Good guide to rewiring a Kenimoto lighted rear-view mirror for my Ranger XP 1000. LED on rocker switch now goes out when ignition is off.
@backcountrymafialife68346 күн бұрын
Folks, first I want to say how happy I am with the turn signal I bought from you for my polaris general. They work flawlessly and they even kept me from getting a ticket for riding on the road.... but I do have a question... can you make a plug the will t into your set up for the turn signal and brake lights that would allow me to connect to my chase bar? My bar has the ability to work with my bake and turn signal light but I don't want to cut into the factory or your harness.
@jeancharleb17 күн бұрын
Can’t find the link
@GrimReaper28010 күн бұрын
Good job!
@automotivecustomlighting255510 күн бұрын
@@GrimReaper280 Thank ya
@leethao982723 күн бұрын
Thank you
@tonyluna755629 күн бұрын
I’m going to get one we’re can I order them light please
@MarkBrown-lv5leАй бұрын
By far the best video on youtube. Very impressive!
@MarkBrown-lv5leАй бұрын
Can I use just the blue & black wires on a Polaris pulse bar plug?They come with a black, red & blue wire .Blue being the ignition. I have a LED dome light & it only has a red & black wire. It has a on/off push button switch on it so I don't want to have to use a rocker switch. If so? Would I put a in-line fuse on the ignition wire as well???
@markreed171Ай бұрын
🤣🤣🤣🤣🤣🤣🤣
@johnwilson4564Ай бұрын
So correct me if I’m wrong if I get one for my Atv and the harness has a pulse bar on it so it’s all ready done so all I have to do is cut the pulse bar and you have the three wires correct ground live and switched right
@jeremihachey4449Ай бұрын
Would I need to do 2 pulse bar plug if my light bar harness (baja style) has 2 relays for a 2 button controller. Thanks
@davidhunter8153Ай бұрын
Where can I buy them
@stroke0187Ай бұрын
Do you have a kit for the xpedition with ride xommand ?
@automotivecustomlighting2555Ай бұрын
Yes we do. Woeking on video as we speak
@jonroberts10711 күн бұрын
Does this work on a 1000 premium. Has a different gage cluster than the video.
@automotivecustomlighting255511 күн бұрын
@jonroberts107 yes match cluster to my website pictures
@whynotdoitanyways54662 ай бұрын
Do you guys happen to have a lightly used 10” sub and amp that fits under the passenger seat and has the wiring harness that is plug and play with ride command. Money is tight just shortly after buying this but cant use the radio without the sub and amp because it sounds terrible. Lol.
@michaelbaird6102 ай бұрын
Does this have a fuse in it?
@automotivecustomlighting25552 ай бұрын
Uses Factory Busbar fuse.
@MikeSamuelsII-ve8gp2 ай бұрын
total fail.
@jamesm149016 күн бұрын
how
@nickleblanc75463 ай бұрын
Where can I get me this same relay?
@automotivecustomlighting25553 ай бұрын
Visit the website or message us
@nickleblanc75462 ай бұрын
Sorry I figured that out right after I sent the comment. Better question, how did you connect the toggle switch to the same light?
@martinsitar68863 ай бұрын
What size is that pop tab that stays on the body? I’d like to get a replacement just in case it breaks during removal.
@Patriot-pq1ku3 ай бұрын
You guys rock it was so easy to install
@scottruth38453 ай бұрын
I did this, works great! But white is positive, yellow ground.
@travispeach61414 ай бұрын
Isn't that plug only meant for a .05 Amp back up beeper?
@automotivecustomlighting25554 ай бұрын
Correct. That is why it's only used to trigger the relay.
@acreageliving3 ай бұрын
@@automotivecustomlighting2555 where is the relay/light getting power from then? i dont see any other source in the video other than the beeper wires. Just trying to understand.
@mikes02ls14 ай бұрын
David still killing it with you and teams skills.
@jadebylund70614 ай бұрын
So my light bar came with a 2 wire harness identical to the one here. My question is if i follow these instruction and convert it to a 3 wire harness. Can i still turn the light bar on with the key in the of position? Or do i have to cycle the key on?
@automotivecustomlighting25554 ай бұрын
Key has to be on.
@chrisdevos23254 ай бұрын
What if my harness has 3 leads with 2 relays?? Which relay do i come off with the white wire??
@jerrileelegrow65535 ай бұрын
"Promosm" 🙈
@ericpierzina46295 ай бұрын
Video without music please
@dannyhodges13115 ай бұрын
What did you use as a pull cord
@timg33266 ай бұрын
Beautiful bike 🏍 😮
@davidgillen7776 ай бұрын
Do you guys sell any light kits for the polaris?
@automotivecustomlighting25556 ай бұрын
Yes
@wallaceryan776 ай бұрын
Finally found a video that helped explain how to wire into a pulse bar. I did same thing except I ran ignition switch to toggle light. This is much cleaner and definitely how I will do my new RZR I'm wiring up now. Thank you
@automotivecustomlighting25556 ай бұрын
Very Welcome
@genefrank39646 ай бұрын
I’ve got a 2024 Polaris razor XP. I purchased a Chase bar and it has all these different colored wires for the reverse is white turn is blue. The other turn is brown. The red is stop. Where do I wire this up to? 14:19
@kameleon23236 ай бұрын
watched the video while installing your kit! Super easy and super high quality. Thank you!
