Hi, if I load a VOICE with sampled components, such as Organ Session, when I turn off the keyboard I cancel the samples causing the VOICE not to work? If I put this VOICE in a PERFORMANCE, do I only lose in real time volume controls (drowbars effect) or also the samples? So the solution is to put the usb stick in AUTOLOAD and always load the samples every time the keyboard is turned on? Thank you
@XaymacaJah2 жыл бұрын
GOOD JOB TO THOSE WHO PRESENT GOOD PILOT VIEWS IN FLIGHT SIMS. ESPECIALLY FOR US PILOTS. AWESOME WORK. ONE THING I DO HATE, I S PASSENGER SIMULATIONS. (no offense intended ..)) i fly the thing, not sit in over wing window, or PRETEND TO BE A HIGH SPEED BIRD watching the thing fly by. But... thats just me, as a pilot. watching the instrument work and cockpit management.. that's where i live.
@macariothomas49093 жыл бұрын
Hey. I just watched your arm rest replacement video, and your lights stopped working in the video. Did you ever find out what went wrong? Actuator? Or? Because mines literally the same thing
@PastorReggie19813 жыл бұрын
Video STILL RELEVANT in 2021!!!
@qriskel16753 жыл бұрын
Thank you so much for the video!!! You made it so simple❤
@CreativeNative943 жыл бұрын
Definitely appreciate the informative commentary!
@CreativeNative943 жыл бұрын
Lmfaaoooo @ 17:30 😭😭😭😭😭
@mrzsonqbird3 жыл бұрын
The guys face in video 17....familiar!! 👀😂
@yachicklissy3 жыл бұрын
He just waited like “oh you gonna get this together” 😂😂😂
@slevyn113 жыл бұрын
😂😂
@CreativeNative943 жыл бұрын
😂😂😂😂😂😂
@Eduardo-jm2bh3 жыл бұрын
here in quarantine learning this piano solo and watching your video seven years later
@yunichanteur46543 жыл бұрын
Like vudeo🙏👍👍👍❤️❤️❤️
@tscrambler5003 жыл бұрын
FIRST! Lol
@brvndon47154 жыл бұрын
I have a remote start key and it locks and unlocks so my real key option buttons don’t work so I could use the flip key and it will work fine?
@RaeMichyle794 жыл бұрын
This is beautiful!
@kevinmcenerney91784 жыл бұрын
Would you be willing to re- do this video? Go a little slower and have clearer pictures of the buttons you are pressing. It would be greatly appreciated... thank you.
@mcdre18144 жыл бұрын
I know this is old but what did you do to get it to not stall?
@danielcolfer46714 жыл бұрын
Why not show how you can assign the sounds of your motif into main stage too?
@Hershey4114 жыл бұрын
How did you take your chip out to put in in the flip key??
@TeezyThaKidd4 жыл бұрын
Unscrew the back, and it unclips right out and into the flip key!
@danielnuno86204 жыл бұрын
How are your projectors holding up?
@zuzu.hallak4 жыл бұрын
I did the same thing. I put the remote key inside the empty shell and I did cut it. I tried to turn my car on but it was still flashing green key
@footage64024 жыл бұрын
Transponder is to far away from key I bet
@zuzu.hallak4 жыл бұрын
I’m going to add another key and which the transponder is not solder on the circuit board remote. The transponder is going to be separated.
@makaynchealhalibbealkhooo96734 жыл бұрын
That locksmith is a thief
@ameyagundale5 жыл бұрын
thank you.. you are a life saver.. I think content is more important than the video quality.. Thanks for putting this up again
@280392benjy5 жыл бұрын
Redo the video bro! Would b better
@robdigital59205 жыл бұрын
I am trying to figure out how to assign a Knob to say an ARP or a channel EQ to ALL instruments at once, so that its either on or off depending if I hit the button or not. Is that possible? I notice if I use the same knob adn assign it to an ARP on different instruments, I might turn it off on one instrument but then that toggles it on, on another one. I just want to assign filters and ARPS to every single track but not have to create a knob for every single patch to do that! Also do you know if there is a way to make the arp switch between only 2 or 3 ranges instead of the entire range so its easier to know what the rate is by where the knob is turned to? I hope that made sense!
@yellowkobe5 жыл бұрын
Got the same key, put my fob in from my old original key, and I just get the flashing key light. Went to Honda and they said it’s out of range from the chip. Just my luck.
