You forgot to mention one thing. Alignment after you're done.
@Dan_AYP2 күн бұрын
@@johneppenauer6772 nothing a £10 part worn can't resolve on this shed 🤣 in all seriousness, the change would be minimal as the track rod end is the only area of adjustment on this suspension type. Everything else is fixed
@Sheppy-x6c7 күн бұрын
Those rotors are cashed bud
@Dan_AYP7 күн бұрын
@@Sheppy-x6c it's fair to say they've been replaced since this video was posted over 2 years ago 😂
@johnqt230811 күн бұрын
Hello first of all love the content! But I have a quick question, does your DC2 wing give you a hard time installing? Like the fitment etc because I own a 98 Civic sedan and I'm trying to install one but people saying the dc2 wing is too big for my trunk. I hope You noticed my comment
@Dan_AYP9 күн бұрын
@@johnqt2308 Thanks appreciate the kind words and regarding the spoiler, I'm unsure for the sedan, sorry bro
@jakeguitarbass720914 күн бұрын
Any chance you could share the part numbers for those yellow stuff pads? Great video!
@Dan_AYP14 күн бұрын
@@jakeguitarbass7209 I believe they're Yellowstuff Rear Brake Pads - DP42120R Yellowstuff Front Brake Pads - DP42003R From my email with Josh at EBC 🤙🏼
@jakeguitarbass720913 күн бұрын
@@Dan_AYP Much Appreciated Dan. I currently still have the factory brakes that are on 30,000km. Ever so often the front pads rattle when going over the occasional pot hole. Usually signs of worn pads and fittings.
@stevelewis839418 күн бұрын
Now I've seen everything! A KZfaq tutorial on teaching a girl how to do a blow off job. 🤣🤣😂
@johnnywinstone20 күн бұрын
Thanks dude. Good review.
@toddwalker510220 күн бұрын
Well woulda been nice seeing how the fuckin cv axle slides out without loosening knuckle
@Dan_AYP16 күн бұрын
Full lock, both sides jacked up so the suspension is fully extended 👍🏻 should slide out with just enough room
@twola902726 күн бұрын
Safe? Yes , terminator ate these till adulthood
@FredscatАй бұрын
Im working on my 15 silverado right now, front caliper wont come off, removed both 19 mm bolts, wiggles a bit but its stuck, any advice, im stuck on treasure island
@Vova3iLvovaАй бұрын
is it ok to reuse control arm bolts? manual says replace
@Dan_AYPАй бұрын
If the manual says replace, then always replace. 👍🏻 New bolts certainly wouldn't hurt, replace and renew the bolts could mean 2 different things though
@Vova3iLvovaАй бұрын
@@Dan_AYP i went to the dealership with intent to get new bolts, and they talked me out of it. idk if they saved be a buck or want me dead, heh. i guess im reusing 10yo bolts
@stevelewis8394Ай бұрын
I prefer the exterior styling of the previous model (1.6 Sport) and wish the 2017 model had a better choice of wheels. Can't argue with the lighter weight and faster acceleration but there are so many reports of them being nowhere near as much fun to drive as the revy 1.6 Sport - a case of all torque and no pizazz?
@JaneDoe-ft7ln26 күн бұрын
Have owned both and they're both a lot of fun. The 1.4t is much easier to drive in everyday situations and the extra pull from the increased torque won't suck you back into your seat but does feel good from any engine speed when you're on the throttle. The 1.6 has no pull to speak of and you have to rev the nuts off to make progress. Yes it's fun but can also be tiresome sometimes too, especially in traffic.
@jljl3955Ай бұрын
Is it M10 size?
@oliviamalat232Ай бұрын
THANK YOU
@Mave242Ай бұрын
No good sounding exhaust at all...i hear a FIAT 500 Abarth and think: wow...what a fantastic sound for such a small engine. Ich hear the SSS and think: Sound?
