seriously great video, dealer said my car was too old to reprogram and I dont have time funds to mail out my "new' junkyard odometer. lifesaver
@hitechrrАй бұрын
I tried to do a 2016 Mazda6, and forscan didn't give the incode to do a parameter reset after replacing the PCM.
@kyrieeleison19052 ай бұрын
F me ,, get to fing damn point
@gensonadolfo84102 ай бұрын
imma reset my module and seat belt
@gensonadolfo84102 ай бұрын
did you end up changing the front sensors for the airbag
@venepollox883 ай бұрын
Hey! Do you think I can drive my car without the module installed? Also replaced the driver airbag, what about sensors. The front bumper was hit and then the airbag deployed.
@jamalnasah16255 ай бұрын
THANK YOU
@Ghash6398 ай бұрын
airbag module is damaged, I can't buy a new used one, it's nowhere to be found. Can they install another module?
@dennismadsen75949 ай бұрын
14:43 Excellent video well done. Lots of good information
@youtheneyes10 ай бұрын
You can set the mileage in the new cluster yourself with FORscan..
@EFC4299 ай бұрын
I'm in the process of doing that but where do you go?
@belrenmcglothlin247 Жыл бұрын
You were only having to do this because the air bag was released when you bought the vehicle right? Not because you're doing a cluster swap...? Sorry, I'm just trying to make sense of the process and what i need to do for my cluster.
@belrenmcglothlin247 Жыл бұрын
Who did you go through to have the mileage reset to yours?
@italktoplanetsbaby Жыл бұрын
Nope. Done with ford. NEVER again.
@mikestrick30 Жыл бұрын
I've ran this procedure about 20 times on my Taurus X and it says no keys programmed after every time. I'm out of ideas on getting it running again.
@FinishedProject8 ай бұрын
Did you ever resolve this?
@espinasanchezalan161 Жыл бұрын
You need the original pats keys for reprogram ?
@wegiel1987 Жыл бұрын
Hi very good tutorial, but I have a different problem. I have two PCM's both are configurated with my VIN but when I swap to the old one where I have more HP I cant start the engine. Is it enough that I will do a module initialization and it will start my old PCM. Cuz what I understand IPC is not sync with PCM. My worries are that I have only one key but 2 are programmed., I've lost one. My car is Ford Focus mk3 ST 2016 with keyless system.Can you give my an advice I will be more than glad.
@tjcoutee1507 Жыл бұрын
Same situation here did you figure out a solution to getting the vehicle back running or you pretty much had to erased keys & program new ones
@wegiel1987 Жыл бұрын
@@tjcoutee1507 my tunner clone the eeprom and immo to second pcm but change the map so it works now i can use both.
@josegarcia-th3pj Жыл бұрын
IT IS POSSIBLE TO WRITE VIN NUMBER ON A PCM
@wegiel1987 Жыл бұрын
It is but is complicated its better to do a back up of asbuild of the old pcm and write to to new one.
@manohafazzil Жыл бұрын
Was it for Base model. What year did you swap it with and what was your car.
@TDCInfinity Жыл бұрын
It’s a 14 you can tell by the old gauge cluster
@rdm21740 Жыл бұрын
will this also work with the OBDLink MX+ OBD2 Bluetooth Scanner?
@skittles777 Жыл бұрын
where do u send it to get the mileage reset? I'm trying to do it to my f150 10th gen
@MrWontstopthefunk Жыл бұрын
I need to replace my PCM. 2004 crown Victoria. I’m planning on likely junkyard pcm. Can I use the forscan software to do everything I need to do or is there more involved?
@niisteva2999 Жыл бұрын
I have a 2011 Ford Focus and I replaced the IC but I could not find the option to program the keys with FORScan.. Any suggestions?
@Calisal01 Жыл бұрын
So I replaced my pcm, have two keys have tried several times to reset them with no luck. Any tips? Ps I followed step by step on all attempts
@turbosbuggy2 жыл бұрын
Where do you get the forscan program and what version is it...?
