Libor Vitek

Пікірлер

@klausrichter5555 11 күн бұрын

Also zusammenfassend, (2 x 547 x 210 und 720 x 226 für die Seiten. (Deckel 1x 1040 x 170 und 1040 x ??? ( Front 1 x 1040 x 50 und 1x 1040 x 210) Bis auf den Deckel richtig?

@libor-vitek 11 күн бұрын

Sir, everything shall be obvious from provided 2D drawing link in Description, so: - bottom part 1pc 700x1020 mm - side parts made of 2 pcs 700x262 mm (skew cut in accordance to dimensions 535 & 210 mm) - rear part 1pc 1040x262 mm - front parts 1pc 1040x50 mm + 1pc 1040x210 mm - top parts 1pc 1040x547 mm + 1pc 1040x170 mm

@klausrichter5555 11 күн бұрын

@@libor-vitek Danke für die Antwort, eine Frage noch . Welche Klammern verwenden sie im Tacker um die Teile gut zu verbinden?

@libor-vitek 11 күн бұрын

@@klausrichter5555 In the pneumatic gun I do not use staples, but nails, 25 mm long.

@klausrichter5555 13 күн бұрын

Könnten sie mir die Abmessungen für die einzelnen Teile schreiben? Finde die Lösung ideal für meinen Atomstack a30Pro lange Version.

@libor-vitek 13 күн бұрын

Hi, please check the Description of the video. There is available link "2D drawing for box production" with PDF file containing all necessary dimensions.

@Blaggsta 14 күн бұрын

followed your guild... turned out brillient... very nice... did not have any of the nuts bolt or rod so printed then and glued them

@libor-vitek 14 күн бұрын

Happy to hear you are satisfied and you managed another way 👍

@RomanVitek-wy5ow 25 күн бұрын

Excelent job, bro! Respect!

@libor-vitek 25 күн бұрын

Thanks bro, I had a good teacher when I was young 😉

@NETBotic 29 күн бұрын

Cool design!

@libor-vitek 29 күн бұрын

Thanks 😉

@cookingwithbacon9023 29 күн бұрын

nice work dude very excited on what you come up with next this thing looks highly capable

@libor-vitek 29 күн бұрын

Thanx a lot 😀

@gonzalop.chomon327 Ай бұрын

Nice work, very inspiring. You could separate the throttle front and rear, then you will be able to do crab crawl.

@libor-vitek Ай бұрын

Thank you Gonzalo! And yeah, dig feature is available. Beyond that, I am able to run or block any wheel separately, even change its spin direction 🙂 But this is not the end my friend, I am already thinking of completely different and more maneuverable concept 😉

@gonzalop.chomon327 29 күн бұрын

@@libor-vitek I do really like a lot your idea of using the servos as propulsion motors. Actually I think you could have used the servos electronics instead of using ESC, but maybe you way is the easiest way. HAve a look to what I did time ago: kzfaq.info/get/bejne/nsBmatqBup_Ggnk.html More info in the description. I need to revisit it. As it needs a V3 version or upper 🤣

@libor-vitek 29 күн бұрын

@@gonzalop.chomon327 Hi Gonzalo, I can see from your video that we have basically the same interest 😁👍 Regarding the servo electronics removal, the main reason I did it was: in fact it's possible to use original servo electronics as a kind of "ESC", but feedback potentiometer has to be precisely centered and fixed (or replaced by pair of resistors) and even in such case the throttle stick position is used the just for +/- 30% of its range of motion (I mean having servo motor in a kind of speed "loop", where you move throttle stick to 30% of its range of motion, the servo motor turns on 100% already), which is more or less manageable, but disadvantage anyway. Using original servo electronics as a kind of "speed controller" was tested from my side, but I did not like its behavior, so I decided rather to use regular ESC instead.

@StevPeeters Ай бұрын

Nice❤❤

@StevPeeters Ай бұрын

Nice❤❤

@icebluecuda1 2 ай бұрын

Dude. this is awesome!

