmith27514 күн бұрын
We have the same one here at work and we love it !! Good choice !!
@zackellis232 күн бұрын
@@mattsmith2751 I’m happy to hear that! I’ve only used it once at this point lol
@1magnit6 күн бұрын
Dumbest idea ever.
@zackellis236 күн бұрын
Are you talking about the SRT4 specifically or in general?
@zoom60214 күн бұрын
The plastic plug on the AFM where the idle screw is missing. This is set from factory and should not be adjusted. Luckily the factory depth is stamped right next to the hole and you can set it back to factory by measuring with a digital caliper. You'll also want to do a smoke test to find and solve for vacuum leaks.
@zackellis2314 күн бұрын
I didn't realize it was missing the screw lol and I did the smoke test a video or two after this one. My leak was the valve cover. it was a huge leak. And I replaced the AFM with a used one and that fixed it.... Luckily I got a used AFM for $5 lol
@vicentegalvez144417 күн бұрын
Thanks man for this great video ! My alternator just died, I'm not looking forward to removing the valve cover, but I don't wanna drop $500 at the sho0
@zackellis2315 күн бұрын
damn.. $500 is crazy! hopefully it all goes smooth for you
@user-rl4ow4kh1s18 күн бұрын
You drive a Dodge Neon? LOL Pathetic!
@srt-4-thompson18 күн бұрын
Awsome seeing you pop out a video after a life transplant.. we all understand how hard it is with a newborn and work and unpacking.. keep it up🤙
@zackellis2317 күн бұрын
@@srt-4-thompson thank you! Yea it’s been hectic out here lol
@santospopescu295718 күн бұрын
Insulation for the garage door, so it will keep the temperature down.
@zackellis2317 күн бұрын
@@santospopescu2957 the door is actually already insulated and does a great job of keeping the heat out. The issue is it doesn’t seal to the wall very well. Gotta figure that problem out
@angry305524 күн бұрын
I my case i was very successful using the dye, but i did my 1986 Caprice floor carpet during middle of summer on my open driveway where temps are usually 105F-115F.😊
@MikeHunt205328 күн бұрын
Georgie is looking for Clark ….
@zackellis2327 күн бұрын
Aww damn! I’ll buy Clark a bus ticket back to visit lol
@mr.x8391Ай бұрын
I just got an E12 back on the road
@zackellis23Ай бұрын
Nice! How long did it take
@bjorndepauwbjorndepauwАй бұрын
Congratulations
@zackellis23Ай бұрын
Thanks. But there’s more to go!
@tylerseagle2034Ай бұрын
Cut out and reweld
@markadams5823Ай бұрын
What about the overheating issues?
@zackellis23Ай бұрын
Mine hasn’t overheated yet (knock on wood) but I guess if it happens, I’ll fix it! Lol
@MisterMister5893Ай бұрын
You look like that kid in King of the Hill.
@zackellis23Ай бұрын
😂😂 Bobby?! Don’t do me like that lol
@sixteen_12Ай бұрын
The rust cant but you can cut it out and replicerer it
@Gramma_Is_pissedАй бұрын
Great. Lots of people move, all the time, all over the place
@CampingwithRadios_kg6dveАй бұрын
My parents moved from Ohio to California in 1955. They had a 6 month old (me), no car (they traveled by train), no job, a $50 freight bill and $5 in their pocket. Hope you have a good life.
@zackellis23Ай бұрын
That is crazy! Must have been a stressful journey. I appreciate the kind words!
@stagedracing8150Ай бұрын
very cool video dude!
@zackellis23Ай бұрын
Thanks man!
@deanirwin3645Ай бұрын
What will happen to the E30?
@zackellis23Ай бұрын
I am currently fly working on getting the E30 shipped to Vegas. It IS NOT GONE! it will be back! I promise
@srt-4-thompsonАй бұрын
Congratulations 🎉. Hope this new journey is a life changer!!
@zackellis23Ай бұрын
Thank you so much!
@HI30sАй бұрын
Happy for you man! I got a 2 year old, in the middle of a E30 restomod. Keep inspiring man. I hope to move to the states real soon! Trying to get my E30 on the road ASAP! Keep up with the videos and congratulations, being a new dad give us dudes so much purpose.
@zackellis23Ай бұрын
I really appreciate the kind words! I can’t wait to get my e30 to Vegas so I can finish building it. Hopefully we cross paths when you make it to the states.
@pcsproductionАй бұрын
This is huge! Congrats
@zackellis23Ай бұрын
Thanks man I really appreciate it
@jorgevasquez-lz4beАй бұрын
Very good video thank you!
@divineserenity4029Ай бұрын
holy moly thats a lot of pitting
@zackellis23Ай бұрын
lol pitting is an understatement 🥲
@bigboy6969100Ай бұрын
I install it last month and I already have rust spots. How do I take it out? I paid about like 400.
@zackellis23Ай бұрын
you should be able to polish the rust off as long as its only surface rust.
@bigboy6969100Ай бұрын
@@zackellis23 yeah it’s on the surface. I just waxed it but to polish it. I need sandpaper and stuff like that right
@bigboy6969100Ай бұрын
@@zackellis23 I never polished the muffler. Do you have a video of it?
@bigboy6969100Ай бұрын
I like it even cop brakes neck, but never gave me a fixer ticket for it
@dawsonanderson7008Ай бұрын
been looking for a video that ain’t with a bunch of folks acting like they know everything about this stuff. i’m installing lowering springs on the 2018 jetta in a few days and i’ll be watching this video the whole time.
@sherriannbarecchio8890Ай бұрын
Carpet looks good but there are kids that watch your videos would've been just as great without the cursing
@milehicity303Ай бұрын
Do you have a link for that intercooler?