@Megadad702 жыл бұрын
I USED FORSCAN AND ON MY 2014 FORD TRANSIT CONNECT SHOWS NO PATS?? SOME FORUMS SAY CANNOT DO ?SUGGESTIONS
@robertogomez81002 жыл бұрын
Thanks mate for the video, I’ll get a new key and test this.
@last75092 жыл бұрын
foreskin
@williamgillan65522 жыл бұрын
hi there i have downloaded forscan because i need another key prorammed ,the only trouble is , i have got the immobillizer flashing,so if i get another key cut when it comes to waiting for new key to be programmed the ignition will be turned off,but if i turn ignition back on,the immobillizer starts again,it takes hundreds of turns with the key to get it going again what i have done is delete my only key,so when i press the clutch down car wont start
@Theferg12 жыл бұрын
Hey sir what year is your Mustang? I’m wondering will a 2014 cluster work in a 2009? Thanks
@ApacheTech2 жыл бұрын
Would you happen to know if you could switch a 2014 gt500 gauge cluster into a 2014 mustang gt with a premium gauge cluster?
@Pessivesto2 жыл бұрын
you saved my life
@momenkhalaf24432 жыл бұрын
Hi Sir. Do I have to have a new blank key to do this or I can do it with my 2 Keys ( booth keys ar restricted to MY_KEY)? Could you help me please? Thank you
@robertjohnsonii17652 жыл бұрын
Thanks I'm going to order that OBDLink EX and download the Forscan software on my laptop and give this a try. I replaced the PCM on my 2000 F150 and need to do a parameter reset. I only have one key but ordered a blank transponder style that I'll have cut before running the program. That's my plan, fingers crossed!
@goromadness9755 Жыл бұрын
hi were you able to do the parameter reset with forscan?
@robertjohnsonii1765 Жыл бұрын
@@goromadness9755 yes I was. I ordered the OBDLink EX off Amazon, it’s the one for 59.95. Then I paid like $5 for the Forscan that I downloaded to my laptop. I think I ordered a blank ford key also from Amazon. I watched a couple videos and stuff I don’t remember exactly how I did it but once I had the scanner in the program download it and everything it worked like a charm. Still going strong with no issue now
@goromadness9755 Жыл бұрын
@@robertjohnsonii1765 Ok, I will try with forscan then, thanks
@MrWontstopthefunk Жыл бұрын
I also need to replace my pcm. How were you able to make the new pcm work with the forscan? I’m not sure if I need to have someone else flash it or if I can do what I need on my own with a junkyard pcm
@robertjohnsonii1765 Жыл бұрын
@@MrWontstopthefunk I ordered a new one from Protech auto systems out of Florida, essentially preflashed. Call them they’ll make sure they get you what you need and can give you some direction on the process. I paid $250. I searched a lot for a reputable place and glad I went with them. I still don’t remember exactly how I did it but Forscan was a must for programming the key. I think it ended up working with my original key and not the new key I bought, but I still had to run some processes in Forscan for the original key to work with the new pcm. Lots of googling and KZfaq and Once I plugged in the new brain, did some widgets in Forscan, it worked first try. I tried starting it just putting in the pcm but no-go. Fiddled with Forscan after watching KZfaq and it started right up and been running perfect since.
@To-Masz2 жыл бұрын
I have 2 cards for mazda cx 9 from 2008. I have a problem with keyless go. Once it works fine and in a moment I have to start the car with a metal key. The key flashes red while driving. Not when the immo is flashing and I can't start the car. I suspect that it is the keyless module or the fault of one of the antennas. Can I use a forscan to reprogram my cards? Is it safe?
@joeadler53792 жыл бұрын
My 05 Mustang V6 coupe. Was wreck 12 years ago. Driver side airbag deployed. The Body Shop used a 2006 GT coupe driver side airbag control module. From a Mustang that was hit in the rear. Can you use a 05 coupe V6 with in 06 GT coupe. Control module. Also is there anyway you can reprogram it without removing the control module with a scanner.?