@vrosi1963 2 ай бұрын

glad i saw this to keep me motivated , I already printed mine and had to stop when i moved. 6 months ago

@libor-vitek 2 ай бұрын

I hope you'll finish your build soon my friend ;) Motivation was one of the reasons why I recorded these videos :)

@RWJetfan 2 ай бұрын

Dont fly it slow.... Its going to have a heavy wing loading, but you have lots of power so that should be no issue.

@libor-vitek 2 ай бұрын

Thanks for comment! 👍

@BjoernNawrath 3 ай бұрын

in contrast to the other German who thinks its overthought - I really appreciate this design, there's less friction on the spools, especially on the paper ones its great because kinda no dust is created. The jig is well designed, must lot's of try and error to get the measurements right, thanks for that as well. Do you have a product recommendation for the d4/d4 coupling, I cannot find one? Thanks in Advance!

@libor-vitek 3 ай бұрын

Hi Björn, thanks a lot for your comment! The features you mentioned are exactly the reasons I used that design 👍 I've bought batch of d4/d4 couplings here: www.temu.com/goods.html?_bg_fs=1&goods_id=601099528095707 (PU 5/32 ) 😉

@BjoernNawrath 3 ай бұрын

@@libor-vitekAwesome, thanks for the link and your swift reply :)

@jameshoughton701 3 ай бұрын

Thanks so much for doing this, Libor. I have one question, do you know what the extensions are called so i know i have the correct ones?

@libor-vitek 3 ай бұрын

You're welcome James. But sorry me again, I do not understand what extensions you mean...

@jameshoughton701 3 ай бұрын

@libor-vitek my apologies Libor, it's my mistake. Using Bambu studio is slightly different to what I've been used to in cura. It all makes sense now though. Thank you so much!

@libor-vitek 3 ай бұрын

@@jameshoughton701 My pleasure James, keeping fingers crossed and happy landing! 😉

@jameshoughton701 3 ай бұрын

Hi Libor, I've taken the plunge and started to print this today myself after being inspired by your videos. Thank you for all you've done. I have a question. What nozzle did you use for all of the prints? Was is .4mm with Lw-pla? Also, how did you get the gaps in the fuselage 1 model at the very start of this vid? Did you cut them out yourself? The base on mine has come out completely filled in....

@libor-vitek 3 ай бұрын

Hi James, thanks a lot for your comment and congrats to taking the plunge 🙂👍 I was using 0,4 mm nozzle for all, also for LW-PLA. Before using my brand of LW-PLA (particularly PolyLight 1.0 by 3DLabPrint) I spent quite some time with calibration of slicer. I ended with slicer setup with nozzle temp. 240°C, flow rate 0,6 and printing speed 60 mm/s. Such setup gives vase wall width 0,55 mm, which is in range recommended by 3DLabPrint for their PolyLight 1.0 filament. Regarding the gaps you mentioned, I am not that much sure which gaps you mean. Do you mean the "notch" at the top/back part of Fuselage1 (used for centering "nose" on top/front part of Fuselage2)?

@jameshoughton701 3 ай бұрын

@libor-vitek this is amazing info, thank you so much! The gaps I'm referring to are on fuselage 1 (cockpit and nose). Basically, the base layers when printing are solid with no gaps in them at all, just a completely solid circle. On your print, these have gaps in, one of those you cut out a notch to put the wire through for the wheel steering?

@libor-vitek 3 ай бұрын

@@jameshoughton701 Oh, as the gaps you mean the free inner spaces at the base of Fuselage01 part, if I am not wrong. Please check this video, hopefully it will be helpful for you: kzfaq.info/get/bejne/hah4h9Wpl8mqpYU.html

@jameshoughton701 3 ай бұрын

Morning Libor, hope you're well and progressing well. I've a question on the prop's you're using. What size are they. Apologies if this is listed somewhere on one of your videos, however i've looked through them and can't find anything.

