Saying K3 Gsxr means 2003 GSXR. You dont have to say K3 2003 GSXR.I have a buddy thought it meant its faster like a higher spec. Idk why
@NWebb-sy4lx3 ай бұрын
You show none of the important parts like how the brake cal mounts and do you use all the parts you removed like the old slack adjusters ?????
@jblendzzzz5 ай бұрын
My axel seems to be too short on my extension kit idk if I need to take something out, it looks perfect on the right side I’m just having trouble with the left side
@lowlifestreetbikes58065 ай бұрын
Are you using the original spacers that came on the axle ?
@JayDay0136 ай бұрын
excellent walkthrough for my gen1 10r. im bookmarking. ty
@lowlifestreetbikes58066 ай бұрын
Your very welcome glad it helped out
@JayDay0136 ай бұрын
@@lowlifestreetbikes5806just an update, finished and my clutch cable replacement and followed your vid spot on. +1 sub
@elianderson39568 ай бұрын
Clip style chain link is sketchy for a 1000
@lowlifestreetbikes58066 ай бұрын
Running a clip style on my turbo Hayabusa also so far no issues
@typicalgerm290610 ай бұрын
hey buddy someone needs to do a extention removal back to oem noone has a video like that
@lowlifestreetbikes580610 ай бұрын
Once I find a bike to do that I’ll most definitely do it
@BrandonSmith-lc7fy11 ай бұрын
Are you still able to use ur rear stand with the spools or do u have to opt out to using the flat rear stand?
@lowlifestreetbikes580610 ай бұрын
I’ve had a few bikes that were able to keep the spools and others where I had to use the flat stands
@albatini8889 Жыл бұрын
Thats a fresh exhaust, do you know which one it is?
@lowlifestreetbikes5806 Жыл бұрын
To the best of knowledge it’s a stock header with a slip on tip noting fancy
@adariushickmon293 Жыл бұрын
Im not seeing how this video only has 57 likes bro 🤯🤯🤯
@SouthDemonHoard Жыл бұрын
I bought a 78 Kawasaki KZ 200 , engine was bad so I’m a take this time and go with a bigger engine , so I found out that i need to extend the rear , thanks for your video , it helps me to do this insane MOD
@lowlifestreetbikes5806 Жыл бұрын
Glad it was of some help 👍🏽👌🏽
@athletenation2155 Жыл бұрын
Hey could use your help. So I ran into the same problem you did with the left side extension where it would go In properly. The right side sat in with No problem. Question is , do they have to sit exactly the same? Because the left side extension just won’t do it
@bryanr7346 Жыл бұрын
Hello to remove the large nut which hub do you use 30mm or 32mm?
@lowlifestreetbikes5806 Жыл бұрын
I honestly can’t remember but from the socket I used I wanna say it’s a 36mm
@grzegorztak5292 Жыл бұрын
The extension is for the lazy
@jarripotero8535 Жыл бұрын
31-12-2022 Saturday I replaced my ZX10R ´04 first clutch cable, 148.186Km.
@shanegardner7892 Жыл бұрын
Hey bro I know this is a old video, but do you remember what spacer you used for the rear brake caliper??
@lowlifestreetbikes5806 Жыл бұрын
I used the oem wheel spacers you might have to pry the arm apart just a bit to get it to fit but the oem ones work and for the caliper I used the like below evilswingarms.mobile034.com/p/9529757/brake-bracket-triangle-billet.html y
@shanegardner7892 Жыл бұрын
@@lowlifestreetbikes5806 Preciate it..
@bridgetterodriguez5023 Жыл бұрын
Who's the hunk in the gray & black sweater? 😏😉😘
@tactically_inept Жыл бұрын
I know that guy!! I can hook you up with him!
