Thank you! It is tricky but fun. I made another one and it lined up perfectly. But I kinda like the white showing on colors better. ❤
@lannlucas5212 күн бұрын
Now I’m excited to make the 10 inch spinners! Thanks
@mycupoverflows2211 күн бұрын
Yes! Thank you ❤️
@buddysmith708012 күн бұрын
You don't need to laminate. It presses beautifully without it.
@mycupoverflows2211 күн бұрын
Good to know. If I can find some more ar $tree I will give it a try!
@ledraus18 күн бұрын
Can we use a Cricut press?
@mycupoverflows2218 күн бұрын
I assume a Cricut auto heat press would work the same. I do not have that press. I do not recommend a Cricut easy press though.
@sjsechrest4320 күн бұрын
Thank you so much for sharing this video. I too can only print 8.5 inches so I found this video very helpful and you explained how to print larger images so well. I just ordered 10" spinners so I can't wait to try this method.
@mycupoverflows2219 күн бұрын
@sjsechrest43 You're welcome! I'm glad it was helpful!
@elliswonderland197120 күн бұрын
How do you get it to 300dpi, because the images i get from spark ai are less lower than 300dpi.
@mycupoverflows2220 күн бұрын
When I use an AI generated image, I typically use an image editor to clean up the image, remove the background and then upload it.
@jermainegonzalez816021 күн бұрын
How do you make sure the front and back are even with each other or center the same? Thank you
@mycupoverflows2221 күн бұрын
I can see through the paper. Sometimes I crease the center of my image as well, to help center on the ornament- just a light crease though, or it will show when pressed. Hope this helps.
@marielladonkers56621 күн бұрын
Beautiful result
@mycupoverflows2221 күн бұрын
Thank you! 😊
@deborahm712126 күн бұрын
Okay I have the same HTVRont tumbler press. Did 3 tumblers the other day had some ghosting around the top and bottom. Looking at other KZfaq videos they suggested you did not have to use the shrink wraps however I see it worked for you. I will try after watching your video. Thanks Cindy!
@mycupoverflows2225 күн бұрын
@deborahm7121 I had heard people say not to use the shrink sleeve too, but I have such good results in the air fryer with them that I thought - what the heck, give it a try! I was very happy with the results! Thank you!
@deborahm712125 күн бұрын
@@mycupoverflows22 okay thank you so much ☺️
@mycupoverflows2225 күн бұрын
@deborahm7121 you're welcome!
@gerrywolfe254928 күн бұрын
Very cute. Thanks for the great tutorial.
@mycupoverflows2228 күн бұрын
@@gerrywolfe2549 thank you! ❤️
@karenr226Ай бұрын
my word is not allowing me to move after through. its still anchored. frustrating
@mycupoverflows22Ай бұрын
@karenr226 Sorry to hear that. How big is your design? Do you have a large file with a lot of blank space?
@AlabamamobilewebАй бұрын
Great video using Word. I use Word for all my designs. Thank you for the "shape" tool in your video. I typically create my designs in Canva at the 2.75" measurements and just save and use the insert picture in world. But I'll be using the"shape" tool to make sure the design fits.
@mycupoverflows22Ай бұрын
I'm so glad I could help! Have a great day!
@brittneyeasley1927Ай бұрын
Thanks for this video. In the beginning everything was working well, but now I'm seeing issues withsaving the image and printing it out. It's now printing as a pdf.None my sizes are correct.
@mycupoverflows22Ай бұрын
@brittneyeasley1927 When you go to save it, make sure you save as a Word document, not pdf. When you save your images, save as png.
@breezyjoy7309Ай бұрын
Hi, I wonder what word document yours is as im in the 🇬🇧 and im doing the correct inches, then having to downsize onto work. Still coming out of my printer larger 🤦🏼♀️ back to the drawing board! 😅
@mycupoverflows22Ай бұрын
I use Word in Microsoft Office 365. Check your printer settings to see if you are printing at 100 percent or maybe 125 percent, etc. It has to be a setting if your prints are not coming out true to size. Hope you can get it figured out. 💙
@matthewlawson941Ай бұрын
The hat heat press looks great! Thank you for your sharing!