@libor-vitek 3 ай бұрын

@@jameshoughton701 Hi James, author of this 3D model offers props for 3D printing (STL files starting with syntax "Propeller" in file name), nevertheless I did not want to risk a damage of 3D printed props during flight (which might cause crash), so I bought HQProp 5x4x6 Light Grey www.6sfull.cz/hqprop-5x4x6-light-grey/ Originally I wanted to get some 4-blade 5" props, but it was tricky to find such props to me, but I liked the look of 6-blade ones, so I ordered those 😉

@Mona8519 3 ай бұрын

Sorry i have to ask! How did u Print the Nosewheels? That are not the Wheesl from the original file.

@libor-vitek 3 ай бұрын

Hi, nose wheels are not printed, but bought off the shelf 😉 www.kavanrc.com/en/item/kolo-penove-25mm-1-0-148999 as well as main wheels: www.kavanrc.com/en/item/kolo-penove-38mm-1-5-149001

@Mona8519 3 ай бұрын

@@libor-vitek thank you.

@stephanhammond4526 3 ай бұрын

*promosm* 💐

@cadbuildflyrc3784 4 ай бұрын

Very cool C-130

@klausbutz9219 4 ай бұрын

Was für ein irrer Aufwand. Da gibt es Lösungen für die selben Boxen, man druckt einen Rahmen der von oben eingesetzt wird und ein Mittelstück für die Spule. 2 Teile zu drucken.

@libor-vitek 4 ай бұрын

Šílené úsilí? To si děláš srandu. Jo, asi vím, které řešení popisuješ. To zase pro změnu připadá šílené mně.

@swarnimdeveloper 4 ай бұрын

Wow ! Amazing works.. keep going..💯💟

@uberchipmonk2568 4 ай бұрын

You will get more lift if both propellers on the same wing spin the same direction, with the top of the propeller spinning toward the wing tip. Awsome build BTW.

@libor-vitek 4 ай бұрын

Thanks for valuable comment!

@the-organic-penguin 4 ай бұрын

I love Rc planes and real planes, so this is super cool to me

@t.thompson21 4 ай бұрын

Well done. Build the same and your Videos are very helpful. Pls can you tell me what motor set u ordered for the c130. Kind regards, Tobias

@libor-vitek 4 ай бұрын

Hi Tobias, thank for your comment. I've bought particularly this motor set: www.aliexpress.com/item/32831114500.html (mentioned also in the video) I plan to run it from 2S LiPo battery. Assumed throttle in case of 2S and 5x5 props shall be at least 200 grams per motor.

@t.thompson21 4 ай бұрын

Thank you for the answer :)

@t.thompson21 4 ай бұрын

Thank you for the answer :)

@t.thompson21 4 ай бұрын

Thank you for the answer :)

@t.thompson21 4 ай бұрын

Thank you for the answer :)

@emrecalik4022 4 ай бұрын

Very cool, Libor!

@libor-vitek 4 ай бұрын

Thanx Emre! 😉

@solderjoint13 4 ай бұрын

who is the artist for your music?

@porek965 3 ай бұрын

the artist is 3p1c-h1d3r

@FinepixF30 4 ай бұрын

I put 2 cups of orange desiccant and the humidity has fallen to 10% , ambient humidity in my area is 38%.

@FinepixF30 4 ай бұрын

The u turn to close loop the filament when not in use is unnecessary, I understand the idea is to prevent humid air to get back in but since the gap between the filament and the PTEF tube is so small the amount of humid air getting in is negligible.

@BjoernNawrath 3 ай бұрын

I think the end of the filament cannot pull moisture that way.

@t.thompson21 5 ай бұрын

Great Job. I print that plane too.

@libor-vitek 5 ай бұрын

Thanks. Yeah, except for a few small things, it's a very well prepared 3D print data. And those few exceptions are why I decided to make these videos😉

@castlecodersltd 5 ай бұрын

Great job, thanks for sharing. It's helped confirm some ideas I had for mine plus helped me realise how to do the top. 😀

@libor-vitek 5 ай бұрын

Glad to hear that, thanks and good luck! 👍

@loading...893 5 ай бұрын

Cool

@markbigham6653 5 ай бұрын

What is the extended length on the gas struts?

@libor-vitek 5 ай бұрын

"Free" gas spring has length 245 mm (measured from ball point to ball point). Stroke is 88 mm.