@apathyboy530619 күн бұрын
Man those Abarths sound better stock than 90 percent of modified cars out there
@lewischafer3333Ай бұрын
Another Great Content ever 👌
@Dan_AYPАй бұрын
@@lewischafer3333 thanks lewis
@lewischafer3333Ай бұрын
@@Dan_AYP you are Welcome
@Dan_AYPАй бұрын
As a quick tip- If you're unsure if your shock absorbers failed, the car may feel unstable and might rattle or clatter over small bumps in the road when going over them with that wheel/corner. That's when you can get underneath and check them for leaks or, try a bump test where you're checking the car settles before 3 bounces when pressing on the car to compress the suspension 👍🏻
@harmagedon9473Ай бұрын
gj
@MikeH401Ай бұрын
Great video.
@dividivusАй бұрын
Since you did not replace the dust cover on the strut, you can not make sure that everything is perfect.
@Dan_AYPАй бұрын
@@dividivus nothings perfect, it's a £600 car 😂
@AJS_1705Ай бұрын
Thanks man
@Dan_AYPАй бұрын
A few additions First number is Tread width (tyre width) Then its Aspect ratio = side wall height as a percentage of the tyre width 17 or the following 2 digit number is the wheel diameter 👍🏻
@lewischafer3333Ай бұрын
Another Best Content ever 👌
@Dan_AYPАй бұрын
Thanks Lewis mate
@lewischafer3333Ай бұрын
@@Dan_AYP you are Welcome
@lorenzovera60012 ай бұрын
Shingo: :(
@TN_AU2 ай бұрын
Pssssh sounds ok, but we need the turbo flutter...zrooom stu tu tu tu tu tu...
@rubencasillas45102 ай бұрын
The tires are worn out when they get to the wear bars
@Dan_AYP2 ай бұрын
Some aren't as accurate as you'd expect. Most are set at 2mm, but can go lower even than the 1.6mm specified in the UK.
@Dan_AYP2 ай бұрын
I'm going to be really smashing the how tos and have a dedicated playlist with around 70 videos on it already, so feel free to check it out 👍🏻
@lewischafer33332 ай бұрын
Another Best Content ever 👌
@Dan_AYP2 ай бұрын
Thanks mate
@lewischafer33332 ай бұрын
@@Dan_AYP you are Welcome
@Jhet2 ай бұрын
Good stuff, looking forward to more tips like this in future videos! You earned a sub, definitely deserve it. Though you could be a bit more structured, but it's not terrible the way it is.
@Dan_AYP2 ай бұрын
Hey thanks for watching and any suggestions on how to improve the content, be it structure or even the subject being discussed, I'm all ears man 👍🏻
@sipepguru2 ай бұрын
Ho pal, i am looking at buying a swift sport 1.4, abd found your videos, still happy with the sss? I am also considering a gt86
@Dan_AYP2 ай бұрын
Yes mate very much so but, if you don't need the 4 doors and rear seats like my Mrs does, (we have 2 kids) I'd recommend the 86 over the SSS. It's faster, more of a drivers car. The SSS is the hatch I'd buy over all the other mini hatches though 👍🏻 including the fiesta, abarth etc
@eddiesheppard95442 ай бұрын
You better do that shit dude!
@pinnacleexpress4202 ай бұрын
Dude I have no idea why you turned the piston. Just turning it, and then turning it back to how it was, can cause it to move better afterwards?... What ? The dude in the other video popped the thing out and sanded the sides until it was shiny.