@mycupoverflows22Ай бұрын
You are so welcome! It Works so well!
@lindaheidecket3597Ай бұрын
Where do you get the charms
@mycupoverflows22Ай бұрын
I got them on Amazon. Link in Description. Thanks
@lindaheidecket3597Ай бұрын
@@mycupoverflows22 thank you those are really cute and for the glue tip.
@mycupoverflows22Ай бұрын
@@lindaheidecket3597 you're very welcome!
@gerrywolfe2549Ай бұрын
Thanks for the great video. I tried to use the lint roller & it let residue on the spinner, any suggestions on how to remove the residue?
@mycupoverflows22Ай бұрын
I use coffee filters. They are lint free and work well too. Hope this helps ❤️
@mycupoverflows22Ай бұрын
Rubbing alcohol works too.
@melaniemartin6785Ай бұрын
Thank you for sharing, love this item!
@mycupoverflows22Ай бұрын
Thank you! ❤️
@cindigiannantoni6255Ай бұрын
Thank you!!
@mycupoverflows22Ай бұрын
Thank you ❤️
@kathybono9397Ай бұрын
Very nice spinner. Make sure you only mirror one of the printouts or it won't look right when it spins.
@mycupoverflows22Ай бұрын
Unless you have words on it. Thanks
@KatieDuerLandals2 ай бұрын
Love how you show the VERY BASICS. I always seem to get caught up on the simplest little things. Thank you!
@mycupoverflows222 ай бұрын
Thank you. Glad it was helpful!
@emeraldjdesigns2 ай бұрын
Thank you, this was so helpful
@mycupoverflows222 ай бұрын
You are welcome!
@stevejacobs46152 ай бұрын
how can I flip or mirror my image?
@mycupoverflows222 ай бұрын
To mirror an image in Google Docs, on the “Drawing” window, click Actions > Rotate. Then, to flip your photo horizontally, click “Flip Horizontally.” To flip the photo vertically, click “Flip Vertically.”
@mycupoverflows222 ай бұрын
Hope this helps.
@user-sc1od5rc4k2 ай бұрын
Great idea!
@mycupoverflows222 ай бұрын
Thank you
@user-sc1od5rc4k2 ай бұрын
Great video. Thank you
@mycupoverflows222 ай бұрын
Glad you liked it!
@user-sc1od5rc4k2 ай бұрын
Looks like it works good. They are less than cricket
@mycupoverflows222 ай бұрын
Thanks
@MetalTransstaff2 ай бұрын
I love htvront.
@mycupoverflows222 ай бұрын
Me too!
@MetalTransstaff2 ай бұрын
I needed that!
@mycupoverflows222 ай бұрын
Thanks
@MetalTransstaff2 ай бұрын
Awesome video. Thx
@mycupoverflows222 ай бұрын
Glad it helped!
@teresagarber33612 ай бұрын
I agree, your tutorials for Canva and Word are the best I've seen so far. I searched and searched when starting to make wind spinners and was ready to throw in the towel. I found one where everything was in Word but yours is also a super tutorial! Thank you!
@mycupoverflows222 ай бұрын
Thank you! Glad it helped!!
@empresst30842 ай бұрын
NICE!
@mycupoverflows222 ай бұрын
Thanks
@rn57132 ай бұрын
Is there any way to avoid the light/faded line that goes across the spinner where the two pieces of paper are taped together? It's not so noticeable on light colors but is really noticeable on the darker colors.
@mycupoverflows222 ай бұрын
There really isn't. The only way is to get the paper totally lined up and tape all the way across the backside with heat-resistant tape. No overlapping of paper. I overlap slightly usually. I get best results this way. Hope this helps!
@MetalTransstaff2 ай бұрын
Great video. Thanks
@mycupoverflows222 ай бұрын
Glad you liked it!
@dewpisces823 ай бұрын
I'm less then a month in and I'd yet to discover that I could get mockups from CF (you're a lifesaver). WooHoo I won't have to buy them anymore, thank you so much for sharing... it's truly appreciated!
