take back to kohl's l will be doing in couple days ,,,, nothing attracted to it, lil bees 15" away onnhum bird feeder , no wirkee!
@CarolinaCowboys15 минут бұрын
It doesn't attract regular bees, it's mainly for wasps
@brankomijatovic95812 күн бұрын
Thank you indeed for this video - I hope it will solve the same exact problem with my Lexus Rx450h. One remark regarding adding freon - I am not sure if you did. The bottle must be upside down, in order to liquid phase of Freon goes down. Once again thank you for these videos - Branko-Germany
@CarolinaCowboys2 күн бұрын
I was following the label, it says to leave it up, and then turn it over every 30 seconds or so to let the oil go in.
@designerraptour3 күн бұрын
I have the iRigStream Pro and I just got the X8, I’m going to try that setup!
@CarolinaCowboys2 күн бұрын
ya it's working good!
@ftlbaby3 күн бұрын
That door removal looks almost exactly the same as my 2005 RX330 with base stereo, which is a Pioneer cassette / 6 CD changer (no bluetooth!) and separate amp behind the rear seats. Mine does not have the screw behind the mirror controls, only the other two. The screw behind the handle goes into the metal bracket. The 6x9s look the same. I just upgraded to an Infinity Reference 6530CX 6.5" component woofer (not two way) and it is a massive upgrade (especially the bass) even though it sounds like the factory eq is doing something wacky. Now, I am about to go crazy with sound dampening and Focal 165AC 6.5" two ways in the rear! I wish I could easily add a sub but I still make tape mixes so I can't replace the head unit and with the amp being separate it's too involved ATM. I may still do it... Oh yeah, since people seem interested in volume: with the original speakers my low listening volume was around 11, medium 22, high 33, and super high 44. Rarely went above 50. Now 22 is low and 33 is medium, etc. Still not going to max. Mostly listen to CDs and mix tapes from jazz and classical to electronic and metal with lots of diversions to rap ; )
@fjlbzeutube3 күн бұрын
There is a light in the visor when you slide the mirror
@CarolinaCowboysКүн бұрын
Your right!
@michaelmallon63465 күн бұрын
Sorry to hear that about your 2021 Rx . That is unacceptable for a certified .I just purchased a 2021 RX350 L 12,500 k miles .The car looks like a brand new car. I cant find a flaw in or out side of the car. The only concern was a tire pressure monitor was not working and one of the two keys were defective. They will take care of it Monday. Regarding your Red Mica color RX. Its probably a Good that they have the Ceramic coating on the paint. i also have red Mica on my 2013 ES 350 and have to paint the hood ,roof and trunk because of sun (Florida )destroying the clear coat .
@CarolinaCowboys4 күн бұрын
Check out the video series for the rest of the story! Yeah I ithink the whole ceramic coating thing is legit, I don't think it's worth $1500 to install it though.
@tayshow56426 күн бұрын
How’s the part holding up since then?
@CarolinaCowboys4 күн бұрын
The hatch struts are holding up just fine. Now I have a problem where the motor is wearing out and not able to pull down the hatch.
@lauriekh90726 күн бұрын
I’ve been looking for a Lexus preowned. Thank you for this video !! And I subscribed!!!
@CarolinaCowboys4 күн бұрын
Awesome! Thank you!
@steelparade12 күн бұрын
Thanks!
@CarolinaCowboys10 күн бұрын
No problem!
@MABX9416 күн бұрын
I have a 2013 rx350. I was thinking about doing the component version of these speakers instead of the coaxial ones like you did. Because I want to replace the top tweeters also. What do you think about it?
@CarolinaCowboys14 күн бұрын
Yeah that could work if you are replacing more speakers with each individual component speaker, I was trying to get the most sound benefit for the least amount of money, but your plan would cost more and take more work, but ultimately sound better.
@Oivey200017 күн бұрын
I had a 2003, 2010 & a 2016 which I’m still driving. Loved my 2010. Sadly, Lexus dropped the V6 for a turbo 4. This will probably be my last RX unless I buy used
@CarolinaCowboys14 күн бұрын
I will not buy a turbo 4 or anything with CVT
@TheRexPerkins17 күн бұрын
3rd gen rx350 really is a perfect vehcle
@CarolinaCowboys14 күн бұрын
It's so good!
