Hi, I know this is an old review but, I’m looking to buy this type of receiver and I wanted to know , can play KZfaq from my Iphone through this device?

that is nice. would be even nicer if it had swivel casters on front like it has on the back

😮😮😮. ,, THIS GUY HAS NOT A CLUE ,, WHAT HE IS TALKING ABOUT ,, PROPANE ❓❓❓ 4 YEARS AGO ,, WORKS IN THE TRADES ❓❓ NO DON'T SOUNDS GOOD 👎👎

back when a half hour program wasn't 1/3 commercials

Nice, good idea to find a vise and a workbench to make your life easier 😊

What the hell no way .why are you doing it the hard way

What a waste of 4.39

Have a 2003, renovating by changing from roberts screws to phillips. Only about 80% complete but unit vehicle runs better and sure looks nicer.

Did they work

Your the only video that helped me on my van , thank you.

Why the heck do you have the engine running

Thanks a lot to you for sharing valuable educational video with us.

Have a Noco genius 10 charger and it won't recognize my dead lithium Noco motorcycle battery. How w do I get it to TAKE.

Hi there, nice video. I was just wondering, do you know if you can use the WXC-50 strictly as a streamer/pre amp and bypass the DAC, so you can connect to another external DAC? I have a WXC-50 and am using it in pre-amp/streamer mode so I basically have the pre-amp out RCA’s going straight into a 2 channel power amp. I can use the volume knob or remote or the app to control volume and tone. But as it is now, it basically converts the music I’m streaming to it, and then outputs it to the speakers. Therefore it’s obviously using the internal DAC of the WXC-50 to convert the digital signal to analogue - but I want to bypass the DAC in the Yamaha as I’m planning on buying a Geshelli Labs L2 as my DAC (it has XLR balanced outs and my power amp has XLR balanced ins). Will it bypass the DAC in the Yamaha and if so, do you know what settings I need to set the switches on the back of the WXC-50 to?

Thanks for the video, Ever found the name of that "Black filling tool" or get your hands on it? have a link to the tool?

This van is a complete piece of sht.

I have a 2002 dodge roadtrek popular 190. Trying to figure out how the fresh, black and gray water tanks are set up. I think the hose is missing to drain the holding tanks. Is it supposed to be integrated or stored? I can't find this data anywhere!

So how did u actually take caliper brake hose off? how do u remove the bracket

Harbor Freight 24" adjustable wrench with a pipe on the end will give more than enough torque to tighten those balls

If you could go back would you do it again?

Does anyone have a list (checklist) of what to do when pulling into a camp site ? 1.0 Level the van 2.) Hook up water, etc, Im not used to this van yet and don't want to make a mistake- like not filling the hot water tank...and so forth. TIA

Your video is great. We have a heated roof system needed to be reviewed. I hope you can review it for me. Could you please let me know your email?

I have an easy solution to ice dams. Turn your thermostat down! Put on a couple of sweaters it works every time.

On the vehicle battery disconnect, im pretty sure it should be on the negative cable.

clearn your van dirtbag

This charge fast mines is talking long

Hello, my brother, I have a problem with a 2005 Jeep Cherokee. When it goes at 60, emergency mode appears, the gear sticks at 3, it says check engine, and when the engine is turned off, it returns to D. What is the solution and what is the problem?

Nothing worse than watching a guy work with one hand. Spend the $5 and get tripod or something

I would like to find a way to locate stolem bottles even though I told the local gas supplier they were stolen they still want to charge rent or me pay for them, I thought they should have insurance for such occurances.But this is my first time down this road having something leased that gets stolen

you mentioned picking up bottles out of the dump and trading 2 smaller ones for 1 bigger one at the welding supply if I understood, then who owns the 1 large bottle? it still belongs to welding gas supply co and you have to lease it??

I love these old timey productions. Periscope Films any day of the week.

Thank you so much! The tire was changed. They didn't put the spare back after fixing it. 👍🏽

I have to believe that some effort to clean up dirt & grime especially around the shower drain would have been helpful.

A very good video, I just got my NLP14 this week and will be cutting out the back of the battery box next. An FYI for your watchers, order the battery Noco factory direct. It is the best way to get the 5 year warranty honored should you need to. With their promo code it was also cheaper than most anywhere else.

Life saver! Thanks !

Those noco batts are not lithium ion. They are lithium iron phosphate (LiFePo⁴). Be aware of the difference

THANK YOU SO MUCH

No spare tire in the Wk1 Jeep SRT8

277k miles?

Just attempted mine. Number 6 sheared off. Number 2 is so tight I don’t want to risk it. I’ve decided to leave them in there and run with four working.

I must have watched this pair of videos about 10 times over the years as I planed to do this job to our '96 Roadtrek. I finally got around to doing it this spring. This video helped a lot, so thanks. The service manual pages were useful since I only have the manual for the pickup and the suspension is different. It was also good encouragement and let me see all of the parts of the job before I got into it. It was a bit harder on our van because we have the 4 ton axle and the parts are hard to find. I had to press the bushings and joints out of our old control arms. The upper control arms with the thread in joints are a real pain. I wasn't able to get them to budge with a wrench and ended up pushing them out with a press and then screwed in new ball joints. Even though this is a big job, it's not that bad. If I were to do it again it would go much more smoothly 🙂

Thanks for the video. I just used a pronghorn to hold my battery in the modified box. Plenty strong!

Been around this stuff quite a long time and you are far better to lease bottles, they take care of re-certing them and all maintainence and you are never without a bottle to use as long as you pay the lease.

I'm in the process of removing my turbo to get to the oil cooler in the valley. Have you gone that far? I'm just looking for more help to make it less pain full. Its buried in there pretty good.

Shit. It is hard to use. Have to stop and change every time

So you gotta use the old gasket mine was leaking so bought that gasket made the dang thing leak on opposite side lol bought another gasket figured I was putting in wrong thanks helpful

Could you have used a crowfoot??

Your talking abunch of bullshit man we aint worried about done of that bs in arkansas

Hitting the pin multiple times just mushrooms the bottom of the pin, making it harder to remove even when the knurled part of the pin is clear. When using the tool, tighten the bolt very hard against the pin, then hit the bolt upwards with a hammer (one hit only), then tighten the tool again, repeat. The bolt applies a huge force on the pin, and a further tap with a hammer shocks it.

AC Fan Rumble is caused by leaves in the Blower Housing. It's an easy removal under the Glove Box to clean out 😎