Жыл бұрын
Пікірлер
@ZacharySmith-iw3zn 11 күн бұрын
I've completely stripped the bolt, is the any alternative way of refilling the trans fluid
@charlessparkes7599 10 күн бұрын
If all else fails to take burred filler plug out use a chisel and hammer, have seen them use this method and it is out in 3 minutes. Take it to a mechanical workshop if you don't have a hoist to do it and let them do it cheers.
@leonardhandzlik6008 13 күн бұрын
You almost backed over the dog, Mate.
@ragingbull1267 16 күн бұрын
Need to interlock those blocks, its just going to fall over.
@charlessparkes7599 16 күн бұрын
Wrong the blocks are heavy enough to be stable been up now for years
@SuperFredAZ 21 күн бұрын
there's a better way to do this by getting the memory saver with an OBD connector. Unless the memory minder has a diode in it, it is potentially dangerous for the batter to be placed across the 12 V battery, lots of current.
@catrinblack8097 24 күн бұрын
Evictions are a horrendous thing. Abandonment happens afterwards, and what is left is a ruin.
@user-dv2cg5or4h Ай бұрын
this s better than the olympics.....and oy you were doin this when we were all getting locked down and losing our jobs?? i thought the whole world was mental in 2021
@Patritz Ай бұрын
Thank you!
@dennismoore1116 Ай бұрын
Looks like a great idea. Cost a few bucks more than a scrap metal drum, but pretty much permanent solution. Also nicer looking vs an old rusty metal drum.
@tedakers4406 Ай бұрын
Just the design idea i needed, really having trouble finding burn barrels in my area but this looks like a great idea. Thanks so much for this information.
@Zeek800 Ай бұрын
If you have a Gooloo or a NOCO battery booster that is capable of also charging phones, tablets etc, you can also use that in the same way as this 9 volt set up. Then you also have a portable battery booster and of course can charge your phone or I Pad.
@nexttvc Ай бұрын
I was thinking the same and I just ordered from Homedepot the blocks and going to build one
@rodhoward4417 Ай бұрын
My father and grandparents lived at 24 Higgins Street, Cribb Island. If anyone has a picture of the house that would be awesome to share it. Cribb Island holds a special place in my family's collective memories of times past.
@mcj4129 2 ай бұрын
Cool❤
@ROBLOXTHANOS 2 ай бұрын
Seems like an effective build.
@rebeccagarcia1762 2 ай бұрын
Neat idea !
@allpointstoone4346 2 ай бұрын
Very helpful 👍
@ianhamilton7111 2 ай бұрын
Charles, I'm writing a book titled "Time Travelling Brisbane vis Song. I wonder if it's possible to include the photo you used of the Gibb brothers and sister and where the photo came from. Ian Hamilton
@jeffreybright8119 2 ай бұрын
Thanks Mate, i`ve done one before ... bit tricky but just needed patience .. yes the spring tensioner needs some muscle .. lol
@TheFrostDrake 3 ай бұрын
He says sturdy yet he stacked them on top of eachother rather than interlocking it. Making the seams not be straight up and down where one heftuly stick bouncing in could knock down a wall.
@heymargaretlook 3 ай бұрын
mate it's the weight of each brick that keeps it sturdy, does not need to be interlocked and not going any higher, you wouldn't know you never made one, never had the problem's you're making up,
@user-to6my7kv7w 3 ай бұрын
So enjoyable funny and very like Betty book fabulous
@heymargaretlook 3 ай бұрын
thanks Julie.
@stevehall234 3 ай бұрын
Clever ❤
@heymargaretlook 3 ай бұрын
Cheers
@alittleunhinged 3 ай бұрын
Just brilliant 👏 very cool. Had a smile the whole time. This could go viral
@heymargaretlook 3 ай бұрын
thanks so much for your support.
@stevenminor2241 3 ай бұрын
I love my Lincoln mark 3...
@Shazza.D 3 ай бұрын
Hi have the TV do you know how to add other apps like Kayo or Disney? I can’t see the sense of having a smart tv that you have to stream off your phone.
@lynthom9361 3 ай бұрын
Would you know if the set up on the Greenfield / Cox , Fastcut 2 mower ( last Greenfield made by Cox Aust ; before being made in China ) is the same ?
