@@ReturningtoBasics how do you do this? There are soo many! I would love to be there to see it in person honestly
@ReturningtoBasics2 күн бұрын
We feed them, and other groups, daily. They're getting quite used to it and becoming friendly (or unafraid of us).
@popollo226 күн бұрын
I can't even get the top part off on my 4th one, stuck in there real good. I know from experience from the 3rd one if it pops off at the top, compressed air pops it right out.
@ReturningtoBasics6 күн бұрын
That’s a good bit of information to know. Thanks.
@Charizard7706 күн бұрын
I love acorns! I have since i was little!
@ReturningtoBasics6 күн бұрын
Thanks for watching and sharing.
@SerenadaWildlife10 күн бұрын
So cute
@ReturningtoBasics9 күн бұрын
They are. They really warm my mother’s heart by their daily visits. Thanks.
@zn_gabe137712 күн бұрын
I got a 1100 and I did nothing to it and I can shot 3inch shells no problem
@ReturningtoBasics11 күн бұрын
It would be safer if you have the chamber extended. I hope you don’t have any issues. I also hope you old Remington lasts you many years. I really love mine. Thanks for watching and sharing. Good hunting.
@Neverdie24213 күн бұрын
How much you spend a year on corn to keep them all fat?
@ReturningtoBasics12 күн бұрын
Lots!
@uriel-heavensguardian894913 күн бұрын
Thanks for the video
@ReturningtoBasics13 күн бұрын
You bet.
@SuryaTechie15 күн бұрын
What kind of cheese ? I read that must be mozarella
@ReturningtoBasics15 күн бұрын
Colby Jack.
@zoemorgan209318 күн бұрын
Thanks for the simple, easy instructions on your video!
@ReturningtoBasics18 күн бұрын
Glad it helped.
@JesseeRose-b8r24 күн бұрын
Never had problem just don't push Silver Bodywill it loader
@ReturningtoBasics24 күн бұрын
You’re fortunate. Many others had the same experience I did, however polishing the internal components had really helped based on the numerous comments I have received. Thanks for sharing and watching. Good luck with your SAS.
@evan779529 күн бұрын
Thanks for the video, just ordered coils for my 76 motor. Different part, but same procedure
@ReturningtoBasics29 күн бұрын
You’re welcome. Good luck with your motor.
@PanamaSticks29 күн бұрын
Will the brake cleaner mess up the catalytic?
@ReturningtoBasics29 күн бұрын
No. It also will evaporate well before any problems occur with a coil, boot, piston, or anything else.
@joe.r107629 күн бұрын
Did you loop the ball thru the cable?
@ReturningtoBasics29 күн бұрын
Yes.
@joe.r107629 күн бұрын
Appreciate it
@arindambanerjee515Ай бұрын
That is a great demonstration and answered my long-standing question about what type of paint to use to paint the IBC Totes. Thank you very much. I wanted to know if you painted the bottom of the Totes as well; I just want to make sure. Also, can you please mention the exact paint you used and how many such cans I will need per 330-gallon tote? Thanks in advance! We appreciate your taking the time to educate us.
@ReturningtoBasicsАй бұрын
You’re welcome! I did not paint the bottoms as they are fully covered by the metal cage. Also, I used Rustoleum enamel (which is alkyd enamel) that I sourced from Home Depot. I used spray cans of Dupli-color adhesion promoter (CP199) to treat the tanks before spraying with black paint…so it would stick. I reduced (thinned) the black paint with about 25-30 percent mineral spirits. Hopefully that information will help you get through the job. Let it dry well before putting the tanks back in the cages. My totes are still holding paint well years later.
@ReturningtoBasicsАй бұрын
Also, I think I only used two gallons to paint 6 totes. I also used about one to 1.5 spray cans of adhesion promoter per tote.
@arindambanerjee515Ай бұрын
Thank you Sir, appreciate your help 👍
@robinjackman2080Ай бұрын
You are the man! Worked great.
@ReturningtoBasicsАй бұрын
Thanks for watching and commenting.
@Neverdie242Ай бұрын
Are growing your own deer now?
@ReturningtoBasicsАй бұрын
We get it at a feed store in Imboden.
@TheRealJLucasАй бұрын
go right to short hook pick!!
@ReturningtoBasicsАй бұрын
Thanks for watching and sharing.
