PNW EXPLORER

Пікірлер

@Qkfltpdls777 4 күн бұрын

What to do if 20,000km driven spark plugs are wet with gasoline or coolant even after replacing valve cover gasket for nissan vq35hr engine?

@KaiMolinaOfficial 12 күн бұрын

Ngl I thought the tire was going to come off

@blakejones2163 12 күн бұрын

That tire 💀

@gooddoge9347 13 күн бұрын

Lol, imagine owning a car that you have to take the steering wheel with you

@Tugboat16 14 күн бұрын

That wing 😂

@AndrewButorin 23 күн бұрын

Lol that little face

@jorges.3337 28 күн бұрын

Have the correct address to drop that off? Or do you need my address again....❤

@pnwexplorer4126 15 күн бұрын

I think I did dropped it off at wrong address 😄

@Va.2Az Ай бұрын

It won’t hold zero.

@Mufasa31ful Ай бұрын

What happen 😳

@jerrodwaterman9793 Ай бұрын

Might be a bit wet yet

@Eatingsakurasass Ай бұрын

Gonna try this myself wish me luck

@pnwexplorer4126 Ай бұрын

Good luck, let me know how it goes!

@joshuawalker5044 2 ай бұрын

I hate to tell you this, but thats not coolant

@pnwexplorer4126 2 ай бұрын

Right, that is distilled water to clean the cooling system before adding new coolant! The idea was to show where is the drain plug located!

@VillagransPitStop 2 ай бұрын

That looks like water 🤣

@pnwexplorer4126 2 ай бұрын

It is distilled water, I flushed it a few times to clean the system before adding coolant, but the idea is to show where it is the drain plug!

@VillagransPitStop 2 ай бұрын

@@pnwexplorer4126 okay gotcha makes sense now, proper flush. My Kia only 5Q and I had to flush it make 6 time for it to come out crystal clear again

@pnwexplorer4126 2 ай бұрын

@@VillagransPitStop on a Nissan 350z if you drain the block as well it takes 2.5 gallons to fill it back) but in this 3.5 liter Nissan engines it's a pain in the ass to get the air pockets out of coolant system without a vacuum pump!

@VillagransPitStop 2 ай бұрын

@@pnwexplorer4126 air pockets are a menace, hope it went well 😎

@bmxdrift2009 2 ай бұрын

yes 350z

@pro100feel 2 ай бұрын

Славянский акцент не прослеживается. Ни разу

@pnwexplorer4126 2 ай бұрын

Where are you from?)

@dustin8ort903 2 ай бұрын

Never seen a manifold like that before

@KhrisKlean 2 ай бұрын

Super duty truck

@CodingVagLab 2 ай бұрын

Что за акцент знакомый 😀

@pnwexplorer4126 2 ай бұрын

Moldova!

@user-is5es1dc9f 2 ай бұрын

Славянский?

@CodingVagLab 2 ай бұрын

@@user-is5es1dc9f да да🙂

@DoubleoP 2 ай бұрын

I dont like this design....

@pickle5051 2 ай бұрын

Replace oil galley seals too.

@pnwexplorer4126 2 ай бұрын

Yesss

@juliotorres512 2 ай бұрын

I always paint a Mark at the 12oclock AND Go to the 3oclock like that if I get called off the job then I know where I Left off.

@pnwexplorer4126 2 ай бұрын

Yes , I do that always too, so if you forget a bolt you see it by the marker Mark! Always good to do it, no matter what tool you use!

@DeannaLobes 2 ай бұрын

Is copper spray okay to use on MLS gaskets? I’ve had so many different answers.

@aubreylionswings8889 2 ай бұрын

Wtf

@ronwade2206 2 ай бұрын

Cooper? 😅

@JuniorBetch 2 ай бұрын

Sometimes vintage tool shorts I appreciate, this is this making me appreciate technology 😂

@ABs70nova 2 ай бұрын

Need yourself a snap on tech angle wrench

@xrciszt 2 ай бұрын

Dam how long did that take? (What car u got?)

@pnwexplorer4126 2 ай бұрын

Nissan 350z /2004

@alexlashley9839 2 ай бұрын

Now we’re gonna do 90 de…💥😯😦😧😮😲🫨🤯😭😭😭😭

@charliemclaughlin1042 2 ай бұрын

Good luck 🤣

@pnwexplorer4126 2 ай бұрын

Thank you!

