Nice, but what if your old house floor pipe is in a straight line to your sink hole?
@bingobunga89955 күн бұрын
I would honestly get a power washer and the sand blasting attachment and cover up the windows with plywood and strip it down to the wood then wire wheel and sand the wood and then hit it with some exterior grade 2k poly primer from Centurion. Edit I’d also spray on the primer and back roll it then only spray a second coat within the recoat time so you don’t need to sand inbetween coats!
@danieleffenbergerrealestat17778 күн бұрын
Great video thank you
@katharinenunn752926 күн бұрын
Where are you mounting the laser? New DIYer here so that bit would be really helpful for me. 1875 house with floors that need to be leveled.
@dandychiggins9061Ай бұрын
Shouldn't you have installed an air admittance valve instead?
@davefreeman1499Ай бұрын
You should have sanded the wood before priming.
@monkeymindmiddlewaymeditat9048Ай бұрын
1950's is the age for this pink tub
@zzubuzz2 ай бұрын
So how do I know if I've accidentally made an S trap? A: It will smell like S How do I know if I made a correct P? A: If it's a P, it's odor free.
@jackwardley36262 ай бұрын
you don't need this oil based wood primer a high quality one is much much thicker than this stuff then oil undercoat then oil gloss or aluminium wood primer which will take a extra day or 2 as its silver will need a extra oil undercoat for opacity
@yevgeniytsarkov72562 ай бұрын
Where is the vent pipe?
@rudolfart2 ай бұрын
After several tries flushing the device on the left, also with yellow lid, I took apart the large Aqua Piston Seal on the right, as this video explains, I cleaned and reseated the yellow ring seal at the bottom of the black cylinder (piston?). Thanks to the downloadable manual from the scan code, which says just to clean it FIRST, the system stopped losing water and refilling and is now working. There was not much visible gunk on either item. I took off the yellow seal at the bottom of the large pistion (to which the flush handle is connected (quite challenging), and reseated the ring at bottom of the black cylinder.
@paullorenz64572 ай бұрын
Very helpful, Thanks!
@CptCrackers2 ай бұрын
How much force to twist it? Mines feels like its to snap off
@elonmusk86672 ай бұрын
4:15 I wouldnt hire this painter.
@mbrntly112 ай бұрын
Improper installation
@VikoolyaLV3 ай бұрын
Ring is still coming back
@ngf50772 ай бұрын
Stop peeing
@nikd36363 ай бұрын
Thanks. Perfect presentation and straight to the point. Your awesome buddy
@jp4103 ай бұрын
Middle ground. Yes, thank you. It's almost always what I'm after, but it can be hard weeding through all the professional advice, which tends towards $10,000 solutions. Great video. Glad you didn't fall.
@manw3bttcks4 ай бұрын
I have a Santa Rosa Kohler and did this exact fix which worked but I'm also seeing that the big black foam 'flush valve gasket" at the bottom of the tank is also disintegrating. I've heard people have problems doing that fix because of it being hard to unscrew and then screw down the canister afterwards inside the tight confines of the tank. In my case I'm probably going to not fix it until it actually fails, since the toilet is a one piece if it does fail it would just leak into the bowl which is not a big deal whereas the same leak in a two piece would go all over the floor. Do you have any tips on fixing the flush valve gasket? The Kohler gasket part is GP83996
@tweety55544 ай бұрын
Thank you! I'm going to give it a try. This will be my first install.
@evrimicoz83584 ай бұрын
Before you attempt this, make sure to also check the little plastic vertical piece that can be turned right or left on the fill valve (in my case it was to the left of the cylinder they show at this video). That can be adjusted to the fill level and apparently mine has crept up and was letting water run all the time. It has a philips head on top for philips screwdrivers. adjust that first.
@scottzetlmaier35794 ай бұрын
Dude, cut to the Chase
@user-iu4us6hz7j5 ай бұрын
Hi on a sink a short pipe is code on a hand basin it is not eg a trap vent or a 300mm. 600mm horizon tal 30 to 1 fall
@user-iu4us6hz7j5 ай бұрын
Hi there sinks have a flat bottom discharge which it means it prime's the trap ,same as a bath
@crand200335 ай бұрын
But I heard it doesn't kill it or get rid of it. It just suppresses it for a while and then it comes back next year.
@XsoloXela19895 ай бұрын
No caulk needed for between the faucet and countertop?
@espirite5 ай бұрын
Didn't you just create an s trap after all that?
@vincentthifault79215 ай бұрын
U could have slide it out...u were not squizeed between 2 walls
@sebastian061616 ай бұрын
Mine are not Connecting to the WiFi just A Nightmare it says something about broadcast udp local Network
@realexperiences87486 ай бұрын
I'm pretty sure that's still an S-trap. You need some kind of vent where the elbow that turns down is. At the very least, using a T instead of the down elbow and putting an air admittance valve on the top of a T.
@bradjenkins9323 ай бұрын
It's an unvented P trap
@thomasbouyer83016 ай бұрын
It's February 2024, and you described my issue to a "T". Thank you! I was able to take your knowledge and $7 and fix my toilet in under 4 mins (and I am NOT a plumber😂).
@emiltchilev90266 ай бұрын
Wrong! This is still S-trap and will siphon the water. I hope you are a DIY enthusiast. Not serving customers.
@KingKatura6 ай бұрын
I wish my kitchen sink was just one pipe, We like 4 under there, garbage disposal & the wierd way the old metal pipes were hooked
@billjewell55286 ай бұрын
What did he solve by doing this?
@jonathanklopf75817 ай бұрын
I can always tell a novice from a pro by the terms they use to describe the parts they are using," connection hub"?
@34stzoo7 ай бұрын
2:25 You can use a grinder with a metal cutting wheel so you can cut it into four sections so you can remove it in pieces. The sledgehammer is doable, but you will have a huge mess to clean.
@34stzoo7 ай бұрын
1:10 Resurfing costs a lot of money and only last 2 or maybe 3 years. Not worth it!
@34stzoo7 ай бұрын
I can't imagine the installation of that tub.
@heidimccord58337 ай бұрын
Thanks. I now feel like I can get this old beast out of my second floor without having to pay to get her done.
@beglitchery7 ай бұрын
This is fantastic and great timing I found it. I have a 1892 house that has settled and I’ve got a 3 rooms to level and reinforce and I thought those would be two separate things. This will kill two birds with one stone
@ostephytv8 ай бұрын
Thank you for this video!! Made for an easy fix it myself task!
@beyondalpha10728 ай бұрын
Great video, mine lasted 5 years handle just broke clean off, was always hard to turn all the way off :( i think i paid 90 bucks at Home Jewpoe
@NuFlush18 ай бұрын
I just keep replacing Seals. kzfaq.info/get/bejne/qJmegNBosNOnfGg.html
@Jae31st8 ай бұрын
Do u have dimmer on the side of your light switch? If so what happens when u use the dimmer?
@caribbeanbound83578 ай бұрын
S traps have been used forever and now people act like your house will collapse if it is used. Bizarre
@mejicanito8 ай бұрын
Need the sand tee with a vent on tub your not doing a waste arm inside the wall drain is coming from bottom up and need the stud vent unstead of using that 90 should be a sant tee just and advice Godbless
@videomejoe9 ай бұрын
Thx H&P, exactly what I needed to know. Got a cracking bath room tile floor on 48 inch center to center joists see with 1 inch plywood subfloor. Tile properly installed with extra sheathing and crack isolation membrane, but no one bothered to check the crawlspace joists before install.