@mycupoverflows223 ай бұрын
Thank you! ❤
@sally9693 ай бұрын
hello what version word is this? mine looks different
@mycupoverflows223 ай бұрын
That version was on an older laptop I don't use anymore. I have a subscription to Microsoft now and Word is included. Still very similar. What features are you having issues with?
@mycupoverflows223 ай бұрын
Microsoft 365
@anelvanrooyennelspr3 ай бұрын
hallo there! can i use my converted epson printer to print on sublimation paper and then bake in airfryer read somewhere that you can only do it with sawgrass or other proper sublimation printer. please advise
@mycupoverflows223 ай бұрын
Absolutely. I use an epson eco tank 2760 that I converted to sublimation by adding sublimation ink. Do not put the ink that comes with your printer in. Must be sublimation ink. Any epson eco tank will work. Watch my other videos for more tips! I use htvront 125 sublimation paper the majority of the time now. I have used this same printer for 2 years! I have another on hand for "just in case" but I have not needed it yet! Welcome to sublimation!
@gerrywolfe25493 ай бұрын
Thanks for the great tutorial & idea.
@mycupoverflows223 ай бұрын
Glad it helps! Thanks!
@cindigiannantoni62553 ай бұрын
Thank you! Very nice! Love your designs as well. One question, if you use the air fryer, is it like the ovens, that you should not use them for food afterwards?
@mycupoverflows223 ай бұрын
Thank you! Yes, that is correct. I do not use this convection air fryer for food.
@lexlyahsjourney72524 ай бұрын
Could explain it more on the end
@mycupoverflows224 ай бұрын
What do you need help with?
@AliceMarie-uo3lx4 ай бұрын
You are the absolutely best at explaining this. I have looked at so many videos and still came away confused. With your clear instructions, I was able to get it done on the first try. Thanks, thanks, thanks.
@mycupoverflows224 ай бұрын
Awe! Thank you!
@beckyzayas57494 ай бұрын
Can you exxplain a little more on how you print from Words?
@mycupoverflows224 ай бұрын
I have many videos on my KZfaq channel showing how to use Word. Here is one kzfaq.info/get/bejne/e8V1iJCW0LCxm2Q.htmlsi=S3-sOHkn2od_6UpG
@lennellhaley4 ай бұрын
Is Microsoft words free or do you have to pay. I need help I can't get my pictures to cover the 20 oz tumbler n I can't get my words to insert. I am very new it's hard I keep looking over n over at the video n I'm not getting it. I have an Epsom ET-2803 ECO tank printer. Can someone help me please it will be greatly appreciated
@mycupoverflows224 ай бұрын
Yes, Microsoft Word is not free. Be sure to set your margins in Word to low enough so you can get the full design on the document. Hope this helps.
@beverlymackenzie60584 ай бұрын
Thank you so much for this! I usually use Silhouette but lately have been having sizing issues, this helps immensely. Quick question--why do you emphasize more and emphasize thin lines? Does it do something "extra"? Again, thank you for doing this video!! 😊
@mycupoverflows224 ай бұрын
Glad it helps. It gives a crisper image for me.
@ezra15624 ай бұрын
👇 Promo sm
@mycupoverflows224 ай бұрын
Thanks
@user-sc1od5rc4k4 ай бұрын
Great video. Thanks for sharing
@mycupoverflows224 ай бұрын
Thank you!
@lindagray22175 ай бұрын
Do you know how to wrap a 20 oz tapered tumber...I cannot find any tutorials or direction for this.
@mycupoverflows225 ай бұрын
There are templates you can get for 20 ounce but my printer isn't big enough to print them. That is why I do tapers this way.
@ireneziemer86535 ай бұрын
I can't figure out how to print an 11 by 18 sublimation from a Chromebook using Google Docs!! HELP?????
@mycupoverflows225 ай бұрын
I am not familiar with Chromebook using Google Docs. My printer will not print that size. I can only print 8.5 x longer lengths. Hopefully someone else can answer your question here.