@TimYo1872 жыл бұрын
Awesome video, I have a 2016 ecoboost premium I bought it used a few weeks ago an only got one smart fob so I bought one on eBay I received it today and my obdlink ex comes tomorrow. Will I be able to program my new fob like this? Thanks in advance 👍
@MichaelViewing2 жыл бұрын
Seems anything 15.5(16) or newer you cannot access the PATS which means you have to use the dealer or locksmith. Just tried on my 16 F150 and PATS was no where to be found.
@TimYo1872 жыл бұрын
@@MichaelViewing Thanks for the info, i figured it out after getting my obd link and ended up taking a ebay fob to the dealer thank god it worked lol
@Theferg12 жыл бұрын
Great video sir!! Sir I have a 2014 mustang that I installed a new engine into I also had to buy a new pcm bc the pcm got broke in a wreck. The pcm does match the old one!! I have one key to that mustang can I buy a new key have it cut and follow your video? Thank you!!💯👍
@ecobeastbuildsandmods46262 жыл бұрын
Yes. As long as you have 2 keys that are the correct type and turn in the ignition. The keys don't have to be the original keys that came with the car.
@Theferg12 жыл бұрын
@@ecobeastbuildsandmods4626 Ok cool. I’m going to be trying it in the next week and I will update you!’
@artman48903 жыл бұрын
Looks like you replaced your driver airbag as well, was yours deployed?? Also do you have a video on how to remove and install that as well? Thanks
@ecobeastbuildsandmods46262 жыл бұрын
Yes it was deployed. I'll see if I can find to video of the swap and upload it.
@ecobeastbuildsandmods46262 жыл бұрын
Airbag removeable is in another video and starts at 2:00. kzfaq.info/get/bejne/bM-kd9l2qZq8ZIE.html
@artman48902 жыл бұрын
@@ecobeastbuildsandmods4626 hey thanks, but I figured it out a few days back... it was super easy to remove and install the new one.
@MrJaceleigh3 жыл бұрын
I tried this and for some reason my 2 keys that used to work don't work anymore. Is there anyway I can fix them and get them to work again?
@ecobeastbuildsandmods46262 жыл бұрын
Did you try running the steps again? How many keys was you trying to program at one time?
@FastlaneTJ3 жыл бұрын
How do you get the track apps?
@adrianrodriguez42923 жыл бұрын
The gauge cluster comes with track apps but you’ll need to go into the IPC and change some coding to get it to work if it’s not on once you program the cluster, but if you do it yourself with forscan and get a cluster from eBay it should already have track apps and mycolor without having to change the coding
@DVRNGL3 жыл бұрын
@EcoBeast Builds and Mods Can you reprogram your old keys on the same vehicle? I have two keys programmed before and i have no admin key. I tried to use same keys again but something goes wrong. Any Idea?
@ecobeastbuildsandmods46263 жыл бұрын
I find it's easier to program the 2 keys first then use the spare key program option below the erase and reprogram option. Did you have 2 keys that turn in the ignition when you started the reprogramming? The keys don't have to be ones that were already programmed before.
@DVRNGL3 жыл бұрын
@@ecobeastbuildsandmods4626 I have a standard key which I used before (it doesnt work anymore after I remove mykey, just i can turn ignition on) Then, I purchased two programmable key from Ebay ( exactly like yours) and did not do anything yet. I wonder, Should I use new purchased key during reprogramming? Or I have to use old key?
@ecobeastbuildsandmods46263 жыл бұрын
@@DVRNGL The first time I programmed the old key and 1 new key. Since I was testing to see if the flip key would work. I then cleaned all the keys and programed just the new keys.