@dbusby77Ай бұрын
I have sanded / polished several of my cheap semi-auto pistols (.22lr and 40 S&W Hi-Point) and I have never had a problem at all. I use 3M automotive sandpaper starting in the 320-600 grit range and then move up to 1000, 1500 and sometimes 2000 grit. Polishing the face of the feed ramps can really insure trouble free cycling. I also get a smaller than chamber wire brush on a cheap brass section of cleaning rod, wrap at least 000 or finer (0000) around the brush so it fits snuggly into the chamber. Then chuck the rod in a drill, cost the steel wool / brush with some WD40, CLP, 3 In 1 oil or any type of lubricate and polish out the inside of the shell chamber. This with help insure easier feeding but it will certainly help with failure to extract (FTE) in semi-auto and pump shotguns with some of the cheaper shells that expand and get stuck in the chamber.
@ReturningtoBasicsАй бұрын
Thanks for sharing that process. Sounds great.
@Neverdie242Ай бұрын
Wow! How much do you spend on special seed for your food plots?
@ReturningtoBasicsАй бұрын
I buy mom six bags at a time and one bag $8.99 for 50# will last about 7 days.
@nomobo1778Ай бұрын
Indian trail trees perhaps existed at one time, but these modern-day versions are simply accidents of nature.
@ReturningtoBasicsАй бұрын
Thanks for watching and commenting.
@rtm365bncАй бұрын
Thank you for video, it would be helpful to know which parts you actually polished?
@ReturningtoBasicsАй бұрын
I polished the bolt and everything that it could touch while traveling.
@DddddjsjdnfdndjdkАй бұрын
Dinner for dinner
@ReturningtoBasicsАй бұрын
Thanks for watching and commenting.
@victorAllen-xh5hkАй бұрын
An even easier way to get the old oil seals out is run a 3/8 rachechet extension through the assembly and place 4 to 5 dimes spread them apart under the seal cover the dimes and knock the extension on the ground seals out nothing damaged.
@ReturningtoBasicsАй бұрын
Thanks for the tip! I appreciate it.
@NorwayHikesTrailsАй бұрын
Nice video 😊
@ReturningtoBasicsАй бұрын
Thanks.
@twilightgardenspresentatio6384Ай бұрын
Natives would be better but doing something is usually better than doing nothing when it comes to habitat maintenance
@ReturningtoBasicsАй бұрын
Thanks for watching and commenting.
@richardphelps8827Ай бұрын
Hatfield guns pure garbage 🗑️!
@ReturningtoBasicsАй бұрын
They sure aren’t the quality we have come to enjoy from older guns manufactured by Remington, Browning, Savage Arms, or others.
@Neverdie242Ай бұрын
Enjoyed watching this one very much. Sorry about the loss of your friend. It's wonderful knowing we have the promise that you will see each other again, in the sweet by and by.
@ReturningtoBasicsАй бұрын
Thanks uncle.
@TheOzarkExplorerАй бұрын
Sorry to hear about losing your dear friend, Dr. Schaerer. Beautiful spot you have there. I hope you both got to spend time there together enjoying it.
@ReturningtoBasicsАй бұрын
John never visited our property but we did trout fish nearby. Thanks for your sincere condolences.
@NorwayHikesTrailsАй бұрын
Nice trail capture 👍
@ReturningtoBasicsАй бұрын
Thanks.
@FUNKINGFUNKERАй бұрын
It's crazy how those paper hornets nests can be HUGE
@ReturningtoBasicsАй бұрын
Yes. Interestingly, this one also disappeared shortly after making the video. Don’t know why either.
@CODMasterX-y7w4 күн бұрын
@@ReturningtoBasicsIT DISAPPEARED?!
@whiggy6976Ай бұрын
Its nonsense, they are found in every forest all over the world
@ReturningtoBasicsАй бұрын
Thanks for watching and commenting.
@kansasgardener5844Ай бұрын
I painted my tanks black some years ago. I used a paint for plastic and it has worn off everywhere there is contact between the tank and the cage and some on the tops.Green inside once again! I put 6 mil black plastic around the outside temporarily. This winter, when I drain my tanks I'm going to wrap them in painted wood. My home will serve as one of the 4 walls and I'm going to build a top also. I'm guessing a couple hundred dollars, but they will be shaded, and I'm painting the outside white to match my home. My roof is shingles as well and I use fish tank filter foam in the down pipe that goes into the tank. I simply wash it out after a rain. I also have a first flush and leaf eater.
