Thanks man! You provided a lot of great info and your video was the one I kept on referencing. Was able to change mine successfully! Fixed my washer issue too (it kept on pausing on wash/rinse cycles because of the water level). You earned my like and subscribe! Can't afford my first house quite yet, its 2024 and prices are crazy, but I'm sure i'll be revisiting your channel when the time comes. Keep up the great work!

I have changed the sensors and the lights seems right to me.. one is red and the other is green. but when I press the wall console (wireless); all i hear is clicking sound.. I have legacy 650 and WIRELESS WALL CONSOLE, OVERHEAD DOOR - 39903R. the light bulb is working (power) is there.. I press the opener remote, I hear the click sounds.. nothing else. my opener is only 2 months old.

you are just lucky to have the stop valve screwed into the pipe, mine used soldering to the pipe, the box is plastic, there is no way to use a flame at all, can't understand why those idiots install the valve using soldering with a plastic box.

Very informative, covered things I hadn’t thought to check. My problem is my trolley won’t latch back together. I’m sure I’ll figure out soon than later, I did enjoy your way of speaking,thank you

Omg that music🙄👎...I rather look another video.

Thank you!

And thanks for talking to explain. Ive seen videos wherevthey dont talk thru what they're doing and it's impossible for me to understand what is going on

Dang! So much info! I hope I can pull this off without calling a plumber! 😳

Are the weatherstrips still intact?

Thank you for the video, helped me trouble shoot a wiring problem and saved me a lot of time.

Good he did a lot

back ground music has to go. good video tho.

Sorry. Can’t concentrate with that music.

Best garage door troubleshooting video I've found. Thanks.

the music, not needed.

Hello , my genie powered garage door has 2 inches blanking red lights : how to reset

OMG, I think I'm in love.

Excellent video 📹! Reprogrammed remote per your instructions and back to normal 😀 👍

is there some way to turn off the background music? thanks!

Great video.

string find length divide by pie that is your Outer diameter

How to set the limit switches

Limit switches have not been set yet

Unfortunately, I couldn't make it through much of what was an informative video, but I had a hard time hearing you through the music

Wait, how do you have that much knowledge if it's your first time? You are giving us more valueable information than a plumber!!!!!!😳😂😂😂😂😂😂😂😂

Music is so distracting

Hi! Currently trying to replace my leaky washer valves. I can't read the stamp on the valve because it's so corroded. I measured the circumference of the pipe with a tape measure and it is 1 inch. Is that the nps size in your table? Not sure which size I'll need bc most videos says I'll need a half inch. Thanks!

I like the music when you are moving the washer 😂 Good job though! Thank you 🙏🏼

Thanks for making it so easy, it really was!

So if you had a leak that caused a bubble in your floor, (Particle board(s)) would it be a good idea to patch the bad spot on the board(s) or just go for the whole bathroom. We had already thought of remodeling it anyway.. but is it easier to pull apart the floor with everything out?

This is the most comprehensive video, thank u so much to taking your time to do it for us:) I think u should be a garage experts bc your video has more details than anything I ever seen

Garage door works with wall pad , but not my remote and yes it has new batteries Help!

My garage door seems to have become disconnected from the chain. Your video shows that you can slide the connection onto the other part and it clicks into place. Mine doesn't click, and if I turn on the chain, it just slides and the chain doesn't move the door.

Doing this at my daughter's house on Saturday. Thanks!

Sorry dude couldn't hear you over the snares...

This was very thorough, thank you! I wonder, did you try tightening the packing nut or even replacing the packing nut washer before going to the trouble of replacing rhe valves?

How did you know whoch genie sensors to use? Model or serial number? I think my opener is from the 80s 😂

Thank you so much ..I will be doing some minor work on our house since my husband is at work all day your information on these repairs are so helpful for me to pitch in and do my part 😊

A suggestion... Replace any water valve with 1/4 in valve. Think of this - If there is a leak and you immediately need to turn the water off...1) Hear or see leak, 2) run and find leak, 3) turn valve, turn valve, turn valve, turn valve...... That type of valve works well on outdoor faucets, always replace with 1/4 in turn off value. It take just a 1/4 in turn and the water is off....So replace them is my suggestion. Also, another factor that makes turning the water off quickly is the limited space for you turn the valve. I would replace them if you fear another leak.

thought i needed a plumber then realized i believe my water valves are screw on not soldered so next problem is getting them off...mine are separate hot and cold not in a box..pipes are exposed...have that handle like you are showing but the intake side needs a female end i believe and the washer hose end is male to connect hose...id like the ball valve if thats possible....does it matter if thats not what i have already? started leaking at the handle then at the stem so its time for just taking the whole thing off...i think i can do it myself...if i can get it off lol...

Poor poor job

Good Job and Great Patience 👍

What are the 3 buttons on the fob for?

I have a question. My valves are working ok but the on/off handles are broken. Do I have to disconnect my washer to replace the handle? I have the connection on very secure and I don’t want to disconnect unless necessary.

14:57 As an amateur weekend warrior I am thinking that there is no water in the washer pipes right now, so if it does have a leak we won't know it until the hoses are reconnected and there is water running through them. Am I thinking right?

Very good explanation. Video would have been better without the "overpowering" music.

This setup is makes it pretty easy to replace the valves. Unfortunately 90% of the boxes out there have the valves attached to the box and soldered on below in the wall. This opens up a whole can of worms with soldering in a flammable wall and cutting into drywall. I would recommend some shark bite valves and fittings for that setup but you should have some prior plumbing experience before attempting it.

Didn't actually show me what to do, but it showed me what not to do, but I already knew those things not to do before watching the video.

XCLNT PRESENTATION, ALOT OF OVER-ALL TOPICS VERY WELL, EXSPLAINED !!!😎😎😎😎👍🏻👍🏻👍🏻

I love this video and your ability to laugh at yourself. 😅 I subscribed right after I watched the first one. Now, I have to get up and actually try to fix the weather stripping on my own door. I appreciate you showing your mistakes, hopefully I will have learned from them. 😊