@TeezyThaKidd5 жыл бұрын
Daaang that’s no bueno. Funny story, tried this with an 08 Civic I had. Literally from the same exact factory key fob, and the same exact flip key frame (obviously the key blades were different) - same thing happened. Must be something with the positioning of the chip in some models, which is why you’ll find some videos of people taking the chip off the circuit board, putting it in the “designated” slot for it inside the flip key and soldering wires from it to it’s mounting pads on the circuit board. I ain’t got time for that. So I got lucky with this one. If you’re handy with soldering small electronics AND have a second key, go for it. But if you’re like me and have only one key and no time for THAT, then it’s just a loss. Sorry it isn’t working for you 😫
@zuzu.hallak4 жыл бұрын
@@TeezyThaKidd ya. Like you said, civic 2008 doesn't work.
@thurm1015 жыл бұрын
Just got back from the dealership. The dude at the counter had to look my car up. That was cool. But he only charged me $15. It also took like a month for me to get my flip key from China. Just like you said in the video it worked like a charm!!!! Took me a minute to get the spring thing down with the tension. But I figured it out. I went out to my car and she cranked right up. The new key is still a little stiff. But with use it will smooth out.
@TeezyThaKidd5 жыл бұрын
Yeah the spring thing is the hardest/most annoying part!! Glad it worked out for you! Enjoy!
@thurm1015 жыл бұрын
Question: A lot of comments about when using the flip fob the transponder inside of fob is a bit too far from the key within. Is that still a issue? Of course making the key not work. Hoping since this is a older video that this issue was resolved.
@jeffroth65755 жыл бұрын
I had to do the same for my key but I took a part my valet key and got the chip out of it it works great now does anybody now how to program the valet key 2013 Honda civic
@jeffroth65755 жыл бұрын
You can get a key cut at ace hardware for five dollars
@thurm1015 жыл бұрын
Jeff Roth Ace Hardware cuts laser keys?
@TeezyThaKidd5 жыл бұрын
They did back when I got this done, but I didn’t live near one and went with a locksmith in the area!
@RoderickC185 жыл бұрын
Do you have a series of your build
@MarvelousMusic_Uday5 жыл бұрын
How much does mainstage 3 cost and it's patches
@TeezyThaKidd5 жыл бұрын
Marvelous Talents MainStage 3 is $29.99 in the Mac App Store. The built-in patches are free. Third-party plug-ins vary in price.
@MarvelousMusic_Uday5 жыл бұрын
@@TeezyThaKidd Thanks bro
@Nolimitboro5 жыл бұрын
Would it work for an 08 civic si?
@zionesterhuizen47286 жыл бұрын
Hey bro, i know this is years later, is ther no way to do this with an ES? Motif
@TeezyThaKidd6 жыл бұрын
Zion Esterhuizen it should work the same way.
@rodrickdubose6596 жыл бұрын
You're badass
@jxpizxl6 жыл бұрын
i just bought the same key and switch the chip but car will not stay on. is there a way to fix that?
@TeezyThaKidd6 жыл бұрын
Happened to me. That happens - per my understanding - because the transponder in the key fob isn't communicating with the receiver in the ignition. Maybe change the battery in the key fob or relocate the transponder manually... there's another video on how to do that.
@RonandBern6 жыл бұрын
bro, how do you edit the voice while in perform mode
@clarkboy2196 жыл бұрын
Once you create these mapping’s how do you save them when I exit mainstage all my assignments are rest to default!
@funnyvidperson123SOS4 жыл бұрын
Go to file and save as
@michaelcarbonara35116 жыл бұрын
Hoping you or someone could help me. Here is what I am trying to figure and I don't know if this is something you can help me with or not. 1.) I am using only the JUNO DS61 as a physical keyboard 2.) I have a MacBook Pro 3.) Focusrite interface 4.) Mainstage When I use the favorite feature I cannot control the patch change, but when I am in the patch or performance mode I can. Any suggestions Also, I in performance mode I have all 16 midi channels to apply a patch, however, I want to be able to have one of the channels to use one of the patches within Mainstage. I am not finding this very easy to do. Maybe the keyboard is not capable of this. I am trying to find a way to use the sounds in conjunction with the roland ones but within performance mode. Thanks Mike Carbonara
@shondas.8536 жыл бұрын
Good God from Zion! I walked into a place of business today and this song was playing in the store, before I knew it my feet started moving and I was dancing and praising God. That was at 4pm, it is now after 10 and I'm still playing this song... had never heard it before... but dear Jesus it is blessing me over and over! Thank you choir and all the musicians. I love you all with the love of Jesus! 💞
@iorlanch62907 жыл бұрын
Thanks for the video!! Finally i can use my Motif XF7
@hervinramirez43107 жыл бұрын
Hello there I have a question what if the master feder don't work??
@1masterfader7 жыл бұрын
How can I change the Master effect from what it is now?