Pace forks just look amazing. Nicely done. Can’t wait to see the Orange!
@davidlast46829 сағат бұрын
Came here from area6. Awesome vid, mate! Love your space!
@BikeShedBoy9 сағат бұрын
Cheers mate 👍 still on my dads live stream now. Thanks for the support. Very much appreciated 😎
@MonkeyShred12 сағат бұрын
£175?! Geez. I think I’m sitting on the beginnings of a gold mine then 😅 Catching the thread was the most annoying part I did on mine. With new elastomers you really had to compress the fork and hope it stayed aligned. Doesn’t look like they greased them up much prior to selling them did they.
@BikeShedBoy12 сағат бұрын
100% going up in price depending on condition mate. The elastomers fitted are light ones so easy to catch the threads , and they definitely need stiffer ones. The elastomers were so dry and not as clean as expected but not bad at all for the price. Will upgrade when we find a bike for them. Just looked at your channel and found your video, so I will give it a watch later, mate 👍
@accessarea613 сағат бұрын
Cool I love how those types of suspension look so simple but very efficient
@BikeShedBoy12 сағат бұрын
It's not so bad with the forks, but look and work amazing 👍
@GreenFingerHandyman15 сағат бұрын
They look amazing, just a question: Are they backwards fork as I noticed the wheel tabs look the wrong way round?
@BikeShedBoy14 сағат бұрын
@GreenFingerHandyman yes they are supposed to be like that, mate. Check out the video 3 bike farthers Day special video. The orange had a set on, and so you will get a clear idea of them great forks. My mate saw them and wanted a set. Hence, this video 👍
@SHWELL113 күн бұрын
I really like that hat you have on, and the bike is cool too.
@BikeShedBoy3 күн бұрын
Cheers, mate. I appreciate that. Check out some of the other bikes I have built. They are super cool. Thanks 👍
@MrJUNE2245 күн бұрын
I was building my bike with you but I had an another bike that I bought built. So I follow u and looking at my other bike. That long piece of metal that you didn’t used, it is the front brake lines. Before you put the front brake. You add that line in the same hole as the fender. I was following you and when I saw those extra pieces, I looked at my other bike and saw brake lines. If you look under the handle bar you will see tiny hole on each side. Right of left brake. If a person said they can’t do this bike, even watching you, must be dumb or has some huge hand cause those screw are very small. I’m an amputee, I only have 1 hand and I built it, With your help. It was fun hanging out with you.
@BikeShedBoy5 күн бұрын
Mate, I absolutely love your comment! I struggled with two hands, so I hat comes off to you, my friend. I absolutely love it. You're a legend 👍
@philt_zee6 күн бұрын
Great video mate! Didn’t know you were filming during our ride! Really enjoyed it, looking forward to doing it again tomorrow👍. BTW, shave those Sasquatch legs!!!! Also, thanks for the channel plug❤
@BikeShedBoy5 күн бұрын
🤣 I am also looking forward to our Monday ride. Hopefully, beat the time and stats from the last ride. I'll be keeping the sasquatch legs 😎
@philt_zee5 күн бұрын
@@BikeShedBoy ah FFS!! Get the hedge cutter out!!!😂
@robertmcfadyen91567 күн бұрын
What computer did you use on the. BMC for the riding session ?
@BikeShedBoy7 күн бұрын
Garmin 510 mate it's an old one but a great little thing. Also has maps and all sorts. I have also used in on the mountain bikes from time to time 👍
@robertmcfadyen91567 күн бұрын
@@BikeShedBoy Does it hold all the world's maps in it's memory , or retrieve them as needed via internet connection with a phone , or via stand alone GPS connection ?
@BikeShedBoy7 күн бұрын
@robertmcfadyen9156 it has GPS connection. I don't know about world maps as I have not used it outside the UK. I am pretty sure it can be updated via PC.