@Roy-cw7kn17 күн бұрын
Thanks
@CarolinaCowboys14 күн бұрын
Welcome
@JamesAutoDude18 күн бұрын
We need one for the 2013-2015 because those years were a bit different on their own
@CarolinaCowboys14 күн бұрын
2010-2015 are all basically the same with very minor differences, 2013 there was a minor refresh that changed things like the headlights, grill, wheels, navigation system went from the force feedback to touch. But the major redesign was in 2016
@axios7618 күн бұрын
Never clean anything with brake cleaner on the brake caliper and caliper carrier bracket, before installation. Do not also wire brush the hub and do not put anti-seize on it, before putting the new rotor. That will ensure a good welding by rust next time you try to remove the disk. Also I'd loved to see where the jackstand was put for the forward brake job.
@CarolinaCowboys18 күн бұрын
Good points!
@axios7618 күн бұрын
@CarolinaCowboys 👍Seriously, now, thank you for the video and the effort!
@Northunderland20 күн бұрын
I have purchased CPO cars at the dealer and have taken them home and found some issues. It's all a crap shoot. As long as you have a warranty, that is all that matters at the end of the day. I have purchased 6 cars with warranties and have used every warranty for one thing or another. Parts and labor costs are through the roof and it's better to be safe than sorry. You have nothing to feel bad about. Lexus totally protects its reputation and will do just about anything to avoid tarnishing it. If you bring issues to their attention, they will more than likely honor it. Nice car by the way.
@CarolinaCowboys18 күн бұрын
Yeah they definitely stepped in to fix it! Did you see the later videos?
@samnnamani20 күн бұрын
This is amazing new. So happy for the outcome. This is reason why Lexus will always stand out.
@CarolinaCowboys18 күн бұрын
Yeah, exactly!
@benjaminmonterosa234921 күн бұрын
My question is how did you come up to the conclusion that this part was the problem of your a/c not working
@CarolinaCowboys18 күн бұрын
Scouring the internet forums and then taking a $650 gamble. :-)
@uabir833821 күн бұрын
Used it, didn't work. Returned it thanks to Amazon who takes EVERYTHING back.
@CarolinaCowboys18 күн бұрын
No improvement at all?
@sobeit116623 күн бұрын
I've had a small chip in my windshield for several years. I may try repairing on my own after watching your video. Thank you for the detailed instructions, it's helpful and boosts my confidence in trying the repair.
@CarolinaCowboys23 күн бұрын
Definitely worth the try!
@Alex_CFB2523 күн бұрын
Thank you for the video! I need to use this next time!
@CarolinaCowboys23 күн бұрын
Glad it was helpful!
@pabloramirez462623 күн бұрын
Good content very informative.
@CarolinaCowboys23 күн бұрын
Thanks, this battery has now lasted 4 years!
@LiquidSSSnake24 күн бұрын
I found the febest on Amazon and eBay, I feel like it should have quality bearings that generic offerings. Pulley Idler Kit Febest 0187-GSU45 Oem 16620-31031
@CarolinaCowboys23 күн бұрын
I've never heard of them but it's still working at least
@MrMetsfann28 күн бұрын
Have you also done the license plate lights? Presume these are the same as the interior lights.
@CarolinaCowboys28 күн бұрын
I've never thought about that! You might have found the mysterious 10th bulb!
@hp001t28 күн бұрын
I came across your video while researching about Lexus Certified Preowned cars and ordering online. Thank you for making both videos. I’m glad to hear that everything worked out in the end for you! I am thinking about ordering an RX 350 online since there are no Lexus dealers near my area. However, I am having second thoughts because I don’t want to go through a hassle like you did. In your first video, you mentioned that you were planning to make a video about how to order a car online. Did you make that video? I’d still like to watch it. Did you have to find a car transportation company yourself? Just curious, what was the mileage of the car at the time you bought it? Thank you!!
