That fixed my Ford right up it had same piece of plastic stuck in fan motor

Truck developed a sudden misfire. Plug was gross. Cleaned it and it still misfired. Changed plug wires. Went from cyl #1 misfire to multiple. Valve cover was pulled and no sludge or loose rockers. What could it be?

This was super helpful!! Thank you

What about 2008 jeep liberty

What about 2008 jeep liberty

Been working on my car for a solid month straight it was a $600 car , bought and replaced radiator reservoir, Fuel Pressure Sensor , PCV Valve, battery, spark plugs, starter, Valve Cover Gasket, Intake manifold gasket, oil / oil filter, and tires. After the valve cover gasket and spark plug replacement I did I tested her and stalled and lost power on a incline everything was fine then till that incline hill hit and she just wasn’t given any beans and lost power right over the hill. Drove back after tiring her off and turned her back on drove back fine but check engine light came back on so I gotta replace that fuel pump tomorrow. And then test number 2 will happen hopefully she’s road worthy by this weekend.

NICE TRICK TO LOOP LINE ON HOOK - EVENS OUT SPOOL - EASY RELOAD PROCEDURE - THANKS

Good beginning....nice shots. I wish he would have made this a full video showing the repair from start to finish.

you covered my problem thank you.

Is a 2009 Mazda Tribute subject to this problem ?. I'm looking at buying one that's in great condition as far as I know, then I saw this youtube video. Vehicle has 245 k km on it.

Excellent presentation

Very good video. Thank You.

What do u do AFTER you've put the fix a flat in?? Like do u need a new tire or what?? I'm in the same situation on my bike is why I asked

It’s works for 2008 jeep liberty

Omg he knows nothing about the pan America

She could just shift her butt one way or another and not lower the bike!

Just bought a 2024 pa. These videos will be very handy thanks

Thanks for the video. I was looking for someone who put a 195/75R16 tire on a Goldwing. I just bought one and am waiting for it to arrive so I can install it.

Hello. I bought a 2008 2500 6.6 duramax at auction with the same problem. After ordering a new harness from GM I am getting lots of codes and reduce power. I’ve checked all connections and all seem fine. What would you recommend next. Thank you

Hello. I bought a 2008 2500 6.6 duramax at auction with the same problem. After ordering a new harness from GM I am getting lots of codes and reduce power. I’ve checked all connections and all seem fine. What would you recommend next. Thank you

Hello. I bought a 2008 2500 6.6 duramax at auction with the same problem. After ordering a new harness from GM I am getting lots of codes and reduce power. I’ve checked all connections and all seem fine. What would you recommend next. Thank you

I just saw your video. Hopefully you have it fixed by now. I was going to suggest an air leak at the carb boot, bad cdi or faulty reverse switch on the left handlebar.

when you replaced the head unit in the dash, how did you program it?

That's super slow

@josephvollmar what size blind hole puller did you use to pull the old bushing out? And where did you buy it from? Also I’m in Arnold MO and interested in you doing this service for my 2010 fusion. Could you DM?

It is a 90 Degree Bevel Drive...a Differential is for a Pair of Driving Wheels.

PSR makes aftermarket kickstands for those bikes that have lowering links installed. I have one on my 2003 CBR 600rr.

I have a 2016 2m4 and I took the tensioner out before setting TDC and now I'm not sure how to get it back to TDC ?

Good job

I wish mechanics would use better English than "tear" apart. For example, one doesn't "tear" apart the axle. Paper can be torn, clothing can be torn. You cannot "tear down" an engine. What is happening is it is being "unbolted" or "dismantled." I believe the word "tear" was engineered to psychologically scare car owners because nothing is being "teared/torn". That said. Anyone know where the list of TSBs can be found? In 2001 the internet was easy and I could easily find the list to print out with my first car. The Fusion is my second car and I didn't think much about it until now.

So fire up the air compressor while you talk, annoying!

very informative thank you

omg those moronic anus engineers @ ford have really done it this time that atf is expensive And the idiots make the internal filter inaccessible unless you pull the casing apart for a rebuild i've found an aftermarket inline spin on filter kit it's just aggravating that these guys didn't have the foresight to incorporate a spin on filter into the casing just a bad design that costs people thousands to get fixed or replaced and they knew that was going to be the case reminds me of Boeings cargo door on the 747 that actually cost lives really makes me mad whatever happened to American Quality??????

Great video

Couldn't see a thing

What about rear wheel bearings for 98 DeVille

Hey , find might have a design problem . Just pulled that piece out of my blower this morning . Turn on ac and the racket . Dropped fan and there it was .

Nice job

Ive got a 2012 Fusion, thats got this same problem. I spent 2 days attempting to get the CV axle out of the transmission, had al sorts of different tools, and even a slide hammer. Just could not get the axle out of the transmission. gave up after 2 days, put it back together and said screw this...I will have to just keep putting fluid in. Im going to be getting rid of the car instead...its 12 years old, with 251000 miles on it...

Thanks very helpful

Video is not helpful at all

So what the modern ultra low sulfur diesel being lower in lubricity makes them eat the dust sooner than later.

What he didnt show is how get to the nut behind the electric motor to losing the nut to raise the window you remove the 2 screws remove cover pull the shaft out use a size 10 wrench and loosen it is easier to get to

Great job,,I feel your pain,,Have one flooding gas coming out donut exhaust, changed carbs 3 times same thing cam is good rockers good valve lash is good plugs good ,deactivated kill switch. gas in the oil, wtf?

I’m having trouble popping the slave master cylinder back into the fire wall. It seems to go in but I can’t rotate it to lock it. Any tips?

Hey how you on my 07 g5 2.2 ecotec when i check for spark on each cyclinder with sparktester everyone shows spark but cyclinder 2 is this a timing issue? Repaced plugs,coils,fuelinjectors,etc still shows no spark on 2 cant figure out why?

What ever happened to this deal?

Where did you buy it ? Please tell me.

Exactly the same issue, awesome and thanks, I made my son do it 😅 quiet again 👍

My fleet has 20 ford escape hybrids. 3 of the 20 transmission failed and they failed when my drivers were on the road....