@@sertangunduz34 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@asanti762 күн бұрын
Just did this but also changed to a 12lb spring and man its very light and easy to rack now - MAC 9 DS 2011 (not Prodigy)
@MahlonTane2 күн бұрын
@@asanti76 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support! 💯🔥
@SANFERNANDOVALLEY8185 күн бұрын
Snap ya fangers lil jon😂😂😂
@MahlonTane5 күн бұрын
@@SANFERNANDOVALLEY818 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@badams601912 күн бұрын
What's type of grill? But looks really nice... Good job..😊
@MahlonTane12 күн бұрын
@@badams6019 Charbroil Oil-Less Deep Fryer unk
@chrisisho255712 күн бұрын
May I know how coding new fuel injectors for C250 2012 if new injectors has not not part number on it ?
@willmann3014 күн бұрын
Nice bro. U joints are a p.i.t.a.. Oil up the threads on the tool it helps. I inspect mine weekly and grease them monthly.
@MahlonTane14 күн бұрын
@@willmann30 sounds like a great system you got going monthly bro. Keep up the good work bro💯🔥
@willmann3014 күн бұрын
@@MahlonTane yessir. I worked at FleetPride from 2003-2016 then I did 3 months at Penske as a PM tech for 3months in 2012. Had to leave because we got pregnant it was considered a pre-existing condition 😡. So I went back to FleetPride til 2016. Then went to Freightliner dealer as a road test jockey for 1yr. So trucking is damn near my whole genome 🤣🤣.
@MahlonTane14 күн бұрын
@@willmann30 that's some time you've put in truckin bro. Thank you for your services 💯!
@kristofthibaud849114 күн бұрын
are there 2 purge valves on a 95 c280?
@MahlonTane14 күн бұрын
@@kristofthibaud8491 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. I thought there were only one for your question, but I could be wrong. You could check with the dealership. They should be able to give you a much more positive answer. We hope our content helped you out a little. We really appreciate your time and support!
@SherlockTowers15 күн бұрын
All sorts of lube was harmed in the making of this video
@willmann3024 күн бұрын
Bro I looooove my charbroil. That thing is amazing. I cook my chicken legs on it. And the turkey breasts be banging 😋😋. FYI...I just post 2 vids from DOT retaliation on my page. It's rediculous how they terrorize us.
@MahlonTane24 күн бұрын
@@willmann30 Saw it on my notifications but was tied up with work bro. Just got done checking both out. Heck if I could flash a light to a dollar and turn it into $100 forget working 🤣🤣🤣🤣. Martinez thought he had you in part 2. He didn't realize he was talking about himself 😭. The only thing they could have given you was a warning for the line. Not a red tag. Because it really wasn't a safety issue. Just dealt with it a couple months ago. But I'm sure they'll say something about the throw of your adjuster, at least that's what it seems like. Torres was having too much fun rolling around on that creeper on the side of the truck bro 🤣🤣🤣. Great content bro 💯🔥
@willmann3014 күн бұрын
@@MahlonTane😂😂😂 yeah bro we catching hell up here in CT. They thirsty AF for revenue. But I stood on business with my 5th amendment. Putting mu OOS service that was petty AF. I'm fighting it fosho. That supervisor is a POS bro. But people think trucking is gravy 🤦🏾♂️. Preciate you bro.
@MahlonTane14 күн бұрын
@@willmann30 Truckin ain't what it used to be bro 💯
@slotcarfan24 күн бұрын
Would help if you mentioned the bullet weight a little more clearly and frquently.
@MahlonTane24 күн бұрын
@@slotcarfan Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. These are 180 x-treme. You can check out the load development for them in our catalog. We hope our content helped you out a little. We really appreciate your time and support!
@dmc348927 күн бұрын
You the man! Thank you for putting in the time to make this video. I really appreciated it Brother as you saved me a bunch of time and frustration, Peace! - Drew
@MahlonTane27 күн бұрын
@@dmc3489 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@dmc348927 күн бұрын
@@MahlonTane Shoot, it;s the least I can do, thanks for the reminder. I'll take a spin and see what you got, BTW squirrels aren't our friends.