@kevbrown71377 күн бұрын
And dont shave those legs either.... 🤣
@BikeShedBoy7 күн бұрын
@kevbrown7137 🤣 definitely don't think I am mate. Fluffy and proud 😎
@kevbrown71377 күн бұрын
Do loads of miles on the road bike... 100% tubes on road.. Tubeless on Gravel... Tubes on the Kona.... Started using TPU tubes on the road toad.. 👌
@BikeShedBoy7 күн бұрын
I agree, mate, and I am definitely thinking of going to TPU tubes 👍
@durden.tyler5377 күн бұрын
I really think the things we do vs the reasons we ride are contradictory. We ride for fitness, but we wear aero clothing and upgrade to lighter bike parts. Keep the furry legs and wear the baggy clothing for riding. More drag will make for an intense workout. I just swapped my lycra for board shorts and T-shirts….
@BikeShedBoy7 күн бұрын
Well said, mate. Definitely keeping the furry legs aswell 👍
@Willdlans7 күн бұрын
Probably get stopped them soon as I need to fly back home for a family emergency beasts driving 37 hour's tho.
@BikeShedBoy7 күн бұрын
I would rather fly than drive for 30 odd hours as well, mate. Just make sure you don't have anything illegal on you 🤣
@hamadysack31577 күн бұрын
You got that poor bike wet.
@BikeShedBoy7 күн бұрын
I did give it a wipe down after the ride 🤣
@GreenFingerHandyman7 күн бұрын
Shave ya legs mate! only way to look pro.
@BikeShedBoy7 күн бұрын
Thanks for the tip 🤣
@Willdlans7 күн бұрын
I get stopped and checked for drugs at the Airport it's bullshit probably has something to do with having long hair and beard and tattoos.
@BikeShedBoy7 күн бұрын
Mate, I get stopped every time. stopped for drugs. Did they find any 🤣
@steelisreal43137 күн бұрын
That's a fancy road bike.
@GreenFingerHandyman7 күн бұрын
Did they search you know where?
@BikeShedBoy7 күн бұрын
@steelisreal4313 Thanks, mate. It's the only bike I have that I look at and think nothing to upgrade 🤔
@BikeShedBoy7 күн бұрын
@@GreenFingerHandyman I haven't 🤣
@Hicks131311 күн бұрын
Nothing compared to my mtb
@BikeShedBoy10 күн бұрын
Mate, no road bike can compare to an mtb👍
@GreenFingerHandyman11 күн бұрын
Wow that looks sweet mate 😮 did not know you ride road bikes?
@BikeShedBoy11 күн бұрын
Yes, mate, last time was before covid 🤣
@steelisreal431311 күн бұрын
Burly
@BikeShedBoy11 күн бұрын
😎 👍
@patrickbonner484111 күн бұрын
That's a lot of work to gather the components before building the wheels always wanted to have a go at building me own wheels not so sure now after watching this .
@BikeShedBoy11 күн бұрын
It's honestly not too bad, mate. The online spoke calculators are so much harder to use once done a few times gets easy. I will do a video building the wheels next week 👍
@MNpicker12 күн бұрын
Good stuff man!! I am interested in this stuff.. I wanna see you build the set..
@BikeShedBoy11 күн бұрын
That awesome mate, I will look to do a wheel build video then when the spokes get delivered 👍
@Piroschkaburschi12 күн бұрын
Every hole´s a goal? Is that what I heard in the background?
@BikeShedBoy12 күн бұрын
Yes, that is what she said, mate 🤣
@williamlansdown670812 күн бұрын
More goes into building a wheel then I realised
@BikeShedBoy12 күн бұрын
The dt Swiss chart is super easy to use. I 👌 think it was like £80 about 12 years ago but has saved me a fortune learning how to do the entire process to fully built.
@williamlansdown670812 күн бұрын
@@BikeShedBoy it's looks to be well used.
@Willdlans12 күн бұрын
All that maths would do my head in.
@BikeShedBoy11 күн бұрын
@williamlansdown6708 is definitely well-used mate 👍
@BikeShedBoy11 күн бұрын
@Willdlans it's not that bad mate with the chart 😉 👍
@nobrakes724713 күн бұрын
Snap
@BikeShedBoy13 күн бұрын
Snap?