@Dan_AYP2 ай бұрын
Sometimes a full caliper refresh isn't needed and the pistons on the rear wind back as they have a ratchet mechanism internally for the handbrake. With this in mind, simply moving the piston can "free it off" enough to not need a full caliper refurb. To add, dismantling the caliper can result in seals getting damaged and/or split. This is fine if you have a full set of rubbers to replace them with but if not, you end up with a bricked car until you buy them. Most replacement calipers are also very close to a refurb kit in cost but, you save a lot of time by just buying a replacement caliper. If you want another video showing the caliper teardown and rebuild I believe theres one on a civic ev1 on my channel 👍🏻
@Dan_AYP2 ай бұрын
Another quick how to and many more to come 👍🏻 seems theyre the demand on the channel
@lewischafer33332 ай бұрын
Another epic Content ever 👌
@Dan_AYP2 ай бұрын
Thanks lad
@lewischafer33332 ай бұрын
@@Dan_AYP you are Welcome
@justjames11112 ай бұрын
Hi Dan, great job by your Dad. Can I ask, why he didn't feel the need to tape off the surrounding area and also would he advise an Orbital Polisher or would a Cordless drill do just as well ? Thanks
@Dan_AYP2 ай бұрын
Paints gone on the car mate haha and orbital was all he had to hand at the time. That's the only reason mate 👍🏻 a cordless drill does work and I've done that myself on another headlight resto on the EM1 build. It's on the channel somewhere 😁
@k00lkane2 ай бұрын
Did the ABS pump not need reprogramming/recoding?
@martinparsons42383 ай бұрын
Really helpful video 👍 What are the torque settings? Do you have a link for the video of the rears?
@Dan_AYP3 ай бұрын
Thanks mate, I can't recall the torque settings (check online/auto data) but you can find the rears done over on silverline tools channel where I did them as a how to for them 👍🏻
@frestless32883 ай бұрын
That’s not the Greddy extreme power, I am sure about it
@Anam.Hussain3 ай бұрын
Hi Dan great video, my swift brake pedal makes a high pitched sound when the pedal is going back up and i also noticed that it takes a little longer to brake then normal. Do you know what that may be, I have heard the master cylinder tends to fail and if replacing the abs pump do they need re programmed. Thanks
@chrro4663 ай бұрын
Change those gloves before fitting new discs and pads. 🤔
@chrro4663 ай бұрын
Great little cars I’m on my original pads and discs still but I’ll try these EBC pads when I change them. 👍🏻
@justintighe35263 ай бұрын
Excellent video going to do mine now
@konukonu63683 ай бұрын
Hiw much wss the cheap buffet plz ❓
@wiganer991225 күн бұрын
It was cheap, I can tell you that much
@user-if6ov4fy5t3 ай бұрын
how do the brakes work today? Are they durable and better than the series? (cold and warm)
@Dan_AYP3 ай бұрын
They're mint! Really grabby compared to the OEM pads even when cold and very resistant to high temps on a spirited drive. Although I never got the OEM ones to fade completely, these have never shown any signs of fade where I would have expected the OEM ones to start fading. Brake dust is heavy though as you would expect from a performance pad 👍🏻
@Dan_AYP3 ай бұрын
I'll do a review if you're interested
@user-if6ov4fy5t3 ай бұрын
@@Dan_AYP Thanks for your answer, I would be happy to see a review!
@rm-dc6tx3 ай бұрын
those rotors look very scored?
@craigman72623 ай бұрын
damn that whole strut should've been replaced
@Dan_AYP3 ай бұрын
But on a £600 car it doesn't 😆
@disturbedcarrot4 ай бұрын
Would appreciate an update after a year. My experience of comline brakes has not been positive.
@Urra834 ай бұрын
HKS Spec L love it
@inezneal69174 ай бұрын
I don't understand why the residue always stays. I have a different brand that the residue had a glare.
@cursory90314 ай бұрын
Me watching this video: 👤
@Dan_AYP4 ай бұрын
Me reading this comment 🤷🏼
@cursory90314 ай бұрын
What’s the purpose of this?
@Dan_AYP4 ай бұрын
So you can reset it after completing a service yourself
@hineshgudka9834 ай бұрын
What happens when you're rewinding the piston but then that last 3mm doesn't want to wind ???? Currently in a predicament where the piston won't wind all the way not allowing me to fit new pads, I have a rewind tool no ecu rewind unfortunately