@reloadshootrepeat331529 күн бұрын
seriously others have joked about it, but you are using way too much lubricant for a 1911, with the amount of oil you used its ready to go into storage until the next world war. you only need to lube the areas with a small amount where there is metal on metal contact, and no I dont need a reply from you asking me to like and subscribe if I havent already.
@MahlonTane29 күн бұрын
@@reloadshootrepeat3315 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. 🤣 Feel free to lube your tool whichever or however you like. Our 2011 loves ❤ oil baths. We hope our content helped you out a little. We really appreciate your time and support!
@eddieassali4785Ай бұрын
Good job
@MahlonTane26 күн бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@ClaytonSmith-tr6mdАй бұрын
what pistol is that is it a TP9SFX?
@MahlonTaneАй бұрын
@@ClaytonSmith-tr6md Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your time and support! It's the rival. We hope our content helped you out a little.
@bryanritts213Ай бұрын
Could you not just buy bushing replacement for both ends?
@MahlonTaneАй бұрын
@@bryanritts213 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We tried to get bushings first, but could not find it. Luckily the dealership had one that's plug and play already. It sure made everything much quicker. And the truck went back to work. We hope our content helped you out a little.
@user-uh1vq3bm2vАй бұрын
Man I’m doing this today but I have to install the whole driveshaft that’s in front of the one your in. The thing is that mf is heavy af. I’ll find a way to put in.
@MahlonTaneАй бұрын
@@user-uh1vq3bm2v Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. Yes, you definitely have to disconnect your drive shaft from transmission. Maybe you can use some racheting straps to hold up part of the drive shaft; and help you bare some of the weight. If you are replacing the carrier bearing this is our complete process. Always exercise safety first.
@jfishingwi5659Ай бұрын
Born and raised Wisconsin boy here coming to Louisiana for a guided gator hunt. Beyond excited and this video has me dying! 🤣
@MahlonTaneАй бұрын
@@jfishingwi5659 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your time and support!
@jfishingwi5659Ай бұрын
🤣🤣🤣
@gregoriojimenez9530Ай бұрын
Gracias muy bien esplicado😅
@MahlonTaneАй бұрын
@@gregoriojimenez9530 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@sinkutwirelessАй бұрын
WARNING!!!!!!! Not sure how high you had the passenger side but I had mine fairly high and it poured out a quart of oil all over the floor. Have an oil pan ready!!!
@MahlonTaneАй бұрын
@@sinkutwireless Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. Not sure how high "fairly high" you had yours up or if you only had the passenger side up. Either way, you would still have to check and make sure you filled it up to the correct oil level. We hope our content helped you out a little. We really appreciate your time and support!
@omarfarooqhotak7841Ай бұрын
👏👏👏🙌🙌🙌👍
@MahlonTaneАй бұрын
@@omarfarooqhotak7841 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@roymoore29442 ай бұрын
great content. talented mechanic as well!!!!
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@user-kr8tp3ko8z2 ай бұрын
nice tutorial but your lcd backlight have problem, one of the columns have failed and its very common issue, one of the wires in the ribbon gets pinched by screw and after years of use gets broken
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@blackmillerb2 ай бұрын
Great video definitely made easy to understand!
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@petergimbal30322 ай бұрын
Great video all around. I did this job on a 2004 C240 wagon. One thing, do you have any advice or details on installing the "Y" shaped breather hose onto the section below the MAF sensor? Thank you.
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. Check the description of the video and see if there's a continuation link; that might show how we replaced the "Y" hose. We show it in this video close to the end of the content. Here's the link kzfaq.info/get/bejne/hNR_YN1kncm0j6c.htmlsi=yPG3lh6Kx35V_UeF .We got ours from FCP EURO. We hope our content helped you out a little. We really appreciate your time and support!
@michaelcarroll22172 ай бұрын
Part Number: 1120180682 is the crankcase breather hose that goes to the MAF but it does not come in the breather hose kit that you can order when replacing both valve cover gaskets .FYI 😎.