@ReturningtoBasicsАй бұрын
Thanks for the info. Good luck.
@NorwayHikesTrails2 ай бұрын
Nice capture 😊
@ReturningtoBasics2 ай бұрын
Thanks for the compliment and for watching.
@sethcawthern32782 ай бұрын
Got 2 of em off eBay same number for $18 each. Great video I have a 1980 15 horse evinrude
@ReturningtoBasics2 ай бұрын
These old OMC motors are rugged. Thanks for commenting. Good luck with your motor.
@christopherlance36542 ай бұрын
It’s got a pecker
@BrandonPaci-tu6kz2 ай бұрын
If it taste good it should be fine. I wouldn’t worry about it. That part is the rhine. The meat is what you should be concerned about. The actual flesh of the fruit. It looks pretty good to me. Try a chunk. If it tastes off then toss it. But if it’s sweet then dig in 😋
@ReturningtoBasics2 ай бұрын
Thanks!
@georgedanhash2 ай бұрын
Don’t eat it because if you eat stuff and more on it, it’s really bad for you and you can get sick so if I were you, I would wear gloves get all of it, so it in the trash and get a new one
@ReturningtoBasics2 ай бұрын
We decided to pitch it. It wasn't worth $5 to gamble with our health. Thanks for your advice and for commenting.
@willynilly14452 ай бұрын
That pick trick really turned my day around. Thank you so much for sharing.
@ReturningtoBasics2 ай бұрын
Glad to help! Thanks for commenting.
@davidstair96572 ай бұрын
Dear Lord! Trees bend all the time in the forest! To ascribe this behaviour to Indians is pretty silly! Indians didn’t do stuff like that. Sounds like every bent tree is a potential for Indian magic!
@ReturningtoBasics2 ай бұрын
I respect your viewpoint, however, you apparently don’t know much about my native ancestors history. Thanks for watching and commenting.
@peterfong22412 ай бұрын
Blessed love to all, can you help me out with a couple antenna specification, I need specification for the 2,3,4,5 element yagi flat side antenna for 11 meter cb radio band, please an thanks bro, I always build my own antenna down here in Jamaica for years, thanks again bro, if you are going to help me, I will send you my WhatsApp number, bye now bro !!
@ReturningtoBasics2 ай бұрын
I know nothing about cb multi-element antennas. Have you searched KZfaq and Google for plans? That would be my approach.
@tomhism2 ай бұрын
I love my 1100
@ReturningtoBasics2 ай бұрын
Me too. It shoots so consistently. Thanks for watching and commenting.
@clarepagliazzo54942 ай бұрын
You saved me a lot of time and stress. thank you
@ReturningtoBasics2 ай бұрын
Glad it helped. Thanks for watching and commenting.
@Lucas_roblox7202 ай бұрын
Go pick it up if you want to :)
@ReturningtoBasics2 ай бұрын
Thanks for commenting.
@ClaytonBigsby012 ай бұрын
I think as someone who cuts White oak daily that's not 200 years old
@ReturningtoBasics2 ай бұрын
Thanks for your comment.
@kylewaggoner7142 ай бұрын
Thanks a million! Great video and very helpful. I really appreciate it. I'm following you now!
@ReturningtoBasics2 ай бұрын
Thanks for watching and sharing. Good luck with your tractor.
@misskitty85102 ай бұрын
This is the best idea of all of them! 👍
@ReturningtoBasics2 ай бұрын
Thanks. I appreciate you watching and commenting.
@mikeegan83042 ай бұрын
I just bought a T25 and this video was really helpful in getting prepared for when it gets delivered.
@ReturningtoBasics2 ай бұрын
I used mine today and love it. Good luck with yours.
@user-zb9ue4jr6u2 ай бұрын
hi, i have the same motor do you know the part number for the seals and where to get them? thank you
@ReturningtoBasics2 ай бұрын
You can get them from Boats.net or Crowley Marine by your model number.
@kennyalbert36922 ай бұрын
That top link really needs adjusting,lol I'm 2 years myself with the T25.A great little tractor