3 жыл бұрын
Пікірлер
@Rusty_Nickle 12 сағат бұрын
I agree. I have done more wrenching with cheap harbor freight tool set and probably the cheapest welder you can find out Amazon then most of these guys preaching about the expensive brands have ever done. I know I'm late to the party but this was an awesome build to watch. All it takes to start a project is a little bit of know-how. The knowledge and skill comes with time.
@terrywepner4002 Күн бұрын
Great information!! I just found your website. I am very glad that you have components for these cast iron engines. I have five wheel horse tractors that I am responsible to keep running. Thanks again I will be ordering some things soon!! Keep up the good work!!
@nopriors 4 күн бұрын
So on the Kohler KT 17 the only way to adjust the gap is by grinding the stems?I have no adjustment screws on mine.
@80cheyenneblazer 12 күн бұрын
Hey my name is Chris and I watch your videos on the K-series Kohler's and instead of replacing the whole carb why not just put it in an ultrasonic machine for carbs and or just clean up the points and condenser, cause me myself I like to keep everything original from when it was built. Cause you can almost always get kits and carb gaskets from online or a Kohler dealer.
@haroldwonder446 14 күн бұрын
Thanks much for your video. I have to change two new rear tires 23 x 10.5 -12 inch and do have a small tire changes which I have never used because had no way to secure it, but your application has solved that problem for me. Again thanks.
@user-pr3xw3ob2f 15 күн бұрын
Just found this. I want to change a 12" tractor tire and wasn't sure the tool could handle it. Now I know. I've changes smaller tires 10" rim with no issues. Love the tool and of course price, had it for a few years. Now I can start on the 12" rims, save money and drop off time. THANK YOU.
@marilynRuhala 16 күн бұрын
Where is the starter motor fuse located?
@HonestAbe44531 21 күн бұрын
Beautifully Done.
@HonestAbe44531 21 күн бұрын
I plan to rebuild my Deere 60" Deck over the Winter. This video is bookmarked and will be studied. Thanks for posting it.
@DavidRobinson-mx6cl 23 күн бұрын
Is that the same 46" deck that is on a John Deere 180 ? Late 80s early 90s ?
@DavidRobinson-mx6cl 23 күн бұрын
Looks very similar !
@rickarmstrong4704 23 күн бұрын
Hey Norman! All is Well in the Kohler universe that Engine has the proper set of controls onboard again! Cheers! Nothing wrong with points the trouble is the condenser that evil wire is always escaping the boot never had issue with points!
@garyg1331 24 күн бұрын
I’ve got a Koehler 141 engine I broke the governor pin. Could you do a video please or show one and I can get it re-welded together if possible thank you
@mcdaniellynda 24 күн бұрын
Thank you so much Norman!
@elirenigar9357 25 күн бұрын
If the carb works, keep it. Use it. A good working old carb will always be better than new junk. Don’t just replace it because 🤷🏼♂️
@thomascooper6679 25 күн бұрын
Fascinating tractor and excellent video. Does the rear axel(s)/wheels behave as a slip differential or are they capable of being locked as is a locking differential ?
@robertshockley7339 25 күн бұрын
I have a d/r 1011699 starter generator I’m working on I opened it up the brushes had crumbled a small black wire is laying loose I don’t know where it connects it’s hard to get a close up of your video any ideas? I ordered a rebuild kit from your company it hasn’t came yet thank you, Rob S.
@seanbozich3237 26 күн бұрын
I could use some help identifying my new to me wheel horse with kohler motor then I can buy some parts for your site!!
@aw2787 27 күн бұрын
Fuckin awesome channel and website man thank you
@aarongore9274 28 күн бұрын
I built the same fel/backhoe, but from a cub cadet 129. The 12hp kohler k301a is no slouch. It did everything i asked of it. You don't have to have a 149 or 169.
@MostlyPosative-nj5ex 28 күн бұрын
Have you considered changing the name of your website to IChargeTooMuch?
@cyclebuster Ай бұрын
my k321 will not run if the points are more then .004 . it runs backwards anything wider
@Hubjeep Ай бұрын
I was just given a 1970(?) Wheel Horse Electro (hydro drive) with a 12hp Kohler that my 100 year old (WWII) neighbor owned. He passed away earlier this year. It's in pretty rough shape, but I hope to get it going. In my experience with small engines.. It's likely the carb! Thanks for the video.
@mxk250ff Ай бұрын
This guy knows nothing about anything
@philcasablanca6869 Ай бұрын
how do you bleed steering cylinder on 400 JD
@reesemolloy6109 Ай бұрын
One question on the key what is necessary to make the mower start?
@MCMorrado Ай бұрын
Can those engines also be converted to electronic ignition?