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@martinwarren50262 ай бұрын
I want to thank the guy that showed me how to take that rod out. Thank u very much u saved me from losing a load in a time when dollars r tight. Very tight!
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@christopherstanfield77552 ай бұрын
Im ordering one for my prodigy DS. Great demonstration on the installation of the instalment of the guiderod. If im ever in your neighborhood ill just follow the oil slick to you and say whats up..
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We will hold you to your word. And hope to get a range day in with you one day. We hope our content helped you out a little. We really appreciate your time and support!
@chainbenwa27132 ай бұрын
Longshot is pretty picky about primers. If you’re using small primer, try some small rifle primers or small pistol magnum especially if it’s humid when you reload and your standard deviation starts to suck or your getting underpower loads. I use that combo with 45+p and it’s legit. Good accuracy btw hodgdon load data book seems low to me. With 200 grain in 45 acp im using 9.2 grains longshot with small rifle primers to get 1120 fps lol.. longshot doesn’t really start to clean up and work well in 45acp until im way off book data
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We believe longshot works pretty well for our application with our 10mm. It's accurate enough and has enough umph. It's also very versatile and not caliber specific. As long as one knows what they're doing. We hope our content helped you out a little. We really appreciate your time and support!
@calebfenn4822 ай бұрын
When you were putting the new cv axle in what were you hitting it with to get it all the way in the transmission
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We were using an orange mallet from harbor freight. I believe it's either 4 or 8 lbs. Plastic coated. We hope our content helped you out a little. We really appreciate your time and support!
@hittz83312 ай бұрын
Dude handling business! Thanks Much Bro
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@eddiearya14122 ай бұрын
First get your thoughts together before making a video...
@MahlonTane2 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@ashleyren223 ай бұрын
Do you need to disconnect negative battery terminal before doing this work?
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really didn't have to. Although, for safety reasons. We highly recommend disconnecting both positive and negative terminals. Which will be safer during changing electrical components and allowing reset at the same time. We hope our content helped you out a little. We really appreciate your time and support!
@burrco30863 ай бұрын
I couldn't figure it out either. And I'm a shade tree mechanic. Thanks man. Subscribed!!
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. We hope our content helped you out a little. We really appreciate your time and support!
@pedal2dametal6863 ай бұрын
Great video quality and as great how to
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. You can also click on the link in the description of each video for "Part 2 or Continuation" of the similar content. We hope our content helped you out a little. We really appreciate your time and support!
@wood3673 ай бұрын
Thanks for sharing. Even when I use the wrench it just spins. I think I probably over torqued it and stripped it. I cant get the bolt out now. Any suggestions?
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. Have you tried holding it with a small pipe wrench? If that doesn't work, you can try using vise grips. We hope our content helped you out a little. We really appreciate your time and support!
@DangerousWomann3 ай бұрын
please make a video on how to hide a body
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@jonatdiaz6953 ай бұрын
What c.o.l???…hp?
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. C.O.L. is the cartridge overall length. We hope our content helped you out a little. We really appreciate your time and support!
@willmann303 ай бұрын
Yes bro. That check valve can cause huge problems. It's definitely a maintenance item. I had the same issue on my 12.7. Excellent content bro 👍🏾👍🏾
@MahlonTane3 ай бұрын
Appreciate it bro! We're glad you like the content. Be safe out there!
@willmann303 ай бұрын
@@MahlonTane That's big TENFOE brutha 💪🏾👍🏾🇺🇲. You too. The market is purging out the weak. Only the strong survive.
@HerbertAtkinson3 ай бұрын
How do you know if the vicegrips are to be facing near the bottom or top? I seen a other video domeone shows grips are up against ceiling?
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. It would depend which side you would be working on. Left side should be bottom due to the thread direction to be thighed. We hope our content helped you out a little. We really appreciate your time and support!
