Thanks for a great video tutorial, nice clear information, my question is do you know if this is the same procedure for a mk 3 ford focus navigator 1.6 tdci 2014 , ive had 14 years on the same ford battery so not bad goings I'd say , but sadly it's just gave up no warning, what make is your scanner? do I need to use a scan tool machine or not ?
@EducationPineappleКүн бұрын
@@IanJones-m4u yes I think it would be the same
@EducationPineapple4 күн бұрын
Time of changing Drum Brakes was at 227000 mile with 9 years of use.
@iceviceroy4 күн бұрын
And how to change the 3rd stop in window!?
@henrir43624 күн бұрын
About to do the bumper myself for fog light replacement.What kind of clips, screws, etc connecters would you buy in advance if the broken clips need to be replaced?
@frago19696 күн бұрын
I day after i bought my 08 civic it started pissing diesel from passenger side rear.The metal pipe rotted just were its clamped to the body.I had to cut a section and replaced it with fuel hose and clamps.That was 7 years ago.Funny enought the plastic body guard was twisted and out of shape like yours.I had to use a hot gun to straighten it out.
@EducationPineapple5 күн бұрын
@@frago1969 maybe it had the same 'accident'
@TwinnMeisterGeneral9 күн бұрын
Thanks for the video. Gonna try and diagnose my Hyundai Coupe as it has the same issue, and will refer back to this 👍
@debeerpaul13 күн бұрын
Cannot find parts anywhere for this Swindon piece of s....
@southbayla313717 күн бұрын
This is the exact thing I was looking for . My engine started getting too hot but temperatures say it’s at normal operating temperatures. I used the wrong oil and then it started happening
@David-ce3lr17 күн бұрын
Good video, just wondered do you have to take the arch trim off to remove the arch liner? I've got a mk9 civic, but can't find any videos, no they're both similar. Just wondered if the liner could be removed leaving the trim in situ. Thanks
@EducationPineapple10 күн бұрын
If it looks similar the MK8 then yes
@Themusicrebelo19 күн бұрын
Thanks
@PatrickBrosnanbuster19 күн бұрын
Thanks for posting this. I followed your advice after getting the battery replaced and noticing engine didn't stop when in neutral. I still don't know whether it has worked or not for fixing my auto stop/start but the process did get the 3 flashes of the battery so I know that if it is n't working I have got to look at other reasons; so one unknown is out of the way.
@mrahmed779622 күн бұрын
Great video
@doupak24 күн бұрын
what does that blue thing you can adjust at different positions do?
@EducationPineapple24 күн бұрын
@@doupak you adjust the blue thing with the twisty stick above it to adjust the level of the water in the tank before the water cuts off.
@akilipreston132026 күн бұрын
Wow you are rambling extremely too much should work on that but then again I hate y’all’s accents there extremely annoying to hear a uk accent
@barrypaul867126 күн бұрын
Thanks for showing how long it actually takes - and learning that the condenser fan helps lower the pressure and this helps charge the system.
@chez_splez572828 күн бұрын
idk if its just me but mine's sound quality is horrible
@EducationPineapple28 күн бұрын
The sound is good but not excellent
@frdzytt408129 күн бұрын
Can I remove strut without spring compressor?
@EducationPineapple28 күн бұрын
@frdzytt4081 sorry you must compress the spring or risk serious or life threatening injuries.
@mikeylikesit8829 күн бұрын
How the sound and picture quality
@EducationPineapple29 күн бұрын
@@mikeylikesit88 it's very good for both
@jonadigitalsАй бұрын
Best set up video ever. I just balanced my gimbal. Thank you so much
@niqo6925Ай бұрын
Perfect. I was a bit sceptical about my ability to fix this problem but I followed your instructions and in less than half an hour it's in service again. Many thanks
@niqo6925Ай бұрын
And no need to change the seal or call someone out.
@paulmclarnon6986Ай бұрын
A very clear and well explained solution to my Roca toilet problem. Spot on
@dasnazirАй бұрын
I was about to spend almost £200 on a new battery so my stop/start would work. However, I found your video, tried what you mentioned in your and now stop/start is working perfectly straightaway. Absolutely brilliant!! Thanks
@dmcresinsАй бұрын
Nice onr matey! I noticed yesterday doing the brakes on my accord there are somewhat hidden places that rust. I never know what the best rust preventer / restorer stuff is!
@jeffmee763Ай бұрын
If only he pulled the engine cover off.
@FordTransitvanАй бұрын
Thanks, made me laugh about taking an earthquake too
@gogoasa333Ай бұрын
😂😂😂😂 Those are headlitight washers lad... 😂😂😂
@alblondieАй бұрын
Why is half the picture green??
@derekth71Ай бұрын
Thanks for the tip about the possible inclusion of the easy access flap. So I shall cross my fingers and hope it's there when I look... 😁
@petergrisdale67972 ай бұрын
All the complainers ffs 🤦♂️
@jasonlunnon7512 ай бұрын
Having sane with my cad dts....engine gets extremely hot cant even chec fluid levels or nothing...temp gauge is not high its in normal range....i dont kno what it is gonna chec thermostat to be on safe side
@EducationPineapple2 ай бұрын
Take the auxiliary belt off when it's cold and rotate with your hands everything that turns...alternator, pulleys, tensioner, ac compressor....anything that runs roughly needs changing.