@zackellis23Ай бұрын
I do not but i can probably find one. Let me look real quick
@zackellis23Ай бұрын
www.cxracing.com/KIT-SRT4-IC0041-A
@milehicity303Ай бұрын
@@zackellis23 sweet!! Thanks.
@zackellis23Ай бұрын
@@milehicity303 for sure man!
@robsweekendgarageАй бұрын
I need me a car hauler. Can’t tell if there is something to lock those ramps into the wood ones, but make sure there is. Would be awful if they slid off and messed up ur ride
@zackellis23Ай бұрын
I shopped for years but I’m happy I finally have one and I’m happy I went 20’ over 18’. I thought the same thing when I was editing this video. I do not currently have a method to secure them together but It’s on the list of things to do.
@moparmadness8237Ай бұрын
Them leds are amazing, i have a set on my srt4 as well and in my dakota. Made a video about them on my dakota. Also i love your srt4 man!🔥
@zackellis23Ай бұрын
Hell yeah man! I appreciate the love
@ReginaIsoldeАй бұрын
These bulbs are a huge improvement. Gonna check what this brand provide for fog lights and my headlights. Is there a link to access?
@zackellis23Ай бұрын
Yea I put this link in the description. It was the wrong link but I corrected it lol
@daved2143Ай бұрын
I did my carpet on my truck the same way you’re doing it with that dye. Spraying it with the bottle it came out fine. Just let it sit out in the sun for a while and spray some more scrub like you were doing baking Son. No tiger stripes lol i’ll tell you one thing spray it with the spray cans, a lot easier, and it save time.
@zackellis23Ай бұрын
Hahaha I appreciate the comment. Yea I’m in no rush to try another carpet again BUT when the time comes I’m gonna rit again
@deanirwin36452 ай бұрын
Some of those leds can be twisted for proper orientation in the headlight lens, and that can also affect the light pattern. Is that the case with these?
@zackellis23Ай бұрын
It doesn’t seem to be the case here. But I will say the orientation seems to be good. I’m honestly so happy with these bulbs
@srt-4-thompson2 ай бұрын
Congrats on the baby. And I know the neon struggle with the headlights man. My alignment is trash, too.. I definitely have to check in to this brand!!
@zackellis23Ай бұрын
Thank you sir! These bulbs were a game changer for sure!
@jjcooler652 ай бұрын
Well, how stupid can you be to use a product tonight? Follow their instructions and expect it to work, what an idiot.
@michaelhollaway42382 ай бұрын
What’s size tires you running with your wheels
@funkmonkey59412 ай бұрын
How does the carpet feel after the duplicolor spray?
@zackellis232 ай бұрын
a little stiff. almost like it was spray painted lol. So not nearly as soft as it once was
@ThriftyGarage2 ай бұрын
Definitely got a good deal. I bought two 20' containers when prices were still inflated. I believe I paid more for the 20' container than you did the 40'.
@goatsmisadventures2 ай бұрын
Your closer to a port town ? Here in new mexico that's the price of a 20ft container...I bought a refrigerator semi trailer instead..48ft 9ft ceilings insulated..sold refrigerator unit for 2500..sold axels for 1000...don't sleep on reefer unit...
@zackellis232 ай бұрын
Yea I’m less than an hour from 3 different ports. And that’s such a good idea and I actually have a reefer unit on my property but I wouldn’t have the time to take on a project like that before I move.
@sheepdogpack75902 ай бұрын
For any futureblind hole you have to drill. Use a laser pointer to mark hole with bumper off. Then put bumper back on and your plave to drill will be marked
@zackellis232 ай бұрын
That’s what I would have done ideally but I didn’t have a laser and didn’t wanna go buy one.
@sheepdogpack75902 ай бұрын
You should consider a winch. If you ever have a catastrophic failure to where you can't drive up your car at track. Or, in this case, picking up a junk car.
@zackellis232 ай бұрын
I appreciate you watching my videos and commenting! A winch is on the list. I just got this trailer, I’m about to move across the country abd I have a newborn so I haven’t had much time lol
@aleksas47202 ай бұрын
My question is how rewelding the car can keep your body strong enough?
@zackellis232 ай бұрын
Are you questioning the strength of the welds? I figured having solid floors welded in is stronger than no floors at all, which is pretty much what the rusty floors were lol
@aleksas47202 ай бұрын
@@zackellis23 You answerd the question. I want to repair and learn to repair rusty car my self and thats why asking, the thing is my question is how safe lets say to drive a very old car lets say in this case E30 after rewelding everything basically. Still some parts your cutting that was manufactured in the factory with the whole body so the question is this if I cut rusty piece and I reweled a new one piece how strong this area will be. Obviously your floor is very rusty you put new metal sheet.
@zackellis232 ай бұрын
@@aleksas4720 I would say the repair can be as strong if not stronger than factory as long as its done well and correctly. I spend many years welding broken aircraft parts. If you can weld a broken airplane part, I would assume its going to be as strong as factory.
@srt-4-thompson2 ай бұрын
That's actually a pretty good deal for 2750.. i was thinking it would be way more!
@zackellis232 ай бұрын
I know you can buy a brand new one for like 8K. I was told they usually cost roughly 2000 to 8000
@mattsmith27512 ай бұрын
Now that's pretty awesome congratulations!! Great idea brotha!!
@zackellis232 ай бұрын
Thanks brother!
@buckwild65872 ай бұрын
"Look at this failure of a product, i didnt even follow the directions and it djdnt work! What garbage"
@zackellis232 ай бұрын
Learn from my mistakes. You’re welcome.
@paulrasmussen74592 ай бұрын
1. Yes, boil the water. 2. You needed to use Rit Colorstay after you dyed it.