@alexmortensen3833 4 ай бұрын
Thanks very much. I'll follow your instructions and see if that fixes my problem. I imagine it will.
@mrdobalina3451 4 ай бұрын
Do a jump 😅
@SunnieSnell 4 ай бұрын
I inherited a ?maintained geenfield ride on very similar to yours and you have taken the mystique out of the foot/clutch controls. Also ta for taking off seat as i have only maintained the motor/blades. I see belt change coming . LOL
@continental_drift 4 ай бұрын
Yes, Vice Grips are like having an extra pair of hands. You're not wrong about having to mow the grass more often. It's starting to cost a small fortune in fuel.
@ricardoreal28 4 ай бұрын
What a beautyful assitant you got !! 👍
@Andrewkafp 4 ай бұрын
They were very expensive in those days. About $100.00 That was a week's pay in 1969 Now bikes have everything and still $100.00
@Saltbearer 4 ай бұрын
Great job mate, thanks for the info!
@woodworkservice-com 4 ай бұрын
Buy a trampoline spring puller. Couple of bucks where you buy trampolines.
@manuelvarelagarcia665 4 ай бұрын
Gracias por compartir conocimientos.
@ianburns3850 5 ай бұрын
Thanks helped me sort my problem out
@johnsonwithat2322 5 ай бұрын
Which one is for the horn because my horn keeps going off.
@heymargaretlook 5 ай бұрын
I am led to believe it's in the bottom row ? just take the wire off the horn itself might be easy.
@johnsonwithat2322 5 ай бұрын
@heymargaretlook yeah i took the horn relay out from under the bonnet. That shit was embarrassing driving home 😂
@Dyverze25 5 ай бұрын
Mate all day I’ve been trying to find the drain plug to re-fill the transmission fluid. Nothing online, nothing in the owners manual. Would you know where the drain plug is for a 2009 Falcon FG ? Automatic transmission. XR6.. just worried I pump the fluid into the wrong place 😌
@heymargaretlook 5 ай бұрын
There is no drain plug on these model Fords you have to take the pan off, see my is leaking in this video as I have undone the pan bolts a little to drain some fluid off to add an adaptive to do a total fluid replacement you need to take the pan off and best to put a new kit in as well cheers.
@chrisgilbert7877 5 ай бұрын
thanks for putting up the video
@bilbottles1339 5 ай бұрын
Thanks mate, great vid
@justincrawford1974 5 ай бұрын
Very helpful- I was about to give up after rolling around the shed floor for a while. So that bearing number is 6203DDUNR (NSK)? Thanks
@adriankerri890 6 ай бұрын
A piece of timber that fits your hand,drill a hole then push a 4 inch nail through and then bend pointy end in a U shape and then you have a spring puller. Good video BTW easy to follow.
@petergiourelas3753 6 ай бұрын
Cool i have one too and im 58
@simonchambers2321 6 ай бұрын
This video has been a big help. Just tried this out when replacing my belt today. Cleaned it all up and it seems to not want to stick anymore. Thanks for the video.
@simonchambers2321 6 ай бұрын
This video helped me a lot. Belt broke yesterday, no time to get it in the shop. Just bought a new belt off them this morning and fitted it myself. Saved time and money. Just got the mowing finished.
@robertgeorge4064 6 ай бұрын
I’m here for the dog.
@edpilson8484 6 ай бұрын
you did not say how many blocks required?
@heymargaretlook 5 ай бұрын
30
@Stormnut1 6 ай бұрын
Looks like the cutter belt has flipped over on its back which it shouldn't be on the actual cutter pulley.
@heymargaretlook 6 ай бұрын
It's stretched that why it was replaced.
@fabelvis 6 ай бұрын
Btfl restoration. Exact same Colour as mine which I would Like to restore. Where did you find the front rack with lights
@heymargaretlook 3 ай бұрын
watch ebay or FB pages
@bartnettle 6 ай бұрын
yeah good review, big wad of keys will eventually lead to ignition replacement
@mattwalsh1558 7 ай бұрын
Just picked up a one owner withe 155k documented kms. The hot water worked a treat. Thanks mate!!