@CarolinaCowboys28 күн бұрын
Those are great points, I started making the how to buy a car online video but there were so many people hating on me for buying a car online I held off. :-) There are definitely risks, but I may in fact make the video anyway because I would do it a 3rd time and just apply everything I've learned. So maybe I have more to say on that. Both cars I bought online had 62K miles.
@BrandonHudrlikАй бұрын
I have the same machine and the filament seems to have worn a notch in the hole that the filament inters the extruder housing. I think that the filament is now getting stuck a bit and causing under extrusion. Do you have a fix for that?
@CarolinaCowboysАй бұрын
Yeah I could see that happening, I would suggest either installing a PTFE hose the filament can travel through, or 3d print a guide that keeps the filament more vertical so it doesn't get pulled.
@markkujantunen8298Ай бұрын
You don't buy the Lexus RX because it's a fun car. You buy it because it's a luxurious, quiet, spacious and reliable vehicle for hauling people and stuff from place A to place B.
@CarolinaCowboysАй бұрын
True!
@munkeepilotАй бұрын
I sure hope you were able to save the Blue Bell.
@CarolinaCowboysАй бұрын
Sure did!
@skytech168Ай бұрын
Great comparison! Just relocating from Australia to Indonesia and I am exactly in torn between 2013 RX 350 with 80K kms and 2020 Odyssey with 40K kms.
@CarolinaCowboysАй бұрын
I'd go for the newer Odyssey for sure!
@armineharutyunyan9481Ай бұрын
My fridge shows 1F E also and there is no ice build up because I don’t have ice or water coming out of it nothing is working on the control panel and I removed like you showed and replaced it back on but the fan didn’t turn on .What can I do? Also I turned the entire fridge off for over 8 hours and was working fine the entire day then the next morning same issue.
@CarolinaCowboysАй бұрын
The 1FE error is specific to ICE buildup. If you turned off the fridge, you are going to want to completely empty it out and leave all the doors open. But that will only guarantee clear the error. The problem could be caused by the door seals letting in air, or the fan is not working. You could test that fan to see if it needs to be replaced.
@armineharutyunyan9481Ай бұрын
@@CarolinaCowboys we found out that the fan was broken so it had to be replaced.
@armineharutyunyan9481Ай бұрын
My fridge shows 1F E also and there is no ice build up because I don’t have ice or water coming out of it nothing is working on the control panel and I removed like you showed and replaced it back on but the fan didn’t turn on. What can I do? Also I turned the entire fridge off for over 8 hours and was working fine the entire day then the next morning same issue.
@CarolinaCowboysАй бұрын
The 1FE error is specific to ICE buildup. If you turned off the fridge, you are going to want to completely empty it out and leave all the doors open. But that will only guarantee clear the error. The problem could be caused by the door seals letting in air, or the fan is not working. You could test that fan to see if it needs to be replaced.
@armineharutyunyan9481Ай бұрын
@@CarolinaCowboys thank you for your reply the fan was broken and had to be replaced
@netman88Ай бұрын
Excellent video 🎉, thanks for sharing
@CarolinaCowboysАй бұрын
Glad you liked it!
@andreapiro7098Ай бұрын
Thanks
@CarolinaCowboysАй бұрын
No prob!
@kvn.nguyenАй бұрын
Hey! Wanted to ask. Are your lights still functional after this long? Just worried I gotta pop all these out within a year due to flickering or something
@CarolinaCowboysАй бұрын
Yep they're all still working!
@rhamerecarter1660Ай бұрын
3:36
@CarolinaCowboysАй бұрын
Who's there?
@terryhenson3350Ай бұрын
La di dah
@CarolinaCowboysАй бұрын
Yeah, it was an interesting lesson
@terryhenson3350Ай бұрын
Your kids are lucky to get such nice cars.
@CarolinaCowboysАй бұрын
Well a 14yr old car isn't that nice, but it runs good.
