Mines not going in that easy keep stripping the threads
@Iroc_twan18 күн бұрын
@@BrandonChenier-dc9yo do you have the right size studs
@BrandonChenier-dc9yo18 күн бұрын
Bought 4 studs at two different places same result. I was using handle part of crescent wrench for a spacer going to try stud installer tool tomorrow
@Iroc_twan18 күн бұрын
@BrandonChenier-dc9yo with a crescent wrench it's centered pulling at a angle
@jacobnorth864227 күн бұрын
Was thata DOD 5.3?
@Iroc_twan26 күн бұрын
Yes dod lifter
@carlitocolossalАй бұрын
This definitely worked for me , Easy install too , thanks
@sublimittrentАй бұрын
I'm pretty sure you can change it to psi. At least my 3.0 can. If you swipe over when you're on that screen where those blue half circles are on each side of the screen you can go to the settings also in the area you set up shop info and change your settings metric standard and I think there's two other choices one may be both
@Iroc_twanАй бұрын
@@sublimittrent I will check thanks
@RonRussell-sj1zf2 ай бұрын
Oh no, not a 2024 Chevy 4-banger down for major engine work! I thought only Toyota had these type of failures?
@Iroc_twanАй бұрын
Nope gm has a real problem
@MrShortyred2 ай бұрын
Sorry he did not Crash...🤪🤪🤪🤪
@Iroc_twan2 ай бұрын
He can drive no crashing here
@jackthelab67552 ай бұрын
Awesome 👌
@DustinKeating-yk3vq2 ай бұрын
Hope since you got it tore down like that you going to put the afm delete kit on it
@Iroc_twan2 ай бұрын
Aftermarket warranty only will pay for stock replacement
@johnvictorgelsomino16422 ай бұрын
@@Iroc_twanAnother reason to never pay for a warranty.
@joseg24773 ай бұрын
hey whats up twan !! hope your doing good
@Iroc_twan3 ай бұрын
I'm good who is this
@silver2green4 ай бұрын
I still have that cobra after all of these years
@Iroc_twan2 ай бұрын
What's up Chris
@Luminous.DynamicsАй бұрын
That was u?
@Iroc_twanАй бұрын
Who
@Luminous.DynamicsАй бұрын
@@Iroc_twan cobra guy
@joefein94696 ай бұрын
I bought a bbk 58 no issue ever
@bradlyle5854 Жыл бұрын
What size is the dowel
@Iroc_twan3 ай бұрын
5/16
@alchampion340 Жыл бұрын
A little lubrication wouldn’t hurt. Run the fool out of that thing a man. I may have to order one for my lt1
@lancewardlaw4880 Жыл бұрын
2023 Damn Man I miss my teen yrs
@georgerodriguez88 Жыл бұрын
Mine is only a back up I have not idea if I have that
@juneq561 Жыл бұрын
the two seal direction.. did you put inner seal (black one) facing inward towards the engine and the yellow seal facing towards outside?? or both facing outside?? Thank you
@2ndAmendProtector Жыл бұрын
I know this is a long time ago. Maybe you still check these messages. What 2 bolts on each side in the rear of the subframe do you remove? Then I see you just loosened the front bolt on each side. Then unbolt both engine mounts. When do you actually lift the engine? Or just put some lifting tension while you unbolt the bolts, then lift it up about 4 inches?
@jrmecanicymas2643 Жыл бұрын
How you start
@David07R1 Жыл бұрын
I think I heard you say you used the stock driveshaft. What slip yoke did you use and did the stock driveshaft need to be shortened??
@markcasco Жыл бұрын
Well done sir
@jordangates859 Жыл бұрын
These niggas sliding with traction on 😭😭😭
@TheDafashionista Жыл бұрын
That cobra was the cleanest with that chameleon candy paint!! Y’all had to be there 😂
@isaacgreen1599 Жыл бұрын
Hey what's up bro how you doin did you change did you change your studs in your hub for your rooms to go on so little longer
@Iroc_twan Жыл бұрын
Factory wheel studs
@isaacgreen1599 Жыл бұрын
@@Iroc_twan cuz I have a 87 Camaro 3rd gen on 24s and the stock ones with long enough and it messed up my holes on the rim
@masterface123456789 Жыл бұрын
What does she run on the track tho
@Iroc_twan Жыл бұрын
Low 9's
@2pacnasgame Жыл бұрын
By any chance you try the strion version
@Mr.SpongeGlockAK47Pants Жыл бұрын
Look how much fun ppl had back then, streets/sideshows In the town ain't the same nomo . Im guessing this is 97' 98?
