First timer here, the ask for comments, I am way in the beginner days. Your input an sugges are great!! My suggestion is to may e use a pencil an mark the area the camera sees that way you stay in the middle of the box? And you can erase it after.
@abebeaku836919 күн бұрын
15 minutes for 4 holes and a rope through :) Too bad i don't smoke weed, otherwise it'd be extremely entertained. Beyond all that, great tip, mate.
@ivancho5854Ай бұрын
Brilliant. So straightforward. Thanks. 👍
@patrickrose12212 ай бұрын
Good as gold pal 😊👍
@the1jamman2 ай бұрын
You can put it in a microwave for about 15-30 seconds. It makes it much easier to spread around . It also lasts a while so the paste is available to use easily in the future. I use these pastes all the time and fine them to be the best one can find
@seniorxj2931Ай бұрын
Good advice, I've been thinking of trying these and heard they're thick.
@camper12112 ай бұрын
Excellent video. I’m just starting out wood carving, and your explanations and inspiration were spot on.
@damirkukovec92632 ай бұрын
🍀♥️🙏🍀♥️🙏🍀♥️🙏
@HAFTERgames3 ай бұрын
I sold 50 of these for $20 each 😂😂😂
@cheflorenzo44913 ай бұрын
A demo would have been more beneficial than all that yacking.
@jimschaffer98313 ай бұрын
Looks good . what kind of wood do you have. Jim's wood shop.
@masoudkarimi58683 ай бұрын
paLz.wook.kit
@roseannegibson33434 ай бұрын
Really nice
@user-td5qe8xq2c4 ай бұрын
Do you need to be concerned with the core of the tree your carving on when it dries? I have found that leaving the core often but not always results in the item splitting down the road. Your thoughts on this?
@timlist41734 ай бұрын
Just found you, what carving knives do you recommend?
@susanp.collins78345 ай бұрын
Bingo!
@Watcherrye5 ай бұрын
One of the very few animals (owl) that will not kill you in Auzzie land....outstanding,,,thank yas!!
@AlirezaMoeini5 ай бұрын
Thanks very good سپاسگزارم خیلی خوب بود
@scottwright3885 ай бұрын
KZfaq's zoom feature is quite handy for seeing what you're doing.
@stevelowen57505 ай бұрын
Great job, I really appreciate the time you spent
@keithhallam54736 ай бұрын
Very good we are just beginning
@MichaelOberdacker6 ай бұрын
This looks exactly like what I need for my carving projects. I found this when searching for a wood carving clamp/vise.
@rl14916 ай бұрын
subscribed!!!!!!!!!!!!!!!!!!!
@ureasmith30497 ай бұрын
Wow! You really globbed that on. Too much waste/overkill .I assume you learnt that by now.
@GD-os8mz7 ай бұрын
Lovely. Thank you.
7 ай бұрын
Just starting carving and only have a stanley knife but Christmas is coming so hopefully there'll be knives involved this year! This was a really helpful video and I've done my first wood spirit. Many thanks for all the tips here.
@ayobali9927 ай бұрын
Really enjoyed watching your video 🤩 definitely going to be trying to carve a Owl🦉 🥰🥰🥰 Keep up with the great work 👍
@DustyTravelsBC8 ай бұрын
Thank you. What good teaching for a beginner carver. You’re really good at sharing your knowledge. I wonder if you’re still out there teaching - your videos are really good!
@DustyTravelsBC8 ай бұрын
Glad I found this! Simple and clever enough to give my old hands a rest while protecting my thighs. Appreciation from an old woman just starting to carve. Thank you!
@susanp.collins78345 ай бұрын
I'm 68 (November last year). I have just finished my first spoon. I LOVE it and think it came out GREAT but OW! - my hands are SORE!!!
@shoey648 ай бұрын
Great job but alot of the carving we couldn't see it was off camera. Keep them coming.
@nathanfisher97949 ай бұрын
I would love to make this! I have whittling knives. At the beginning you said the sticks had dried out. Do they have to be dried out to whittle them, and if so, for how long should they dry?
@terryfletcher64659 ай бұрын
I did some many years ago on a chopstick.
@jamesbessell75439 ай бұрын
I love these little mushrooms. What sort of wood are you using there. Could you recommend a type of wood for beginners who want to tey this. Cheers mate 👍
@jeandresley2759 ай бұрын
Thank you for your video. It was helpful in my quest to learn to carve.
@facundobinelli60779 ай бұрын
A nice little project for beginners like me. Thank you
@feralfreebirds9 ай бұрын
Just carving some 🍄🍄🍄& want to progress to faces & 🍄spirit's ❤😅
@LiaGridley9 ай бұрын
I was doing this with a dull knife,and I cut myself badly. No crocheting for me for a week or two. Make sure you wear carving gloves and have a sharp knife.
@kcrowe55910 ай бұрын
Thanks for the basic eye. I whittle 4 1/2 “ gnomes, there isn’t much room to do anything fancy
@Kevo2010 ай бұрын
Amazing video and project mate, Can't wait to try it!!
@srcworm10 ай бұрын
Does it have to be a tree with green bark? I don’t know what kind of trees are around my house
@SpoonsandSpirits10 ай бұрын
You need a wood that's very "juicy" and full of sap so that when you bruise the bark it separates from the wood. Happy whittling!
@mikaoj7110 ай бұрын
I did my first wood carving today -and follow your video. Don't get magical, but was fun and try a new tomorrow.. Great video. ❤
@jasoncampbell622210 ай бұрын
I only use a belt strop with diamond paste and IMO you use far too much pressure, only the lightest of pressure needed cause you're just polishing the edge and I just hang mine off a hook as they're intended. Nice to hear an English voice for a change here on YT.
@Not_So_Weird_in_Austin10 ай бұрын
It looks like you could use half the amount to do the initial coating. Nice touch on the 3 part strop system plain, 8000, 4000.
@bfoster195011 ай бұрын
Great job! Thanks for the video.
@michelegrand3921 Жыл бұрын
Bonjour, j’ai toujours beaucoup de plaisir à vous regarder pour sculpter de nouveaux hiboux dont je fais cadeau à mes amis. Vous sculptez avec ds gants anti coupures particulièrement intéressants vu que ceux que vous utilisez ne déteignent pas, contrairement à ceux que moi j’ai trouvé. Pouvez-vous me donner les références de ces gants svp ? C’est tellement rare de voir les sculpteurs utiliser de tels gants. Merci pour votre réponse. Michèle
@8360365 Жыл бұрын
Is the pencil a standard size or a jumbo
@Veniguiribici Жыл бұрын
Spectacular video. Going to give this a try
@indianatone218 Жыл бұрын
Nice little project thanks for showing, just found you so liked and subd ,Ant from Wales.
@sorrows_touch Жыл бұрын
Brilliant guide, I've just got into whittling and this helped me out a lot!
@scotthompson9951 Жыл бұрын
I went through it twice, cut for cut, and you really helped me figure it out. I feel good about this design now. Thank you!
@JohnColgan. Жыл бұрын
1st time seeing these made, though heard of them 50+ years ago. Next try to make one !!