@raymonddelvalle2871 Жыл бұрын
Good job bro
@ohcra Жыл бұрын
Did you sell the old swingarm and extensions? I’d be interested to buy
@lowlifestreetbikes5806 Жыл бұрын
I still have it and I’m gonna keep it for when u do standing 1/2mile runs
@tonyboykin6980 Жыл бұрын
What sizes changed did you get
@lowlifestreetbikes5806 Жыл бұрын
I think I had got something like 140link and cut it down to fit
@midtengixxer Жыл бұрын
About to install my 9” blocks tomorrow. Were you still able to use the rear stand after the stretch? I wasnt sure if it had enough room behind the tire to get in there.
@lowlifestreetbikes5806 Жыл бұрын
I’m still able to use a rear stand but I don’t use the spools I use the regular flat style stand
@karmeloturnersr17703 ай бұрын
What size master an rear sprockets for 9” streetched 600cc
@akpost87802 жыл бұрын
Good video, about to replace my cable on a Kawa. I’m going to use grease on the cable-lever insert and on the top part of the cable… that could be why ur buddy’s frayed so much… also, I feed the cable under the dash indicators… but if ur bike came w the cable running over the top then I guess thats cool. Ty for the vid
@nateskolnick9452 жыл бұрын
How do you know how big of a chain to use I have a 5 an a half stretch other bike I just bought and need a chain
@lowlifestreetbikes5806 Жыл бұрын
It’s hard to say I usually get a chain that’s longer and cut down as needed
@ivangonzalezmarin69602 жыл бұрын
Hi men i have 1 question the gen 2 swingarm can it fit Gsx R1000 2014 thnx it will me allot
@silversoozookee28392 жыл бұрын
Whuuuuut? This is crazy
@ldcanal2 жыл бұрын
I have a K1 750, I extended, should the sprockets need to be replaced as well to match speed due to mod?
@tactically_inept2 жыл бұрын
The swing arm has no affect on speed. Your only going to change sprockets if you want more low end torque or if you want more top end MPH
@sharrodking39612 жыл бұрын
Ok video but you got to show more details you skip parts where it’s hard to tell what was done and how it was done
@tactically_inept2 жыл бұрын
Greatly appreciate the feedback, this year we plan to do many more videos. its hard to take 2 hours of video and condense it to 12ish minutes. but yes i know what you mean. THANK YOU.
@armandov24242 жыл бұрын
I'd be curious to see how it handles... what are the real life differences.
@tactically_inept2 жыл бұрын
It handles great, Especially since this is a short extension, riding is almost no different. Cornering you notice a difference. We primarily drag race. That is where the extra wheel base really shines. My ZX10 is extended 12 over and i can still corner fairly well.
@norsu66632 жыл бұрын
How many chain links with the extensions? Thanks
@tactically_inept2 жыл бұрын
Depends on the length of the extension. My zx10r is 12 over and i have 150 link chain
@miketysonjr71442 жыл бұрын
How much u charge to do a 2014 gsxr1000
@MattBruzdziak2 жыл бұрын
Thanks for saving me a trip to the shop. I'm familiar with Hydraulic Clutch
@lowlifestreetbikes58062 жыл бұрын
My busa is a hydro clutch but the cable is just a simple item to change
@ryansmith84543 жыл бұрын
I’m trying to stretch my o4 gsxr what do I need to buy
@lowlifestreetbikes58063 жыл бұрын
eBay sells the extension kit with chain and longer brake hose as a bundle. I just picked up another 04 Gsxr1000 also so fun bikes
@edgarrivera4763 жыл бұрын
Length of swing arm ?
@lowlifestreetbikes58063 жыл бұрын
Not exactly sure I can measure it here in the next few days and tell you.
@SystemAdministrator13 жыл бұрын
Nice, informative video Please do more on this bike
@boons11323 жыл бұрын
Can you stretch any bike?
