So annoying when people smack right into the camera.... hard to watch the video with people doing that.

Do yo know abuot a 2012 seems different?

I have a 2016 Sonata hybrid like this. Thankfully the newer ones have GDI/Port injection. Even using this spray, I have the BG service done every 12-18 months. I iave before/after BG photos that went from carbon covered to where i could see the piston head markings from the factory. 👍 172,000 miles so far, no issues. Even have the factory brake pads. ! The method I do this now is I installed an oil catch can years ago (as these people should) and I spray this or Seafoam in the hose going into the intake. I had mechanics tell me it worked better into the intake than the throttle body. 👍 It gets the back of the valves better-in theory.

Thanks for the heads up on this, it worked!

Vortex links? Where did you get them? Thx

Could you send some help

YOU A LIFE SAVER! I made the exact same mistake. Thank you for this!

What did you buy? A booster?

이 바이크에 문제점은 기름통을 타고 빗물이 내려오면서 시트 아래 모든 퓨즈가 있는 곳으로 빗물이 흐른다는거 방수작업 잘 하셔서 함께 좋은 드라이빙 합시다!

thank you boss

Bro get to the point omg

After lubing the ball joints of the quickshifter, my bike shift with way less effort for the foot. It seems like a different bike now. It was very helpful, thanks for sharing this video.

Have you experienced any issues since doing this?

Mine won’t go on neutral on a complete stop but when engine is off goes like butter. What could be the problem?

Why tap in to that wire when you can just wire it to your red wire in radio. It’s literally the same thing

so what about when trying to install oem links and they are shorter than the lowering links do you recommend to elevate the front tire and keep the back tire on the ground or try to lift it up from the center of the bike like you did

I have the same problem and I know how to fix. Thanks for the video. I have a 2014 toyota corolla. I could not even get my favorite stations like Air1 and KLove. Thank you.

Hey I'm having problems with that same situation but I don't got a line and a dot to show me where to put it back to I got a 2004 gsxr 1000 and I replaced the gear shifter because the last one broke and I took it off can't put it back in its original place can you help me??😢

I saw in a comment you wrote you got it at metra store but i cant find it they are all multi cable harnesses. Im having the same issue with the radio i installed and its making me crazy since i only listen to radio. Can you send a link or something i would really apreatiate it.

Thanks very informational & helpful good video🤙🏻

Do you have the diagram for the Honda radio harness?

Oh man.. thanks.. i had no install and was wondering about the extra cable. Thanks

I don't understand why my wires are different colors than yours.

Do i need to take that thingy out to lube it or do i just spray it on there with the cap off?

Good enough for me

Can you wheelie? I’m wondering how mucher hard it is to wheelie after lowering the bike.

Hey Ross. Any updates now that some time has passed? Thanks.

Put an oil catch can if you haven’t yet. It’ll save a lot of the build up. Depending on your miles a second treatment won’t hurt in like 3 weeks. I just did my second treatment and A HUGE IMPROVEMENT from the first treatment. And if yours is a 13 and if the plugs havnt been changed change plugs with motorcraft plugs and if you got higher miles go ahead and swap all coils with motorcraft coils. Change the plugs every 60k. A guy I know changes his once a year. His truck runs like NEW and it’s a 2011 with 195,000 miles

Great video !

Grazie di tutto mi hai risolto un grosso problema. Saluti dalla Svizzera

Many times its caused by aftermarket LED headlights and LED turn/ brake bulbs aswell

this video does not tell how the antenna was a amplified antenna and needs 12v to operate. BOTTOM line these radios r great. BUT if want FM or AM these radios do not deliver NO matter what antenna is used even if you use a 10foot whip the reception will increase but as soon as you start moving signal loss to the point of road rage

honda ridgeline, is that how you found out you were gay

Promo'SM

I did it with two units with no success, connection diagram on one of the unit says the same as you said in the video, to connect a wire (orange in my case) to ignition in order to power the antenna. But no luck, and I have no idea what is wrong. Both units are okay and all other features works just fine.

my unit has sound but when I switch to FM I can't hear no static noise even without the antenna connected

Have you cleaned the 3 map sensors yet? I cleaned them but haven't pulled the trigger on this project yet. I also swapped out my pcv last week, super fast and easy preventive maintenance.

Do you lose signal when you drive in the city?

Thank you so much man ❤

Thanks it helped a lot!😎

Where did you get it \

Thats a bad ass R6 man 🔥🔥🔥

Get to the fkin point

still bad reception

“I like to get to the chase” doesn’t get to the chase first 3 fken minutes repeating the same thing over and over

What is the name of the cable?

This video is fantastic! It worked on my 2007 Honda Odyssey with a cheap Chinese head unit and now the steering wheel controls all function. The wire colors were different but the plugs were the same so I went by the pin numbers and it worked. I couldn't find this information anywhere else. Thanks!!

I used the Friegromech ISO harness it connects straight to the car harness and ISO connector on the back of the radio and you don't have to do all those connections you did, and with your info I got my SWS to work thanks.

Were you ever able to get the talk and back button to work?