@MrVolksbeetle 2 ай бұрын

I’ve used copper coat for decades now and have never had a head gasket come back. Is it because of the copper coat or because I do the job correctly? Either way, copper coat doesn’t cost much so I’ll continue to use it.

@pnwexplorer4126 2 ай бұрын

As someone said, I don't know if will help but for sure wouldn't do anything wrong 💪🏻

@backpocketmechanic7751 2 ай бұрын

I build high power 15L semi engines, between 600-900hp, and we copper coat the hell out of our head gaskets, even with fresh machine work, its the only way to keep a cat 3406E or cummins 855 from leaking after a year of running, the customer and us dont ever want to see oil on the side of a $70k engine

@pnwexplorer4126 2 ай бұрын

Hope I will not have any leaks in near future on this Nissan 350z , thanks for information, I am using it for first time , decided to do an experiment!

@KingEdwardA 2 ай бұрын

Would you suggest it on natural aspirated aluminum block and heads? Thanks

@dodgelife1368 2 ай бұрын

Watched it 30 time and still don’t see the spring

@pnwexplorer4126 2 ай бұрын

kzfaq.info/get/bejne/o8qYl8hptquqmn0.html here is a better video of whole process

@Mr_Mgun 3 ай бұрын

you need to clean that thing.

@user-gg4wc9jf7d 3 ай бұрын

😮😊❤

@mhosviorica5642 3 ай бұрын

❤bravooo

@powertech310 4 ай бұрын

Bahut acha hai #tigandarcwelding1

@johnrichardson82 4 ай бұрын

I do this before I heat with a torch

@killahoe9748 4 ай бұрын

you should stop buying car parts and stock your fridge broke boy

@pnwexplorer4126 4 ай бұрын

😂😂😂

@beaujacklewellen6524 4 ай бұрын

Selma like his priorities are straight lol need the car to get to the store even better if you get there fast 🤣🤣

@pnwexplorer4126 4 ай бұрын

@@beaujacklewellen6524 💨🔥😂

@fatjaysgarage 4 ай бұрын

I can't see how to loosen tensioner

@pnwexplorer4126 4 ай бұрын

Just remove those two bolts and take it out!

@klausachtemeier9783 4 ай бұрын

this guys an IDIOT

@user-po5lg3fd1h 4 ай бұрын

Key🤣 Adjustable spanner

@dustinandtarynwolfe5540 4 ай бұрын

Man someone took care of that motor

@xmzalkadary9153 4 ай бұрын

возвращайся на родину👺

@BarryMckockinner 4 ай бұрын

Do you think Nissans are a good car

@katuchilife5943 4 ай бұрын

I used to not think so but I've seen so many that refuse to die I'm beginning to think otherwise. Just think about all the torn up altimas you see driving around.

@pnwexplorer4126 4 ай бұрын

Yes!

@BarryMckockinner 4 ай бұрын

I’m at 150k with my 16’ maxima. Hasn’t given me any issues ever apart from having the alternator and compressor go bad, one time each. Other than that it’s just been the general maintenance. I’m gonna keep it going for as long as I can. Surprisingly good on mileage for a v6. On long trips I’ll get 500 mile range on a full tank.

@pnwexplorer4126 4 ай бұрын

@@BarryMckockinner how many gallons is a full tank?

@BarryMckockinner 4 ай бұрын

@@pnwexplorer4126 16 gallons I think it might be an 18 gallon tank though, but I’ve never let it get that low 😂 I take care of her she takes care of me. Cheers!

@katuchilife5943 4 ай бұрын

Im pretty sure thats not how your supposed to do that.

@LeinadiusTheHero 4 ай бұрын

It's recommended by manufacturers to fill coolant this way. Pulling a vacuum is an easy and fast way to ensure there are no air pockets.

@katuchilife5943 4 ай бұрын

@@LeinadiusTheHero idk man I've always pulled the top radiator hose and filled it till it over flows. Then I flip the line to fill the block, re attach the hose and then fill from radiator cap and pull vacuum to get any air. Then heat cycle the engine, let cool and refill pull vac one more time and then seal it up

@pnwexplorer4126 4 ай бұрын

@@LeinadiusTheHero right!

@pnwexplorer4126 4 ай бұрын

@@katuchilife5943 that works too, but with vacuum is much faster and you need to fill it once and it's good, without any air pockets!