@MBDeke3 ай бұрын
First!!! Thank you for creating this video, I love watching everyone's own ideas on how to smoke brisket. Smoking a brisket is something i haven't done yet but I am collecting as much information as possible to prepare for my first ever smoked brisket. Yours looked mighty delicious and loaded with plenty of that beautiful dark bark and also very tender as well. But most that i have seen waited a bit longer before cutting into it. With steak it's the same way. I've learned way, way after decades of cooking pan-seared steak that - first, it must rest at least 10 minutes before cutting into or else it will bleed out all the, myoglobin (which most folks confuse as blood but it's actually a protein that delivers oxygen to the animal's muscle) that will make unpleasantly dry. Same thing with brisket. I see videos where the cooks will let it rest minimum of about 4 hours before cutting, however though, the brisket is kept into a food warmer for four hours sitting at 160 degrees in the meantime. Awesome job with a very interesting smoking/charring method you performed to cooking it.
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. When people allow brisket to sit in a warmer it's still cooking. Kinda like slapping it inside an oven to tenderize a bit more or just keep moisture. We allowed our brisket to rest out for the most part due to what you've stated. But also cause it's very hot. We are not serving our brisket for a function or special events. Where there's no telling, how long it will take for it to sell. We simply just want some brisket. Go ahead and take that leap! Don't let others slow you down from your passion. Remember, it's just brisket. You can always cook another one. Although, you seem to have it all down already. Just don't make it complicated. And cook your brisket off! We hope our content helped you out a little. We really appreciate your time and support! P.S. Our brisket does not last 20-30 minutes after being sliced. If we have some leftovers sit longer than that; it's cause the Mrs. is being selfish. And she will put it up and guard it. ijs
@terrencetaylor81963 ай бұрын
Give thanks, bro. Just what I have been looking for.
@MahlonTane3 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@detailintheshadow3 ай бұрын
Big Ole Turbo!!!!
@MahlonTane3 ай бұрын
Yes indeed bro! It's got some weight to it
@detailintheshadow3 ай бұрын
Got em’ smoking!!!
@MahlonTane3 ай бұрын
Yes sir!! 🔥💯
@gardenoftwitty3 ай бұрын
Ooooo weekend!!! That's a bog Ole BRISKET!!!!
@MahlonTane3 ай бұрын
Not big enough like they used to have back in the days. We just sliced it about 20-30 min ago. And it's almost gone bro 😢
@gardenoftwitty3 ай бұрын
@@MahlonTane Man back n the Dayyy! Almost gone speaks volumes. Seeing her slide off th foil just jigglinwas the best shot I seen for while frfr.
@MahlonTane3 ай бұрын
@@gardenoftwitty it's not Jello 😂
@gardenoftwitty3 ай бұрын
Lol😅@@MahlonTane
@OBZ744 ай бұрын
Great video! I just ordered one. Did you also replace the firing pin spring that came with the Wolff spring?
@MahlonTane4 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. Not in this one. But we have trIed it. Works really great. I believe we have content in our catalog about it. We hope our content helped you out a little. We really appreciate your time and support!
@yepimcool22994 ай бұрын
Any recommendations on removing the tone ring for the speed sensor, one I had was frozen to the shaft tried prying and everything else
@MahlonTane4 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. Have you tried using a scribe? We hope our content helped you out a little. We really appreciate your time and support!
@DENS9734 ай бұрын
Some words of wisdom. Remove the fuel pump fuse crack her up about 10 sec. to remove any gas in the rail etc.
@MahlonTane4 ай бұрын
Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!
@kfelix29344 ай бұрын
The frozen Turkey breats in my freezer came to life when they heard put-putts from your Turkey calls. You do need more practice. Word of advice, windy days are horrible for turkey hunting, You can't hear any thing, and the same for the turkeys. Keep in mind the turkey is a formidable prey. The old saying; " To a deer, every man looks like a tree trunk, but to a turkey, every tree stump looks like a man"
@MahlonTane4 ай бұрын
We surely appreciate that info kinfolk! Maybe one day you can help us with our turkey call. It's much needed. Those falcons almost got it that day cause you kept saying they were flying turkey 😂