@lewisyoung604013 күн бұрын
I have an orange Ali elite not too far different to this, mine isn't polished, doesn't have a roller for the front mech. Has rc35 too, but slightly older gen with the steel tube brace, will be getting swapped out for 1st gen with a roller with the rocker version going on my ozone. These bikes ride so nice! Nice to see odi attack grips, same as mine
@BikeShedBoy13 күн бұрын
They are really nice bikes, and I agree with you, and they ride super well. 👌 I really love the rc35 forks, and I have a spare set in the workshop I will be doing a service on in the next week or two. The grips are great and nice to see that they are still available on eBay for less than £20. Definitely don't see many of these bikes, so it's definitely worth holding on to mate 👍
@lewisyoung604013 күн бұрын
@@BikeShedBoy I too have a slight problem.... There is also a Funk, a rc300, 3 trek, a Pacific, ozone, couple of Cannondales and another 5 or so 🤦🏻♂️
@BikeShedBoy13 күн бұрын
@lewisyoung6040 I don't even know where I am gunna to start putting bikes over the next few weeks 😅 I will find space. Mate, it sounds like you also have a great collection of bikes 👍
@dougbrett921813 күн бұрын
Good upgrade but don't you need a specific grease for when steel meets ti
@BikeShedBoy13 күн бұрын
Yea already gone back removed and used copper grease on the axles mate. Someone had pointed that out and then thought about it. Makes total sense. First time doing this upgrade, so I am glad I can share with you guys and also receive advice 👍
@dougbrett921813 күн бұрын
@@BikeShedBoy I use ti-prep anti seize
@digthemedium13 күн бұрын
Absolutely on board for Shedaroony. Goonies, however, are already an elite group taking on no other members.
@BikeShedBoy13 күн бұрын
I will leg her know 🤣 the bikeshed girl is threatening to come in to thease comments today and replay to all you shedaroonys 🤣
@pawlhart395014 күн бұрын
34:28 “let me out!” What have you done to @Bikshedgirl?😢
@BikeShedBoy13 күн бұрын
She is alive and well 🤣 I may have to go back and check that out 🤔
@MNpicker14 күн бұрын
Proper upgrade for proper hubs👍🏻👌
@BikeShedBoy14 күн бұрын
Cheers mate. 100% agree 👍
@charlesholland685114 күн бұрын
Sweet! So do you only like vintage bikes or new and old?
@BikeShedBoy14 күн бұрын
Love all bike mate 👍 I love to do restomods as well as you will see on upcoming bikes 😎
@hennings393814 күн бұрын
This M650 Deore DX is still one of my alltime favourites. Classic beauty ❤
@BikeShedBoy14 күн бұрын
100% I agree with you, mate, on that 👍
@thinkpadBentnoseTheBlind14 күн бұрын
I love those black XT hubs. I just scored a swell mint full set of same year SLR wide elbow XT canti's for my 1991 Rocky mountain Hammer. I must mention that i did not see the copper Tiprep anti seize used to stop the cones from fusing to the Titanium axles. it is a must and if i missed it some how i apologise .
@BikeShedBoy14 күн бұрын
Honestly, mate, now you have said that I will have to re-do them. I did not even consider that! Thanks for the info 👍 great score on the Canti's 😎
@thinkpadBentnoseTheBlind12 күн бұрын
@@BikeShedBoy thanks !
@Willdlans14 күн бұрын
They are going so nice when laced to a rim.
@BikeShedBoy14 күн бұрын
Got the rims mate video coming midweek next week 🙌
@williamlansdown670814 күн бұрын
Nice I will be turning in for that one for sure.
@williamlansdown670814 күн бұрын
To the bikeshedgirl I am a bikesheder.