@XSeanxMeowX3 жыл бұрын
I have Ford territory 2004 sx, I had to take out radio to install upper storage bin, which had been broken, I stupidly left key in ignition, which I think erases it. I tried starting engine and it wouldn’t start twice, then the third time it did, however it doesn’t rotate back to ignition once the engine has been ignited, I need to manually rotate it back (I think I broke the switch, which I’m replacing and fixing myself). Once that’s done would I need to reprogram that key? I’m guessing yes.. can I follow this tutorial fir that one key? I have a laptop
@ecobeastbuildsandmods46263 жыл бұрын
You will have to have 2 keys to delete and reprogram new keys from the start. You can't get around that even at the dealer. It doesn't matter if the 2 keys haven't been programmed to the car before. As long as it's the correct Pats key and turns in the ignition before you start it will work out. It doesn't have to start the vehicle before the reprograming.
@XSeanxMeowX3 жыл бұрын
@@ecobeastbuildsandmods4626 unfortunately it was second hand car and I didn’t get 2 keys! However I look on internet and i needed to lock, unlock door (hold for 20-30 secs) and it reprogrammed the key!! When I did it the first time I broke the opposite switch metal pry and got it fixed! Now everything’s fine 😊 However what’s the best way to get more keys? Coz I’ve only got one now 🙃
@monkeybusiness633 жыл бұрын
When I download the new version because I changed laptops. And it won't work with cable but does work with my cheap Bluetooth adapter
@bricecay17653 жыл бұрын
Hey, did you have any problems or issues with the company that you sent your module too? I got a 2017 GT from copart and Ford quoted me at $700! $200 for labor and $500 for replacement module. Thanks.
@bricecay17653 жыл бұрын
And I'm hoping to send it off to a company here within a week but don't know which ones are reputable and legitimate.
@ecobeastbuildsandmods46263 жыл бұрын
Just a little over a week turn around. Just plugs the module back in and resynced the module with the ECM.
@auto50993 жыл бұрын
@@ecobeastbuildsandmods4626 hi, where can i get the rcm module?
@azntactical48843 жыл бұрын
I bought a cheap laptop and lifetime forscan just reprogram my keys because i only received one key when i bought my truck.
@midas6173 жыл бұрын
Will this "Key Erase and Reprogram with FORScan" be the same process on a 2011 Town Car?
@ecobeastbuildsandmods46263 жыл бұрын
The security wait time could be shorter but yes.
@midas6173 жыл бұрын
@@ecobeastbuildsandmods4626 I did it today. it was the same wait time. thank you!
@DanOfAllTrades3 жыл бұрын
Can it do 2019 F350 pats?
@ecobeastbuildsandmods46263 жыл бұрын
Majority of Ford models starting from 1996 model year are supported. Link below is the OBD adapter I use. No need to flick a switch, automatic. No affiliation or kickbacks with Forscan or Amazon. www.amazon.com/stores/page/A539CE77-1BB3-4897-9C03-4F13CAC8F48B?channel=forscan&tag=obdlink-forscan-20&linkCode=ur2
@thestateofreal25333 жыл бұрын
I’m having issues all over. I’m trying to program a new pcm but when I go to config/program click on PCM module configuration (as built format), hit run service, it throws the warning about changing configurations is not safe and have a ABD backup, click ok, it loads to 50% and says service procedure has been interrupted and it won’t go any further. Any help would be great. I’m lost.
@ecobeastbuildsandmods46263 жыл бұрын
What was wrong with your old PCM? You would need to save the original program, swap PCM , and then write to new PCM from the save file.
@thestateofreal25333 жыл бұрын
Mine doesn’t show pats programming just ipc module reset. Any idea why?
@ecobeastbuildsandmods46263 жыл бұрын
Can you send me a screen shot?
@MadelineMetzger3 жыл бұрын
Having the same issue
@thestateofreal25333 жыл бұрын
@@MadelineMetzger I found forscan doesn’t support pats for mg 2017 Ford Focus se had to buy a vcx nano for Fords and download IDS v121 and use the IDS patch to use it free.
@davidbalfour82062 жыл бұрын
@@thestateofreal2533 So did you delete admin keys and program new keys. In other words did you just add a key or did you first delete all keys then add keys?