@automotivecustomlighting25556 ай бұрын
Very Welcome ❤️
@brandonfarmer12618 ай бұрын
Is it possible to hook up a backup camera to this I have a car head unit in my Polaris general and for the life of me cannot get the back up camera to turn off and on when going in and out of reverse
@automotivecustomlighting25557 ай бұрын
Sure can. Just need me SSC2 lower wiring. Message if you only want wiring
@user-ek7dv5wm4l8 ай бұрын
How do I wire this switch to be key on power only so the led in the switch only lights up when my key is on. This rocker switch has a red and black and a separate red black and white coming out of the switch 2023 rzr turbo r trying to connect to the pulse bar witch is red black and yellow if you can help thanks
@firechief408 ай бұрын
What is your web page or how can we buy things?
@chrishill12868 ай бұрын
The dash disassembly is priceless, I wish your video was searchable with that criteria! Great work all around!
@user-qd3ck3dp4x9 ай бұрын
Great kit. Minus my rear signals blinking opposite the front. Left signal on, left front blinks and right rear blinks. Same goes for right.
@automotivecustomlighting25559 ай бұрын
If you purchased my turn signal kit, that means polaris installed your rear tail light harness backwards. If you remove the tail light you will see the incorrect label. All you have to do is flip the harness around.
@user-qd3ck3dp4x9 ай бұрын
@@automotivecustomlighting2555 I did purchase your kit and that was my guess/hope. Way to go Polaris and good looking out automotive custom lighting!! Cheers!
@automotivecustomlighting25559 ай бұрын
@@user-qd3ck3dp4x No problem. We have seen this issue happen about 30 other times. Easy fix tho
@user-qd3ck3dp4x9 ай бұрын
I installed a kit and my taillights are blinking backwards. What gives?
@linosierra48999 ай бұрын
Is the European kit coming out for the 570?
@automotivecustomlighting25559 ай бұрын
At this time we do not plan on releasing a euro kit for 570.
@Shakedownstick4 ай бұрын
Why not is it that different?
@chrisgrantham23419 ай бұрын
did you do a video on converting the harness switch to a carling style switch I don't see it
@automotivecustomlighting25559 ай бұрын
Not yet. There is so many switches to change to Carling. I would have to make a bunch.
@chrisgrantham23419 ай бұрын
it also said there was a diagram on your site, i didn't see that either. @@automotivecustomlighting2555
@user-le7wg6ts2c9 ай бұрын
Can you ship them???
@automotivecustomlighting25556 ай бұрын
Yes
@mrsandman60810 ай бұрын
Can these be ordered?
@automotivecustomlighting25556 ай бұрын
Yes message us directly on Facebook or email
@davidjulseth86672 ай бұрын
Cool
@hikerdude526510 ай бұрын
Dude... you are a teacher! That was one of the best lessons I ever had in wiring my general and, it was the best engineering vid I've seen on KZfaq for any of my Do-it-yourself projects. Your photography was perfect and the vid content was so to the point; I can't see a lot of wasted vid time. I plow a lot of seasonal road in the north and good reverse lighting in a must. I'm ordering through your link. You should be teaching ppl how to do vids. Thank you so much for sharing your talent!
@maguramr.magura239310 ай бұрын
Excellent video. Thanks!
@itchyjoe11 ай бұрын
Just installed their "auto + switch" harness on our XP 1000; it was pretty easy thanks to this video and the light works great without "glow" when the engine is off. No relay t-mounting bracket is included, as in the video, so I fashioned one out of a small piece of perforated metal hanger strap. That took more time than the rest of the project.
@automotivecustomlighting255511 ай бұрын
Contact us, we can ship you one. We have a new person assisting with making these. A few orders slipped out the door without the metal piece before we caught it.
@richardrisner363511 ай бұрын
Good video but the dog collar is a bit much lol
@russellallen2111 ай бұрын
Where can I get the black mounting bracket? Mine only came with the silver mounts. Thank you
@automotivecustomlighting255511 ай бұрын
Hello, Black brackets is mainly for machines with rear exhaust while the silver brackets is mainly for if you have the side exhaust. You can purchase them separate automotivecustomlighting.com/store/rear-mount-brackets-for-diode-dynamics-light-bars/
@russellallen2111 ай бұрын
Where did you get the relay harness?
@automotivecustomlighting255511 ай бұрын
We make them in house. automotivecustomlighting.com/product-category/offroad/polaris/polaris-ranger/reverse-light-accessories/
@russellallen2111 ай бұрын
@@automotivecustomlighting2555 thank you
@blibb894011 ай бұрын
Can you do a video on those whip lights?
@automotivecustomlighting255511 ай бұрын
If we get another machine in soon, yes
@davide3129 Жыл бұрын
Is the separate and dedicated ground necessary, most relays don’t include this
@automotivecustomlighting255511 ай бұрын
Not sure what ya exact info you are needing. The relay setups we make is Plug and Play.