@RezaShaheedKhanАй бұрын
Dude! So Awesome! Thank you. I just did the same for my fridge and it solved the issue. Mine had a second ice maker in the freezer and so there was a small plastic shroud that I needed to unscrew. It had two small philips head screws and it was was a little tricky to remove. Then I removed the entire back panel, run the hair dryer on the Ice Maker fan and it started spinning freely. As soon as I plugged in the last blue plug on the panel the error went away. Took all of 15 minutes. Thank you so much!!
@CarolinaCowboysАй бұрын
Awesome! Glad it helped
@aarontoaletАй бұрын
Is the sound system better in the newer models? (2017-2019)
@CarolinaCowboysАй бұрын
They're about the same, I made videos upgrading the sound in both so you can see the difference.
@danielfield7986Ай бұрын
The tech who looked over it just didn't take much time at all I specting it. It's not that the dealer isn't honest he just got a lazy tech that looked over it. And that wheel lock is not a Lexus wheel lock, it's aftermarket, that's why there was no key. They previous owner put that on and didn't leave the key
@CarolinaCowboysАй бұрын
Yeah, I learned that. Thankfully the dealer paid to have it cut off.
@jfarhat8607Ай бұрын
Im having the same climate system error message and the ac is blowing hot air. Does the message alway mean it the amplifier ? The part is discomtinued here in Canada.
@CarolinaCowboysАй бұрын
I put a link to where I bought it from, it is sold at various places in the US. First thing to try is to go into the HVAC controls and select the A/C to turn it off, then select the A/C again to turn it on, this is a workaround to get it working.
@jfarhat8607Ай бұрын
@@CarolinaCowboysOk mine never work. Even if i turned it on and off multiple time..the ac in navigation screen is always flashing when i push it on
@CarolinaCowboysАй бұрын
@@jfarhat8607 Sounds like something else might be going on. Have you tried unhooking the battery to reset the computer?
@CarolinaCowboysАй бұрын
@@jfarhat8607 That sounds like something else going on, i'm sorry can't help
@EmilyWhite-WinterАй бұрын
I was having the same problem, so I ordered a replacement board and installed it only to get an error message - E4.
@CarolinaCowboysАй бұрын
Were you getting the E4 message before changing the board? The E4 refers to the steamer, check to make sure you plugged it in, or try to unplug and plug back in. Also, check the cables to the steamer, you hopefully just have a cable issue, otherwise something happened to the steamer.
@EmilyWhite-Winter27 күн бұрын
@@CarolinaCowboys I wasn't getting an error message before changing the board. I ended up putting the old board back and no longer got the message.
@CarolinaCowboys27 күн бұрын
@@EmilyWhite-Winter Sounds like the new board is either the wrong board or they sold you a faulty board
@BatkoMahnoАй бұрын
I don't know what is bad about sound system. Go to settings, sound - Trible -Max, Mid +1or2c Bass leave the same or maybe +1. Enjoy.
@BatkoMahnoАй бұрын
And don't forget to keep surround sound on.
@CarolinaCowboysАй бұрын
Which model are you working with? You may already have the premium system.
@mwandawirohilton6258Ай бұрын
Can it be operated without temperature sensor
@CarolinaCowboysАй бұрын
Only if you decide to bypass it(hardware it)
@flight1513Ай бұрын
Wow. Definitely should not be a L/Certified vehicle. :(
@CarolinaCowboysАй бұрын
In the end they got me to 100%
@rickjamieson6605Ай бұрын
Was the side that broke the most used side of the two?
@CarolinaCowboysАй бұрын
No, it was the non-used side
@rob9147Ай бұрын
Good video. Air shocks aren't made for guys who weigh 200 lbs. Don't forget the bike is already heavy,then adding the rider,more weight, suspension will compress more and bottom out easier,wear faster. Just sayin eh.
@CarolinaCowboysАй бұрын
There's an app you can download where you enter your weight and it gives you the optimal air pressure. It's been a good unit.
@rob9147Ай бұрын
@@CarolinaCowboys ...and? Still a lot of weight!
@Kennykoo65Ай бұрын
Excellent video.
@CarolinaCowboysАй бұрын
Thank you very much!
@KH-3414Ай бұрын
I don't have a sauda gun, so can use just the electrical tape? Thank you