@lowlifestreetbikes58063 жыл бұрын
Depends on the bike honestly I’ve done Honda’s,Yamaha’s, Suzuki’s and Kawasaki’s
@KelsS1k3 жыл бұрын
preciate you OG, not here for what i just learned but i learned it cause of you, how to remove a wheel from this bike, i got the same bike
@lowlifestreetbikes58063 жыл бұрын
Anytime broski that’s what I’m posting for to help others out 👍🏽
@flexmarchetti3 жыл бұрын
Did you use a special tool to secure down the master link after taking out the last couple links?
@lowlifestreetbikes58063 жыл бұрын
No I used a clip on style master link no need for tools besides some pliers.
@AP-wu1rv3 жыл бұрын
Is the Roary boyz kit reliable and good quality?
@lowlifestreetbikes58063 жыл бұрын
Personally I can’t say I don’t think I’ve used any of the kits they have out
@flexmarchetti3 жыл бұрын
How does it ride on the street like this?
@lowlifestreetbikes58063 жыл бұрын
For me it rode just like it did before it was extended
@flexmarchetti3 жыл бұрын
Thank you, I'm going to do this to my 2001
@lowlifestreetbikes58063 жыл бұрын
Your welcome thanks for watching
@jcolivera8813 жыл бұрын
Awesome video, but me personally would like to see you do more of the work so we can all see you cus and talk to yourself and cus some more lol great job bro!
@lowlifestreetbikes58063 жыл бұрын
Ya one of my co workers told me the same thing. -BK
@lowlifestreetbikes58063 жыл бұрын
It's most definitely a learning process. We will get better. Thanks for your input JC. -BK
@jcolivera8813 жыл бұрын
@@lowlifestreetbikes5806 now for my favorite part of the video , the ratchet straps used to hang the bike lol
@andymonic5623 жыл бұрын
Can the 2001 GSXR 600 be setup the same ? I bought the same kit but it came with extension bar for the brake caliper. Want to know if I need it to be on it? Thanks and great video.
@lowlifestreetbikes58063 жыл бұрын
You’ll have to use the bar for the brake caliper on your bike yes I would recommend using it. -Wrench
@andymonic5623 жыл бұрын
@@lowlifestreetbikes5806 any advantages mounting the caliper on the bottom rather on top?
@lowlifestreetbikes58063 жыл бұрын
No not really in your case that’s just how they made it and sitting at the bottom puts the bleeder screw pointed up which is how you want it to get the air out of the system when it comes time to bleed it out
@argentdiary34833 жыл бұрын
If at first it doesn't fit...hammer the shit out of it... lmfao!!
@lowlifestreetbikes58063 жыл бұрын
Just needed a few strategic vibrations placed on it lol
@raisingthemrightranch3 жыл бұрын
Great catch, that could have been bad if it broke mid run.
@lowlifestreetbikes58063 жыл бұрын
Thanks we do our best to keep each other safe at the track -Wrench
@jessicarodriguez39343 жыл бұрын
Perrisimo ! 👍
@jcolivera8813 жыл бұрын
Nice!!! Good video!
@lowlifestreetbikes58063 жыл бұрын
Thanks! -BK
@edgarcrnd963 жыл бұрын
Is it necessary to lower the bike if you’re going to add extensions?
@lowlifestreetbikes58063 жыл бұрын
No. Although it does help if your wanting to drag race. Helps keep the front end down. All our bikes are stretched,lowered and have a strap kit on the front.
@shazshaz70453 жыл бұрын
How long have you been dragging
@shazshaz70453 жыл бұрын
Nice bikes man
@shazshaz70453 жыл бұрын
Are those extensions strong
@lowlifestreetbikes58063 жыл бұрын
So "wrench"(busa & gsxr1k) has been drag racing for 3 years and "BK" ( blue zx10r) has been about 2 years maybe a little less
@lowlifestreetbikes58063 жыл бұрын
Yes. The ones we installed in the gsxr are pretty strong. We have used them on many bikes and have had no issues. Many launches on the busa and with nitrous. Pulling 1.3 - 1.4 60fts no issues