And here I was ready to cut the wires but the colors didn’t match so my first thought was KZfaq to the rescue Lol. Thank you for taking the time on the video. Great explanation!
@historyguy7712 күн бұрын
I have been unable to do this. do i need a master key? i just have two keys that both only work for the immobilized
@IOCaneTech12 күн бұрын
Are you trying to do a smart key or? Are you trying to do the wireless door locks?
@historyguy7712 күн бұрын
@@IOCaneTech Just the wireless door locks. I've tried doing it but it doesn't work every time I try it
@IOCaneTech12 күн бұрын
@@historyguy77 There is another menu item there to test if the remote signal is detected at all. It's been many years since I got in there but there is a test that shows ANY signal so you can test the remote.
@historyguy7712 күн бұрын
@@IOCaneTechI guess I should have mentioned, 2008 Prius. it has push to start. both keys work to turn the car on, but neither have the ability to wirelessly remote entry or sks. I've been able to manually turn on the security key light, but not test to see if it receives remote signals
@IOCaneTech12 күн бұрын
@@historyguy77 Yes, push to start, so Smart key. This procedure will not work with Smart Keys. :(
@devioushernandez116615 күн бұрын
So did the same replacement and now mine idels high any tips on what i did wrong
@IOCaneTech2 күн бұрын
I mean the computer controls the idle, so it sounds like you may have other issues? Or you have the fuel saver / auto idle down off?
@carlcannedy266917 күн бұрын
Many Many thanks. I have a Kopor generator with the same engine that you have in your Honda EU2000i . And i couldn't find out what kind of engine it had. And thanks again! Now i can fix mine!
@JP-od1nrАй бұрын
One of the best TS instructional videos available - thanks!
@mikeknapick4914Ай бұрын
This worked fabulously on my two machines.
@dylanshaughnessy7844Ай бұрын
Anyone find a deeper fuse box cover with the fuse legend for 2021 Highlander XSE?
@bonifotoАй бұрын
Worked like a charm, thanks for sharing and posting!
@IOCaneTechАй бұрын
Love to hear that!! :)
@bonifotoАй бұрын
@@IOCaneTech you'll appreciate what happened. I have two Hondas so we can run in parallel. One had a bad carburetor that was clogged, the other runs great. Not paying attention I replaced the good carburetor . I didn't realize my mistake until I was finishing up. So I had to use the carburetor I had just removed to replace the bad one in the other generator. Both generators are now running and your tutorial worked so well it worked for me twice....hahahahah
@lindapfister2484Ай бұрын
How do I download this
@IOCaneTechАй бұрын
Download what? It's a webpage you navigate to. Then click "Listen Now" and if "Continuous Playback" is Blue and "Auto Play New Calls" is Blue, You should begin seeing, and hearing traffic shortly.
@delbuxton20922 ай бұрын
Works as described. The hardest part was getting the fuse cover off and a fuse out.
@chrisclayton12482 ай бұрын
Just installed today and works great! Had to wait until my wife was out of town so she wouldn’t see me pulling panels on her beloved Toyota. Hated that feature!
@IOCaneTech2 ай бұрын
Love to hear it working well for you :)
@albertdeitering28462 ай бұрын
That stop start system on my 2018 Highlander drove my nuts to the point of considering trading in the car. Your device works perfictly, easy to instll. Thank you very much.
@IOCaneTech2 ай бұрын
Stories like that are what keep us going :) Thanks for sharing.
@k4piii3 ай бұрын
So the utility is in main body, that was my problem lol, thank you.
@dougfinlayson64023 ай бұрын
Got me mine back up and running in 30 minutes. Scavenging the solenoid of the old one saved time and worked great. Of course beware of that springy thingy. Thanks!
@Rod833 ай бұрын
Where did you buy it how they call it?
@IOCaneTech3 ай бұрын
Link is in the description www.ebay.com/itm/122906497591
@marknye51.thefixitguy3 ай бұрын
the throttle motor on the old carb does not work with eco on or off on new carb. is there a way to adapt the new throttle motor to the harness ?
@IOCaneTech3 ай бұрын
Define does "not work"? The generator will not run at all on it's own without that Servo motor working correctly.
@PopcornH33 ай бұрын
I think my servo is bad how do I test it ?
@IOCaneTech3 ай бұрын
And what makes you think that?