@jonathanolsen7254 Ай бұрын
Hi there Norm, Norm I am working on my 82 Ff24 Craftsman Tractor, I need some help I was rebuilding my tractor and rebuilt everything but some were I lost my front mounted PTO that gets connected to my elect clutch by belt, I do not know if someone took it or just where it is but its not with me anymore, Do you know any place that might have this part ? Also, where can I get a owner's manual for this 82 Ff 24 tractor. Love your video's that you put out there, Big Thanks...
@GOOF2ooo Ай бұрын
I just picked up a cub cadet 1650 with a kohler. When i went to look at it. The guy was explaining some of the work he's done recently. And he said he did a head gasket on it and got parts from you. I chuckled and siad i love Norman from i save tractors.
@aaronriddle5091 Ай бұрын
Interesting flail mower. I have a similar flail behind my Ford 1320. One problem my Mott Flail has the pulleys and belt on the opposite side. Any idea what belt this machine needs? thanks
@robertheinkel6225 Ай бұрын
A good rule of thumb,is to only fill the tire to the top of the rim.
@Ziggy1937Deere Ай бұрын
Any advice where to get an onan motor for an Ingersoll 4016
@outboardfixer Ай бұрын
WHY can't people JUST GET TO THE POINT???? Just a GREAT tutorial on wire strippers.
@sbiwpo Ай бұрын
Hi Norman, counting the lands on the balance gear you say to mark the 7'th land, but in the video you tap your pen six times on the balance gear and mark the 6th land, not the 7'th?
@danbristow7581 Ай бұрын
I seriously thought that was Mur from impractical jokers and I was getting messed with ....lol...
@TheIronDuke502 Ай бұрын
Have you updated the carburetors as you indicated in the video. I have both a 682 and a 1710 Cub Cadet tractor that have the KT17 Series 2 engines Do you prefer the thicker or thin carburetor gaskets between the intake tube and carburetor and elbow assembly? Just curious.
@Isavetractors Ай бұрын
Yes we have! For the Magnum twins I use the thing gaskets
@TheIronDuke502 Ай бұрын
@@Isavetractors The 682 Cub Cadet that I am currently working on has one of the aftermarket carburetors that bolted up very nicely with the exception that the choke tab is turned totally wrong for the existing choke cable to work. Also, the actual hole in the throttle tab had to be drilled out to allow the Kohler linkage bushing to fit. The Walbro replacement carburetor bowl gasket that I was trying to use will not stay in place long enough to attempt to install the larger gasket that fits around the float or else I would have re-used the Walbro carburetor rather than going with an aftermarket carburetor. I removed the engine tins on both sides of the engine to clean out the trapped debris and crud which was horrible. I am totally surprised that the engine didn’t fry itself long ago.
@ChuckOwens-wp9cz Ай бұрын
Hi. I bought a JD 400 in August and it was recovered with a Honda Performance 670 but I don't have deck.A 60 in. Decks hard to find so I'm gonna rig up one of my own to cut grass. Maybe a 3pt finish deck. Thanks
@Cheemzs Ай бұрын
Hey is the stuff on your website still for sale
@Isavetractors Ай бұрын
Yes. Still doing strong business
@steverone7623 Ай бұрын
Where ya been
@ockamsrazr Ай бұрын
You would not happen to know what the part number is for that front driveshaft with the quick lock mechanism would you? I have the same deck and have jury-rigged that female spline end onto the PTO spline because the quick lock has broken. Thanx, great stuff.
@dreamcatcherdb Ай бұрын
Hey Norman, that’s a great video on the John Deere 400. I just picked up a Deutz Allis 1920 which you probably know is the same as a simplicity SunStar 20. I begin restoring it and quickly found out that it has a lot of the same parts as the John Deere 300 and 400 series tractors of the same vintage. It would be great if you could do a video that compared the John Deere and the simplicity tractors of that size. Keep up the great work thanks
@dennistrufyn9110 Ай бұрын
Do you not check and inspect the ACR mechanism on the camshaft during overhaul?
@bvr1962 Ай бұрын
I stumbled across your video and noticed Bracket machine I to am from Maine it really is a small world
@jeffreythiel5315 Ай бұрын
I have a 520 H that needs a drive belt they sent me an 83 inch but it seems like it’s short any recommendations for a cutting deck belt for a 520 H with a 48 inch deck
@c.torino2479 Ай бұрын
Just picked one of these up. How do I adjust the hydros to pick the plow up higher?
@ajmontgomery4564 Ай бұрын
Wheres that hole on tthe tractor itself, never showed where it was, just picked up a Jacobsen 1200, will not fire at all, cranks and backfires even after a lil fuel in plug hole.....
@jimg2885 Ай бұрын
Can I ask what fluid you use in the loader? Hydraulic fluid or ATF ? Also is the large nut on top of control area the fill and fill to the screw on the rectangular tube? Thanks in advance..
@FJB752 Ай бұрын
What is the spec on the belt tension arm stop plate on deck?
@cottydry Ай бұрын
Good video but I certainly wouldn't replace a known good working OEM carb with aftermarket. Maybe just a good cleaning and an OEM carb kit.