@BikeShedBoy14 күн бұрын
@@williamlansdown6708 yes mate some great rims keep an eye out 👍
@BikeShedBoy14 күн бұрын
@@williamlansdown6708 I am not allowed to respond to this message as the bike shed girl said she got this 🤣
@samblenkharn809915 күн бұрын
Bikeshedgirl: "I think I'm a genius" 🤣. Nice old orange that.
@BikeShedBoy15 күн бұрын
Don't make her head any bigger 🤣 definitely a great orange. Cheers mate 👍
@robertmcfadyen915615 күн бұрын
Neighbour's Giant Talon e3+ pedalec , nothing but problems . I will go over it later today in detail . Love and best wishes .❤
@BikeShedBoy15 күн бұрын
Thank you, mate, ever so much and the same to you and your family as well. Make sure you give it a great check over 👍 👌 😉
@Speedscholars16 күн бұрын
Classic bike, great job!!! 👏🏻
@BikeShedBoy15 күн бұрын
Thank you so much, mate. There is so much more to come 👍
@justgarrygame17 күн бұрын
great video. what condition does your father have just wondering, thought he was a crack head at first 🤣but hes a great bloke know hes not. wish him good health and gain some weight if he can god bless 🙏🙏
@BikeShedBoy17 күн бұрын
I don't know what they are called mate, but I do think he is a werewolf in slow transformation 😂 definitely great guy and the best dad ever, and 100% not on crack or anything else👍 drop on to one of his videos and ask he will know the names. 😉 thanks for watching one of my videos, mate. Appreciate it!
@lebowskiunderachiever359117 күн бұрын
Very nice, congratulations 🎉 !!
@BikeShedBoy17 күн бұрын
That was one of my first builds in a shed that was not finished and was super cold 😆 thank you for watching some of the old videos. I feel like I have come a long way in the development of the shed filming and editing and all sorts since then 👍
@lebowskiunderachiever359117 күн бұрын
If getting tires on was that easy, the sound effect was propper 😊
@BikeShedBoy17 күн бұрын
Mate tyres and rim combinations are a joke, and then some are super easy 🤣
@Chubbycreeks18 күн бұрын
What year is this bike ?
@BikeShedBoy17 күн бұрын
I think it's either a 1991 or 1992 mate 👍
@lebowskiunderachiever359118 күн бұрын
I love watching stuff like this. I have an old Parkpre that needs some love 😊
@BikeShedBoy17 күн бұрын
Mate I just absolutely love the old bikes in general. Thanks for watching and enjoying the video. Really appreciate it 👍
@patrickbonner484118 күн бұрын
Yeah i always wanted the orange p7 back in the day .but as I age , its all hybird for me now upright for comfort , would love a butchers cargo bike think there a class yoke
@BikeShedBoy17 күн бұрын
Love the p7. I am currently doing one on the channel, and I did a trash or tresure on it, and now it's away for a repaint and then a rebuild. I know what you mean about needing a sit up and beg bike, I have retro fitted and had to change bikes for that reason for people in the past 👍
@robertmcfadyen915618 күн бұрын
This is a "BARN FIND" .
@BikeShedBoy18 күн бұрын
Probably, mate. Not to perfect as it should be👌
@patrickbonner484118 күн бұрын
Eh how did you get the shine ... almost like you sprayed a clear coat over it .
@BikeShedBoy18 күн бұрын
No clear coat. It had some t-cut and then some engineering wax and polish. The frame looks amazing. 👌
@patrickbonner484118 күн бұрын
Wow ....looks the part !
@BikeShedBoy18 күн бұрын
Retro all the way, mate 👍 👌
@hamadysack315718 күн бұрын
Bike Shed Bed Heads.
@BikeShedBoy18 күн бұрын
Don't want anyone falling asleep, 🤣
@adamdomaingue161718 күн бұрын
Great name. When's the wife going to build a bike??
@BikeShedBoy18 күн бұрын
Mate, I would only let her have a go on a scrapper at the moment, but it may happen 🤣
@NJ87-9018 күн бұрын
Just got back from seeing you@shop (nice catch up) I'm now watching this with a lovely cup of 🍵..👍