In order to put in a parental control do I have to remove all other wiring?

Did you have any problems with the bulkiness of the back of the lights and it wouldnt fit in the housing? My 69 el camino is having that issue. Got the buckets cut and still not wanting to fit. Keeps hitting the inside where the buckets sit

What if the power wheels your rewiring doesn't have a steering motor, where would you use steering motor wires that came with the harness?

Where’d you find that black spacer that goes into the wheel and the gear box?

So what you’re saying is that I can make a Jurassic Park Jeep that doesn’t have the rc unit and stuff, get the kit in the link, and then make it RC?!?!?

Do you have another link that one is out of stock

Will this work on the 12v Jeep gladiator battery powered? it is currently not remote controlled

You just have to pull the pins out of the connector and put them back into the correct position for the board, don’t cut and splice if you don’t have to.

I need an Upgrade..I need advice on a Hobby Grade Transmitter & Receiver,to replace the rinky dink controller..I need that 1mile range

Could you show me how connected the plug connection the high and low , when I turn on the high the low goes off on my 1963 impala

Sorry I was an idiot and didn’t realize the voltage controller was all the way down. I turned it to 1/4 and it works now thank you so much. I did notice on one of the drive motors when I stopped accelerating there was a very very small spark. I’m not sure if that is expected or not. I’m recharging the 12v stock battery fully and gonna try it and see if that sparks too. Any thoughts? Thanks for everything again

So all I need is 24 volt board with remote and an m18 battery adapter?

I did the exact same thing. It’ll turn on but won’t accelerate. Any suggestions? Thanks in advance

I did the exact same thing. It’ll turn on but won’t accelerate. Any suggestions? Thanks in advance

The motor that turns the wheels left or right mine doesn’t have that can I add it

So wait ... Say I have the 12v Star Wars Land Speeder that doesn't have a remote feature.... I could wire it with this harness combo and make it radio controlled!!?? 🤯

where did you connect the voltage controller before the control receiver or after that?

So i have the f150 can i swap it with this? Just curious if it works with any power wheels

I am not real handy. What kind of business can I take my daughter’s power wheels jeep to to do this?

Where did you get those black drive hubs that go between the motor and wheels?

4s is about the best you can do without fet replacing

Will the conversion work for huffy ride on 6V cars?

Are you running the rx30 with a single m18 battery? I heard the rx30 needs a full 24 volts. What voltage range is the jeep operating at? Thanks!

Will this work for a 12v volkswagen E Buggy?

How do you install the steering motor. I can't make sense of mounting the steering motor

What if I have a 3 motor power wheel? Like boomerang? Any help with that?

Syper upset cause its not not power wheels its only power wheels with steer motors

I used a cutoff wheel, and got it down to where I had to leave the spring mounts, but I still can’t get it to fit. How long did it take you to grind all 4? I have a 1975 Buick LeSabre Convertible

Where can I get the kit to make it remote controlled. I just spent 100 bucks on OfferUp to buy my daughter what I thought was remote controlled. I was told it was and it’s not now I’m stuck if you could help me out. I would greatly appreciate it because I can’t afford a $300 ones.

I wish I could see what power and negative supply wire you are connecting to the motor input. Mine will only work forward but disconnects when it’s backwards.

Thanks for the video going to attempt this tomorrow

Like i said like i said like i said like i said

I have (2) 24V Grave Diggers. Can u send me a link to a 24v i believe the one on the link is for a 12V

I didn't know Matt Stafford had a youtube channel. Nice.

Upgrade to the 24v board and jeep only goes in reverse? Any idea why

So I just did this conversion on a Mini Cooper but it’s like I don’t have power to it does this kit need 12v?

I just bought a jeep and it dont come with remote control so do i need to swap the whole wires ?

What if you need a steering motor?

Definitely nerd to do this if my 3 year old is getting a power wheel

Hey it's me again. Super glad to know you keep an eye on your KZfaq and respond back to commenters. So I have the absolute same exact hook up as you do or did except I didn't put a voltage regulator in it. Is there a way to hook up another Milwaukee adapter for a second battery so that each wheel motor has its own?

would this work on the radio flyer Tesla ride on?

Bro let me fix your dry wall. Just fix my power wheel.

So I’m not going to need to get a steering box. I have a real tree utv. I think you called it a steer motor. Or will it come with one. I didn’t see it in the amazon kit

Ive got a bmw k1300s bike ride on forbmy toddler but eanna make it remote controlled too. Think the kit you hsve would function the same for it? It has 3 speeds built in vs just a high and low

I hooked a 12v battery to a 6v car and smoked the radio,& phone charger right away!

Shematic diagram plz

Aside from the normal wiring of the radio itself did you have to change anything else out on the vehicle? I read that with modern radios the stock Alternator needs to be changed out for a min 94Amp one to be able to run the radio as well as other upgrades so as to not cause a short seeing as how stock wiring harness wasnt meant for too much power to run through them. Thanks

Did you remove the 7A L2 amp limiter to each motor?

Thanks for these videos, man. I swapped out the best choice battery and installed a ryobi battery yesterday. Right now I still have the stock board in (24v board arrives later today). The 18v 2ah batties i used ran just fine but had no movement with the 18v 4ah batteries.. should the board swap fix that? Also, If i wanted to eventually swap out this adapter for one to us my 40v ryobi lawmower battery, I assume itd probably fry the new board. What would be the workaround for that?

U will need a front motor to turn