Thanks for watching! 4000mah - 5000mah 6s pack

Thanks for watching! No you can't only can do the gyro and servo settings.

@@BuddyRC ok, thanks.

Thanks for watching! Snoopy has been fired as a test pilot now.... 🤣

Thanks for watching! I use this one personally www.buddyrc.com/products/buddy-rc-1800w-75a-24v-server-power-supply-copy?ref=gss7vtpb

Thanks for watching! They are the stock blades, I meant "longer blades" compared to the M2 v2.

@@BuddyRCthank you.

Thanks for watching! That could be a failing BEC on the ESC, I would check it with another radio.

Nick!!

Thanks for watching! What size are you looking for?

@@BuddyRC 600 and 700 size

Thanks for watching! The CG on most OMPHOBBY planes is on the wing tube.

Thanks for watching! The ARF should have the angle built in to the firewall.

Thanks for watching! Correct, the only way to have that not happen is to activate this mode on a switch. You would have the throttle curve on a switch so when you're ready to stage you can switch from a regular one to the new mode.

@BuddyRC I got it figured out. I had to put throttle input on a switch. Now if I hit transbrake ramping starts on release no matter how long I hold it

Thanks for watching! Unfortunately it was crushed in the box in the car on the way to the event that part got cracked and then failed about 50 feet up and took a nice dirt nap after lol

@@BuddyRC I gotta admit it Buddy. You hit a certain string in me with that video. Them memories just keep flowing. :) I just had to dig up that plane. Sent You a couple of pictures in an e-mail. But also figured "the almighty algorithm" would like another interaction on KZfaq. I guess that is why all the KZfaqrs always ask for comments. What i absolutely loved about that plane as a total noob - was that flat pack IKEA approach. I'd just stick 3 mostly flat boxes into my backpack and drive my bicycle around the outskirts of my city, looking for that perfect airfield. I'd snap it all together and in a couple of minutes i was ready to fly. 6 batteries did about 30 minutes of pure flight time. The transmitter that came in the box, did not inspire confidence, it looked like a cheap toy and the resolution on the controls was awful. So i found a way to connect a cheapo 6 channel radio to the 'mainboard' and still keep the gyro assist. The trick is to find a radio that uses Futaba S-FHSS modulation. So the new radio set did not change anything at all . Those little chinese servos still had horrible resolution, but at least now i had trimms on the transmitter and i didn't have to worry about range. "Planting it" is a nice way of saying it… In Polish we say we did a "molehill" - because the crater left by a diving plane in soft soil, resembless a molehill. Yes i've had one 'molehill' that broke the whole fulesage in half - there is some fibreglass epoxy'd to the underside of the plane. Instead of just byuing new wings, i drilled out the plastic struts and replaced them with a carbon tube - i lock the wings in place using steel wire pins. New wings are just around 25 dollars, but from what i've heard repairing is supposed to be half of the fun in this hobby. ;) I also broke one plastic strut on the horizontal stabiliser. Overall 7 out of 10 for the model. I chose the plane mainly because it was so perfectly foldable - but the joints turned out to be the weak points.

Thanks for watching! Flite Fest is held in Malvern Ohio and normally around June or July.

Thanks for watching! It uses a Xt60 in

Keep enjoying Flitefest!

Thanks for watching! I use the ELRS version to race with because it has the least amount of latency.

Thanks for watching! The Nexus needs a external receiver to work so a DSMX satellite receiver can plug directly to the Nexus