The Waco is gorgeous!!! And the engine in the Zero sounds real good.

That Monocoupe !! NICE !

Thanks man. Always love seeing your videos and those beautiful planes. Take care brother.

Thanks for sharing…love these events…love your video skills!

Finally!!!! I’ve been waiting for some new footage. Love your channel, you do a great job!!! Keep up the great work! Until the next video….😉

Thanx Andy!!

Great video Andy thank you for sharing there are some beautiful birds flown In pretty terrible wind😊

why in god green earth is there a fence on the end of the runway.

Great vid, Andy . Can't wait for part 2!

Brave souls! Our first event was about the same. Great turnout and about 200 planes. Gorgeous 75 degree day with atrocious winds that kept most smart people grounded. I lost my Seagull Decathlon about like that J3 Cub when a gust of wind hit at the wrong time on takeoff. Was lucky to have an identical spare in the box at home. Keep'em coming Andy!

Good video Andy with the tough conditions.

Hi Andy. Sorry i missed this year. I will be at Ghoshen end June. I have tent reserved if you're plan on attending and need a spot. Im bringing my new CARF P47 plus two other planes

Awesome flight man. Beautiful bird, great piloting!!! Thanks for sharing.

I always learn new tips and tricks from you Andy!

Pop in the xjt module and BOOM, now you can use your old receivers 😊

Hello andrew my dad has a byron zero and i was wondering if you knew where we could find a set of byron retracts not robart i think i saw you have a byron zero

Did you paint that whole plane and sheet it all in a full I. Everything then paint that whole plane. If that is paint man that's a beautiful plane wish I had the patience to build a beautiful painted plane like that. I just finished a 35 percent scale extra 300 and I sheeted it all in and painted it using ppg paint and 2k clear which is a high gloos hard sealing mirror like finish gloss clear coat thats a two part clear and its glow fuel proof I foind out. And I clearcotwd the vynil graphics over as well. But trying to sheet in and paint a plane yours size and smaller is alot more work and sanding cause of weight

I’d like to see you put the chipmunk thru the paces like that flight. Nice flying Andy

ive seen a lot of ppl miss the boat on the cowl air intakes. You need to drill around the intake and pop out the center. Take a look at the full size chipmunk's cowl. People wonder why they cant get a good engine run because they dont have enough cooling. The math is the area of the air outlet should be double the air intake.

Weight please?

Elvis lives and flies RC planes, nice!

Nu inteleg de ce trebuie sa ragai de fiecare data....numai porcii fac asta .... tu vrei sa zici ceva ? sau e o probelema de cultura prin care tu vrei sa ne transmiti respectul si politetea ta pentru noi si in acest caz imi cer scuze. Totusi acest zgomot este asociat cu porcii. Always burp?????? is it a noble sound in the english culture or the highest statement of respect and apreciation for viewers ....witch it is mostly pig associated or I had really bad understand of the meaning and I am humbly ask for your forgiveness. For some cultures this means a tres mal éduqué gars .... So sorry but I wil not go further with this. Bonne continuation et meilleures appréciations pour votre professionnalisme."I am humbly apologize for all an above .... "Me and reading not going well" says everything. Mes excuses

Incredible, I come from your other video, that of the Carl Goldberg Sukhoi 26. I never imagined that I would see this video again, I saw it on VHS in the mid-90s when I was a child and now I find it here. Thank you very much for uploading and sharing it, it brings back so many good memories of better times. Greetings from Chile.

Impressive flight. In the mid-90s when I was a teenager, the person who taught me how to fly RC planes had this same Sukhoi but with the classic red and white decoration, it was the largest and most impressive plane in the club, unfortunately it only lasted a couple of flights before being injured in a crash. I never saw one of these again but it always left me with the impression that there was a flaw in the airfoil design but it was contradictory since it was a Dave Patrick design. This video clarifies to me after 30 years that this plane flies really well, I imagine it is not like the modern ultralight designs with 3D capabilities but upon landing it can be seen that it floats very well. Awesome Snaps, Tumbles and Lomcevaks. Greetings from Chile, the southernmost country in the world.