@Iroc_twan Жыл бұрын
Yes around that time 97
@Mr.SpongeGlockAK47Pants Жыл бұрын
@@Iroc_twan you real MVP for this one forgotten timeless real sideshows 💯🔥🌃
@judahisrael22332 жыл бұрын
Should have got black cuhh
@hyphiegirl122 жыл бұрын
Before the genterfication of the sideshow
@KA-ho5cp2 жыл бұрын
Nice work!!! Do you have a contact number to discuss an install?
@Iroc_twan2 жыл бұрын
Where are you located
@KA-ho5cp2 жыл бұрын
@@Iroc_twan Bay area
@KA-ho5cp2 жыл бұрын
Do you have any experience with LS Swaps?
@Iroc_twan2 жыл бұрын
@@KA-ho5cp I have not done any yet but I know about them
@KA-ho5cp2 жыл бұрын
just another learning curve to add to the skill set.
@carlisleevans60182 жыл бұрын
😲😳 wow.....well BBK for me
@Iroc_twan2 жыл бұрын
Yes
@ruanonery78942 жыл бұрын
Está bien loca se seca
@MrJD240sx2 жыл бұрын
Lmao and don’t even show the battery health? Worst demo ever
@Iroc_twan2 жыл бұрын
Nothing to show the matco is junk
@lesleyanderson2172 жыл бұрын
Hello, I currently own this and was wondering if you could tell me what radiator and evaporator did you use for this build. The evaporator is bad and need to replace. It's not Volvo or Camaro. Any help would be appreciated.
@zackhod86612 жыл бұрын
Now this is a low profile car... NOT a off road vehicle 👀🙄
@CsRt405112 жыл бұрын
The shit I would do to be there
@1977TA2 жыл бұрын
This is mad! GM designed it that way to make it so difficult you had to take the car to the shop and pay the inflated labor cost. For something as simple as replacing a $20 gasket you'll end up paying the cost of a transmission rebuild if you let a shop do the work so the only way around that is to do it yourself or have a skilled friend who will do it for a reasonable fee. It sucks because my oil pan is leaking and it's annoying dealing the oil drops hitting the exhaust parts creating smoke that leaks from under the hood when I'm idling at red lights. Also, the pain of dumping quarts in the engine frequently so it doesn't run dry.
@superchevy88442 жыл бұрын
How’s the figment
@expatconn72422 жыл бұрын
What’s that tool part number ?
@Iroc_twan2 жыл бұрын
Trick Flow Specialties TFS-90306
@erickalmaraz68372 жыл бұрын
I attempted to change my oil pan gasket years ago and failed with my 2002 camaro ss. Did not think it was going to be complicated. So what I ended up doing was I put silicone on my finger and added to the edges of the pan all around then closed her up. Well what do you know, it worked. I had no leaks after that. I just recently bought another camaro and will be doing the same.
@erickalmaraz68372 жыл бұрын
I don't remember, it was 10 years ago.
@swron_rules Жыл бұрын
@@erickramos7471 Forums say to use RTV
@b.noble21242 жыл бұрын
Why tf u got a Audi sign on a Tesla u just fucked everything up thumbs down bruh
@Kk_11002 жыл бұрын
That camaro tho lol
@mezziemezole43142 жыл бұрын
I’m pretty sure that was an Audi RS3 not a tesla
@busman72282 жыл бұрын
You need to speak up
@isabellam19362 жыл бұрын
Thank you for testing it in the dark. So many light reviewers don’t which is crazy because it a damn flashlight.
@yerbabuenagarden4042 жыл бұрын
This is nasty sickkkk
@ws6tex2 жыл бұрын
The mystic tho, no hands tho
@exozilee36912 жыл бұрын
Memories I had a ss camaro . i had to sell it to buy a denali . 2 kids , my wife was like lol👈 we need a bigger car .