@PopcornH33 ай бұрын
@@IOCaneTech I replaced the carb with a new one and switched my servo to the old one because I don't have the square plug but I still have surging and no power .. if I stick a wood stick in where the servo action is and jam it wide open it runs fine just high and I assume burns more gas.. maybe it's not the servo but I just had it all apart again this morning .. and put back together ... When I get home 🏠 m doing another full teardown might even make a video on my channel for help
@IOCaneTech3 ай бұрын
@@PopcornH3 Yeah if you have surging and no power I would suspect the Servo NOT is the issue. Sounds like the inverter or power generator are toast, and thus no power to the servo.
@mosconioni45234 ай бұрын
Will this work on a 1999 Toyota Rav4? Mine ECT function stopped working and doesn't light up on the gauge cluster and I'm not sure why, but even after replacing the button it still doesnt work, so I'm trying to figure out if this method bypasses the button to provide it power? Or is my issue on the other end which i assume would be some ECU module or something? I been trying to find if there is a fuse related to the button to see if it is blown, but not sure what it would be.
@IOCaneTech4 ай бұрын
NO, this will NOT work on a '99 RAV sorry.
@mosconioni45234 ай бұрын
@@IOCaneTech thanks for your quick response. Any ideas for troubleshooting?
@IOCaneTech4 ай бұрын
@@mosconioni4523 I honestly have no idea on something that old :( Sorry.
@sibarrette83745 ай бұрын
Can this be used on a 2019 Highlander hybrid as well?
@IOCaneTech5 ай бұрын
No, it can not.
@juliorodriguez88915 ай бұрын
Thanks for the video, complete guide for replace carburator en eu2200i Honda help me step by step do the work by my own. And save me money !!
@chuckC44445 ай бұрын
Ordered mine today! My only disappointment is that is that I wasn't able to find this sooner... I have searched the internet for exactly this. I can't wait to put this on my 2023 1794. Thanks for making this! UPDATE: Installed on my Tundra Saturday. It was pretty easy; I suggest running the coat hanger from the driver's side to the passenger side. I tried both ways and it worked much easier for me from the driver's side. Also, if you have a kid handy, they can get to the fuse box way easier than a 52-year-old man in... um average shape.
@everydaybladesinc5 ай бұрын
Thank you very much. Third helped a ton. You’re the man.
@sonicpower6876 ай бұрын
So all the carbs for sale online have the wrong plug on them. No one sells one with the right plug? Wtf?
@IOCaneTech6 ай бұрын
I haven't found one with the right connection. YMMV
@fatbiker98156 ай бұрын
It's funny that I stumbled across this video because I did a small rebuild on my carb (main jet, emulsion tube and pilot jet) but the bowl was wrecked with rust patches and junk build up. I kept reading that the amazon carbs wouldn't match the wiring and I wondered if you could just reuse your old servo. I guess you answered that for me. Great video, clear, in focus and to the point. Great job and thanks!!!
@wildncrazyguytv6 ай бұрын
Who’s the man? You’re the man!! Thank you sir!!!
@user-ci7tz1fb2v6 ай бұрын
Awesome......
@novatech-lc9fm6 ай бұрын
Awesome unit there funman1steve........thank you for your expertise........
@travissheehan60827 ай бұрын
Thanks, finally got around to installing your product today. Good video and product seems to work perfectly. Now gotta master this 3d printing to put a fuse cover back on 😂
@RichardMyers137 ай бұрын
Thank you sir! Very good video!
@gregdaly43657 ай бұрын
It’s this legal?
@IOCaneTech7 ай бұрын
Not sure why it wouldn't be
@georgek.98538 ай бұрын
For starter fluid, I see you used Valvoline Extra Strength. Does the brand matter?
@IOCaneTech8 ай бұрын
Not at all. Any starting fluid spray will do :)
@walter.bellini8 ай бұрын
Thank you for the video Looks like you had a nice GS300/400
@user-wv8hp3tz3o8 ай бұрын
after installing, priming with starter fluid, motor started at higher rpm, gas poured out bowl tube and engine stalls. what did i do wrong?
@IOCaneTech8 ай бұрын
Sounds like the float in the carb is stuck, I'd return it and get another one that one sounds defective.
@user-wv8hp3tz3o8 ай бұрын
Thanks. Ill do that.@@IOCaneTech
@user-wv8hp3tz3o8 ай бұрын
You were right! exchanged carg, runs like a champ! thanks so much!
@IOCaneTech8 ай бұрын
@@user-wv8hp3tz3o EXCELLENT!!!!!
@davidschaum26258 ай бұрын
I guess I'm OCD but this drives me nuts that you didn't clean up the engine when you had everything exposed?