@glennmckie18132 ай бұрын
i found it usefuk to watch after spending last weekend for ages with mine, impact didnt work, shocking with punch too not worked, so i ended uo drilling head off, discs came off but rest of screw still in, them and the other side is a job for this weekend, im trying to soak them few times during week, to hopefully aid getting them out this weekend.
@pdk602 ай бұрын
I've been re-gassing cars for 18 years by removing remaining gas, vacuuming the system and then re-gassing with the correct amount from a cylinder which sits on scales. This is the only way you should be doing it. Top-ups are guess work, you will never have the correct amount of gas in your system, and you're likely to damage it because the gauges used with these cans are cheap crap and you'll probably overcharge it. For reference I charge £65 for R134a, and I go to the customer. Get it done properly...unless you don't care about your car?
@Cal-vi3ue2 ай бұрын
Jesus🤦🏻♂️ I’m pretty sure he said something about a key
@EducationPineapple2 ай бұрын
You have to buy a key in some cars
@karldingbat2 ай бұрын
I now buy hayse pipe freezer gas which is actually r1234 its only £24 for 600ml 👌
@HDXFH2 ай бұрын
R1234yf is another replacement used in EVs HFO gas, bloody expensive
@HDXFH2 ай бұрын
1st
@dirtyd21622 ай бұрын
*R152A* Thank me later.
@m0t0DuD32 ай бұрын
Money saver video … god bless you
@anniegajdosova2 ай бұрын
Amazing voice😊
@SomersetUpNorth2 ай бұрын
ive just put the aircontopup and there conditioner in (the blue and yellow can) nissan juke f15 took both cans ok and 2 weeks later ive had no issues so far. being done on my drive i have no way besides the cheap gauge that was included in the kit if its charged right but till its a problem it works fine for now
@user-qj7pb5gw3z2 ай бұрын
Hi folks - I need a second opinion please. I have a Ford Focus hatchback 2016/65 1.5TDCI and engine stopped starting abruptly last week. Told by Ford garage need to replace fuel pump (pump costs £800, need to replace Cambelt as it sits behind it apparently, then cos cambelt is taken off need to redo the cambelt as well) and labour so approx. £2500 to get it working again. Is this right? Where does the fuel pump sit? FYI - Cambelt was replaced last year, would I need to replace it? Thought the fuel pump may sit in the fuel tank. Any advice greatly appreciated, thank you
@EducationPineapple2 ай бұрын
you have to wait 7 days for me to get to my Ford virtual box in another property to give you that answer. In the 2015, 1.5TDCI it should be one in the tank...and the high pressure one was run by the cam belt if i remember... see my video on changing the cam belt. I will likely mention it there.
@user-qj7pb5gw3z2 ай бұрын
@@EducationPineapple thank you for your speedy reply though I believe the garage said it was the high pressure pump (behind cambelt) - the costs though are shocking so hoping there are alternatives. Also, there was no warning symptoms, the engine just cut out completely and does not start since - I will review your video in the interim, thanks again
@gavinmcdonald122 ай бұрын
Got some of the polish splashes onto the pain job😑 got some off but left small dots. Probably dried in. Any tips how to get them off? Before i go MacGyver on it😅
@EducationPineapple2 ай бұрын
Too late to mask the area...try using WD40
@CommanderFox20202 ай бұрын
Mine isn’t going into my Xbox controller fully
@EducationPineapple2 ай бұрын
If it works properly, just leave it alone. If other 3.5mm Jack's are also not going in properly then you have something small stuck inside.
@CommanderFox20202 ай бұрын
@@EducationPineapple thanks!
@takeborz53602 ай бұрын
Hallo from Take Astana Kazakhstan
@theenglishtrucker18492 ай бұрын
I agree mate, the halford cans of R134a are expensive. They were £50, then went to £60, now your showing them at £72! wow
@EducationPineapple2 ай бұрын
So far the new Hydro carbon replacement is giving cool air out but I need to wait for a hot day to really tell.
@dirtyd21622 ай бұрын
@@EducationPineapple is very flammable and dangerous It is made of propane you should look into r152A also known as AIR DUSTER its wayyyy less flammable
@kemalyldrm1172 ай бұрын
Tebrik ediyorum ustam evde tamir sevenlere güzel video olmuş . Böyle parça çıkmayınca ağlayacağım geliyor. Türkiyeden selamlar.
@EducationPineapple2 ай бұрын
Yorumun için sen
@er22192 ай бұрын
Very helpful, step by step👍
@brendanmorgan88322 ай бұрын
I wish I watched this video before. I just tried to fit mine and broke the green locks haha 👍
@EducationPineapple2 ай бұрын
yes they are weaker than match sticks
@PureLightG3 ай бұрын
what is the main beams beams button?
@EducationPineapple3 ай бұрын
on American Fords I think
@PatrickBrosnanbuster19 күн бұрын
@@EducationPineapple The main beams button isn't a button but the Indicator (left) stork which you can pull towards you for a flash of main beam and push forward into on position for permanently on. That's the case of 2015 Ford Focus TDCI.
@johnniewalker68653 ай бұрын
Why do I always get scammed. One life lesson. If it's too good to be true. It usually is
@EducationPineapple3 ай бұрын
Things to note: you need virtual machine allowed on your PC. Buy the Ford 2017 file. Call tech support if you get stuck. You can clearly see I am using the system, just need tweaking. See some of the comments below.