Thank you for that comment, really motivates me to make these videos. Glad it saved you headaches money and time.

Also toyota...most emblems now standard black, I know i could have ordered it black and had dealer install but their mark up was crazy. I did next best thing and bought the genuine H Logos from local dealer and did myself ...I think it even comes out better since i took my time and made sure not to damage paint or anything around it compared to a honda mechanic who just wants to get to the next job. Anyway thank you for the comment.

Thank you, Glad it helped.

Glad it was helpful!

Just defrosted freezer after 4 years and it was a five minute job thanks to this set up. Another plus

Thank you, No that does not happen, I have upgraded and now have the zflip5 so cant compare......My zflip 5 is now starting to have the screenprotector delaminate again and its only 8 month old so its going to be a constant issue with these phones.

the position of the cover does not really matter for charging since th ecover has nothing to do with charging, ....did water or anything else get in there? Might be a bad charger maybe?

correct, as explained in video i only removed the full cover to get a better video and view for people but all that is needed is just to loosen a few clips enough to get in there, Glad it helped.

.

nodiference, i have also drilled holes on one of the bins and put the same food in it, I didnt notice any change whatsoever .

if your car is also overheating most likely fans are bad.

No i got new honda ones.

i just had this issue this month....you have to do it when the hole is fresh ...usually early in the am or in the evening when its getting cooler. I just had another one this month and i was catching the hole about a day later and at that point hole was gone....I made sure to go out in the morning and look for the fresh hole and bingo!

@@JackofAllCarbinc thank you for the tip, I will try that

Thank you for that... keeps me motivated, Will try my best really feels good knowing people are actually watching and hopefully saving money on their repairs.

I wonder if anyone has fixed their issue by replacing the MICU.

i believe he has to reset the immobilizer first then reprogram key...I had problems with honda too.... i got the run around telling me i had to contact honda corporate...blah blah . I went thru 3 different dealers and finally 1 gave me the code. It was the dealer I had previously serviced car and they had my vehicle on record showing it was under my name......Its not easy but its doable.....I had to convince them i could not get my car towed and needed code so i can take to them to repair. They were very hesitant but finally one manager gave it to me. Please keep us posted.

alot more expensive i would think

really glad it helped, and thank you for the comment.

glad it helped

thank you , glad it helped

your welcome, hope it saved you some money on repairs.

Glad you liked it!

Glad it was helpful!

good luck.

ouch, I was really scratching my head and it was hard to figure this out ....almost got me to the point of just selling for a loss as a parts car but luckily was able to figure this out.

Yep, I liked this dealer .....I paid 1000 less than msrp (most dealers wanted msrp plus all their add ons) including wheel locks mud flaps and no mark up. Dan the finance guy was really cool to, did not really try and force any extras(warranties/extra coverages/window etch blah blah )so final price out the door was 1000 minus msrp plus mandatory state fees. Only other dealer that compares would probably be the cerritos honda since they are the #1 on west coast so they want volume and can also get good deal their. Anyway thanks for comment and hopefully video helped you install your emblems on the cheap.

@@JackofAllCarbinc yes it did. Thanks for the video. Already installed this and splashguards 😎 love my new Si

Thank you for comment, hopefully helped you save some money on the repair.

Glad it helped you and thank you for the comment.

Thanks for comment, I am really happy with my option, it makes it look cleaner and you can save some money, I dont like the ebay stuff either since alot of it is not high quality....same reason i stayed away from plastidip, .....looks good for a week but after a while looks very cheap.

There's has silver writing, but it's the closest I've found

@@Jrk_1986 ell let us know how it turns out and what you decide.

no es la llave ,,, tienes que acer reset all immobilizer and then reprogram a new key.

Honda dealer only

Is it the same as the code to reset the battery?

@@brittanyjeffrandolph7497 never heard of code to reset battery ....this code is only for bypassing the immobilizer.

@@JackofAllCarbinc I have no clue why I put battery 🤦 I meant code to reset the radio after you unhook the battery 🔋

@@brittanyjeffrandolph7497 lol I kinda thought you were talking about that or was someone trolling but the answer to that is absolutely not. The brake code is not really known to 99 percent of people. Believe it or not some Honda techs had no idea what i was talking about when i called the dealer but the older guys /managers know exactly what that is. Every honda and acura had these codes which allows honda to bypass the immobilizer for reasons like failure or back then if car payments were not made the dealer can repo the car without the need of a key. Of course that code will not be given to just anyone, you MUST prove that you are the legal owner of vehicle and have no debt on car. Radio code is completely diferent that only will unlock the access to your radio.

not sure brand but here is where i got it www.kqzyfj.com/click-100940843-13857663

www.kqzyfj.com/click-100940843-13714609 here is where i bought not sure on brand

Wondering the same

Hi I got mine direct from my local honda dealer but they can be bought online thru honda parts websites.

Welcome

so glad it helped and thank you for the comment, That means more to me to know people are actually getting something out of these videos and best of all saving money.

Glad it was helpful!

so glad it helped you out, Thank you for comment I really enjoy the fact that people are doing these jobs on their own and saving themselves the money, Its very easy to do that anyone can do, just wish manufacture would show install videos that the normal person can understand.

Hi pretty sure that hose should bee near by if it came loose, try and trace it from the windshields down, it might have came loose but i dought it is completely missing unless car was in major accident.

you can also add fluid and see where its leaking from thats where the hose should be.

spare might not work ...i tried mine and it didnt since the immobilizer lost pairing with the code. so neither keys worked.

@@JackofAllCarbinc you're exactly right. But I appreciate your knowledge. It saved from contacting a mechanic. Thank you again

Glad you liked it! Thanks for the comment.

Great point!So far Im happy with it ...at least for my needs.

glad it helped and thank you for the comment

your welcome

I dont think they are that bad BUT You have to upgrade every year to keep that warranty going so i have done it past three years on every flip and it costs me around 140 to upgrade to new phone.

You are so welcome!

No hay proble si uno lo conecta rápido después q le ensambla las rueda

@@normavarga6173 not if you didnt tip on its side ...if you put on its side you will need to wait at least 24 hours after its sitting upright.

glad it helped and thank you for the comment.

Your welcome, glad it helped and thanks for the comment

if you have the green light and its a new battery ...issue is the immobilizer, First get that resolved then you can take your battery to get recharged, I had same issue since the car kept cranking and not powering on it drained my battery since car never turned on when the issue started and didnt allow the alternator to recharge battery. It can be a possibility that the alternator also went out but if it was me I would ......jump the car or get recharged then fix immobilizer if green light goes off but battery still dies then its either a bad battery or alternator.

so glad it helped and best of all saved you around 150 compared to dealer cost for something anyone can do in a matter of minutes, worst part is dealer charges you to replace a defective part they install on vehicles. Not only that but they will put the same factory kia part on your vehicle so that you have same issues in a few years.

Can you please provide that Amazon link? I can’t seem to find it. Thanks

@@LDMTX6 find parts by clicking here and enter Part Number: W0133-2378127 or Part Number: 377162 www.kqzyfj.com/click-100940843-13714609 is from parts geek

@@JackofAllCarbinc thank you

@@LDMTX6 Your welcome, Please let me know how it turns out.

True .....once the factory coating smell rubs off its almost a 100 percent catch every time.

those pins should be an outer circle and inner circle ,...you are removing the inner push pin correct?

Yes

@@JWells-ug3pm then those should be only thing holding the cover.....I would have to see it but usually thats it, there should be another video on you tube on how to remove the cover if necessary

glad it helped.....sometimes when they are new they dont close shut with same force due to new coating so maybe just give a few more hours before going to retrieve traps.