@IOCaneTech8 ай бұрын
LOL what did you want cleaned? Anything that would affect performance, or just cosmetic LMAO :)
@jakeowsley65529 ай бұрын
What an awesome video, nice focus, good detail on the servo! Thank you! I am trying to save my client some $$$ and this is perfect.
@guyp35999 ай бұрын
Windows xp? :-)
@IOCaneTech9 ай бұрын
Bruh this was filmed 8+ years ago. LOL However the steps are still the same on a newer OS.
@guyp35999 ай бұрын
@@IOCaneTech Love XP! Don't get me wong! :-)
@driveinstructordrivingscho82339 ай бұрын
Hi funman, hello, can I use this video on my channel? Any comment about what or where did this happen? Thanks and stay safe.
@IOCaneTech9 ай бұрын
Go for it. Rearended at 65 mph. Totaled my car and knocked me out cold and broke the dashcam, Interstate 80 in Sacramento, CA
@davidbuie331610 ай бұрын
This was extremely helpful. I copied you pretty much exactly and my 10-year-old generator now runs again and sounds great. Thanks so much for your help
@andresmenjivarjr.823010 ай бұрын
question, I'm trying to do a wireless code registration and when I try to begin the process I get a message saying it failed. Could having the max number of allowed remotes be a cause for that?
@IOCaneTech10 ай бұрын
Possible. How many are programmed?
@Corey-dy2cq10 ай бұрын
Hey thanks for the video. Curious how the new carb is holding up?
@IOCaneTech10 ай бұрын
Excellent like new :)
@frankconnors683110 ай бұрын
Hi, Is there one for a 2023 1.5 with button to the left of the steering wheel? Thanks in advance.
@IOCaneTech10 ай бұрын
We have unconfirmed rumors that our TDA3 device may fit the new 2023 Highlander. Let us know if you would like to test one out :)
@frankconnors683110 ай бұрын
yes, How much? Do you have private messaging capabilities ? Thanks@@IOCaneTech
@IOCaneTech10 ай бұрын
@@frankconnors6831 Contact us at [email protected] We will send you a free unit to try out :)
@TheFixerFlipper10 ай бұрын
Still working in 2023, just programmed the unlock and lock buttons on my wife’s 2016 Corolla using your video. Thanks!
@IOCaneTech10 ай бұрын
Awesome news!!!
@teddake404911 ай бұрын
Nice piece. Thanks
@tomb289111 ай бұрын
Anyone know of a reason not to pair the Honda with a predator or Yamaha for increase watt output?
@LarryKapp19 ай бұрын
They would need to be synced with each other so the sine wave output of the AC is the same . With Honda you can do that with the connecting cables. Not sure if the other can do that or if the sync cables between different brands would be compatible ( my guess is not ).
@satx_heavymetaltundra11 ай бұрын
Great video!! Do you have a module that will work in a 2023 Highlander XSE? If so, could you also do a video showing how to install it on this Highlander model as the button to disable that feature is located left of the steering wheel on the dash.
@IOCaneTech11 ай бұрын
We will someday have a unit for the 2023+ units. But right now we don't have any :(
@rodderoon11 ай бұрын
This was super helpful , thanks!
@IOCaneTech11 ай бұрын
Glad I could help :)
@deanaoxo11 ай бұрын
Thank you. You Tube University Professors are the best~!~
@Bob-gi9nt11 ай бұрын
Package arrived quickly and well protected. Seems to work great on my 2023 Tundra. Helps if you're a contortionist when installing.
@crespillo5k11 ай бұрын
Great video thank you
@GreasedShadow11 ай бұрын
with the help of other KZfaqrs I fixed my EY2000. First by cleaning the jet. no go. Then new jets. no go. Then new Carbs from Amazon. th EU200 now running well. I also have a EU2000 Companion. Both showed the hard starting and full choke to run. So everything I did twice. Then I found the Companion carb servo cable connector was different. Back to KZfaq and your solution worked perfectly. I only spent around 8 hours doing this including puting carbs in and out and in and out... When I was working I would get $200/hr. so I guess I should have bought new generators. But as a retired engineer, what else do I have to do? Rewrite the software?
@LarryKapp19 ай бұрын
The jets in the bottom bowl of mine were clean but it still didn't run right. Then I saw a video where there is a plastic part on top of the carb with an orifice ( jet) in it and that one was totally plugged and I couldn't even push a wire through it. I had a small micro drill and drilled it out . After that and spraying everything good with carb cleaner my generator runs fine now. I never would have known about that plastic part at top because only one video of a few I watched showed that part comes out for cleaning.