I had some of these clear dividers from 12x12 paper that I cut down. You can use any sturdy material you like - thicker cardstock or cardboard, pressboard, plastic, etc.... These are the ones I had on hand: amzn.to/3Acqw44

Onyx Black is the Versafine black. Nocturne is the Versafine CLAIR black. They are both equally good. They are slightly different, but both a good, solid black. Personally, I prefer Nocturne as I prefer the VF Clair ink pad cases. It keeps the pad nice and sealed, meaning I don't have to re-ink it as often! Except for Onyx Black, it seems that most stores carry the VF Clair line of inks. So, if having the same form factor/ matching set is important to you, I'd go for Nocturne. Here are some affiliate links to places I like to shop: Dick Blick: shrsl.com/4m7uk Scrapbook. com: shrsl.com/4m7uj

Yea!!! So glad to hear it! When you need to clean the adhesive from your stencils, check out my cleaning video: kzfaq.info/get/bejne/jNChmdqkq83Toqs.htmlsi=tLq7fcCg__BHBDbI

Yes! Definitely try it out on your own first. It’s not 100% like using a gel press, so don't expect perfect pulls. But it works great for abstract and distressed looks. Have fun!

Great question! However, alcohol will make this water & latex style glue "curdle". I actually use an alcohol bath to remove the glue from the stencils.

This is for my techniques sample book, so I wanted to create a single sample that showed the three typical washi widths. If I was doing the technique for an actual project, I would use only one width. Having the sample show different widths would help me to decide which size I want to use for my project. HTH!

sometimes it's the simplest things!!

I believe it would. In the past, I have used the Zig Glue Pen (here on Amazon: amzn.to/3vYVrz2 ) to re-glue my cutting mats. But, I think that watering down the Tombow glue and then brushing or spraying on might accomplish the same task while getting the most out of your adhesive! I would suggest taping around the edges so they don't get sticky, then either spray and perhaps brush out so it's even, or just brush on directly, then let it dry. If you're already experimenting with an old mat, it's worth a try. The glue will come off with a soak in rubbing alcohol. ( I have a video on removing the adhesive from stencils here: kzfaq.info/get/bejne/pdubibBhptiwhXk.html )

I usually only have this problem with larger stamps. Most times, a bubble won't cause an issue, however if it is, I remove and re-seat the stamp on the block or positioning tool. If it is a large enough stamp, you can roll it on to keep bubbles to a minimum. HTH!

Awesome, thank you!

I'm glad this video gave you some confidence! But, really, DIVE into your real gel plate! It is so much fun! There's not much you can do to damage it except to puncture it or cut it, so avoid using materials that have a lot of texture. Virtually nothing will stick to it permanently. You might stain it a bit, but that's ok! I have quite a few videos using the gel press, including a cleaning video, so be sure to check those out!

@@NicoleWattCreates That I will! Thank you so much for your personal reply Nicole - and your inspiration..

Yes, the cloth is damp.

Glad it helped

Glad it was helpful!

I haven't tried, but I'm pretty sure they will. You can also use Heat n Bond (also by Therm-o-web) is basically the same product. It's a no-sew fuser. You might get it cheaper by the yard (or in package) as Heat n Bond from your local sewing store (or online). The Heat n Bond Lite seems to be about the same weight. Either way - have fun!

Yes! I totally understand. I prefer the VF Clair style pads too! There seems to be more space around the edges to grab, and the pad sits up high enough that the base doesn't get in the way. I also like how tightly they seal. I can come back to a VF Clair ink after a year or more and it's still as juicy as ever.

Thanks for the positive feedback.

I make my own with leftover Tombow Multi and distilled water. It works great! kzfaq.info/get/bejne/mJmJeM-ZptKag6s.html

I've never tried spring loaded scissors, but I'm sure they'd work for this approach to fussy cutting. Go for it! (It's just paper!)

@@NicoleWattCreates this sentence has helped me stop my perfectionism it’s one of the reasons I started paper crafting.

You can remove the powder with a dry microfiber towel. If that doesn't get it all, use a slightly damp towel. Dabbing motions can help get in all the spaces without lifting too much glitter. HTH!

@NicoleWattCreates thank you so much I appreciate your help 🥰💗

I'm not an expert in wood door hangers, but I'm guessing that if the residue is on raw wood (not painted), you could use an adhesive remover square. It looks like an eraser. Here's one for reference shrsl.com/4dag4

Hmm. I suppose if you were going to glaze over the gray, it may have the same effect. The reason we do this with markers is because we can't mix the color ahead of time like you could with acrylic paints. I always say creative ideas always start with "what if?" So, take some time to play and see if it works the way you expect! It's only paint!

I've had my mix in the same spray bottle since this video and it has yet to clog! I don't do any kind of special cleaning of the nozzle or anything...

hmmm. yes, I know that feeling well! I'm glad these tips helped you out. You can also use them with brushes and paint with them.Of course, the Oxides would give you a chalky finish, but the regular ink sprays work wonderfully as watercolors!

maybe, however I find that the areas without foil aren't actually sticky afterwards. The heat-n-bond, or hot melt sheets simply cool to a glossy finish - no stick!

2.5" x 3.5" about the size of a credit card

Yes - it's water-based, so you can add it to any other water-based medium to create shimmer. Have fun!

Hand sanitizer works equally as well! I prefer the rubbing alcohol because I can use it for a few stencils - it's more economical. But, I totally get the fumes issue too!

You're welcome!

I'm glad you like the idea! You'll be seeing layout ideas everywhere now!

Thank you so much 😊

You bet!

Yup - it's the same thing! I recommend the lightweight interfacing, but any you have should work!

Also frabic spray adhesive works. Lightly spray cardstock and process as normal.

I just did the double sided interfacing, it worked great. I also left the clear film on, so the sticky bits, spaces stay covered.

@@LDruma awesome! Thanks for sharing! I found that I was able to remove the clear film and it was not sticky afterwards. Though, it took a bit of muscle to rip it off!

@@LDruma Ooh! Great tip! Thanks for sharing your experiment!

You are so welcome!

You're welcome!

Glad it was helpful!