I have an X20S - I like the PRO but at twice what I paid for the X20S it is very difficult to justify. I prefer the squared-off bottom and the paddle switches but that really isn’t enough. I also prefer the side knobs to be pointing down - so much so I bought the optional knobs but haven’t fitted them - the reason is that you can’t use them with the grips fitted and I think the X20/S needs the side grips. I guess you could cut away part of the grip to accommodate the optional knobs but I wouldn’t like to do that.

Something that foam and electric will never match, beautiful birds with the sound of actual engines instead of no sound at all..

Good show and greased that landing! Keep those old ones flying!

Thanks Andy!

hard to believe that the hornet with those terrible sounding motors and fans was state of the art......Oh thank you so much turbine developers!!!!

My Dad flew in lots of scale contests and did a few Scale Masters, Scale Squadron of California and the 1/8th Air Force . My Dad was Roland Baltes

Hey, Andy. Thanks for sharing the video it was funny and enjoyable to watch. There were some good-looking models there as well. I would Like to get hold of one of the transmitters to put on the shelf. Good show 👏 👍

Great job on the resto Andy😊 The Saito 150 was not their best offering But you can work on them and get them to tune properly I could hear a slight bit of detonation during your flight at full throttle Indicating a slight lean condition The 150 was notorious for that As they actually had very high compression ! Definitely get her rebuilt and convert to Ignition You will be much happier with the performance 😊

Andy flying an electric?

24.26

This video is exactly 26 minutes too long

Hi Andy, Thanks for that video. 1988 was another year where an incident happened, but RC related and entirely my fault. I was hovering my Schluter Scout in my backyard dialing in a new gyro I had recently installed. Finally had the tail wagging eliminated and the heli was handling nicely. I came in for a landing and let the rotor speed wind down to what I thought was a slow enough speed (should have waited until it stopped). I grabbed the tail fin with my left hand to drag the heli back to where I normally takeoff. A sudden gust of wind lifted the heli just enough where the tail fin slipped through my fingers and the main rotor struck my left hand. I felt no pain when it happened, but the heli was flopping around on the ground and not responding to throttle cutoff. I took a handy towel and threw it over the heli which immobilized it so I could pinch the fuel line to stop the engine. It was then i noticed my left hand dripping blood and then started feeling throbbing pain. X-rays in the ER confirmed I had crushed the knuckle of my left index finger. I was admitted for six days on IV antibiotics to prevent an infection. The wound was left open to drain. Was in a cast for 5 months with another 5 months of rehab. I regained about 90% use of my index finger. It didn't stop me flying helis until I had the auto accident, but gave them much more respect on the harm they can cause. Hope your wife has a Happy Mother's Day.

88 oh how I long for the glow and kit days miss you 😊

This is the reason I switched to frsky from theirs begening . I was futaba, tried corona gone in to Hitec in the erly 2.4 GHz rules for me and never I had lose an aircraft because of it;;;;;;;plus a decent price

You fly extremely well! Too much talking…

Amazing!

Another great video, plane, and flight! “Curfuddle”…what a great word…I’m going to be using it!

Gorgeous. Is that servo chatter that is heard? Had me a little worried.

when america, was still america... what a pity we lost this nation in place of a blm, lgbtq, radical new age liberalism type of social order... what a pity.

Congratulations Andy! Absolutely stellar job on the build and the flying.

Makes me wish back in the day I built the Carl Goldberg chipmunk. I did get the Anniversary Cub though! Good lord, that was close to 35 years ago now maybe?? That;s a gorgeous looking plane!

Nice job. I’m turning 76 and I love building and flying R/C. This kit offering was a hidden gem of its day. Goldberg kits brought lots of joy and excitement to those of us who actually built our ships. Terry&ThePirates South Florida

Hey Andy, it's a nice-looking plane, it sounds good to nothing like flying old school. Your frysky transmiter, are they harder to add programs like elevator to flap.

awesome!

Sounded like you have a servo with major chatter?

Really nice plane sounds great.