nice looking Slipway, should aid in the build process, are you intending to display the ship on the slip way, or just use it for the build, if just using for the build I wouldn't paint or stain, if your going to use it to display stain.
@genojoe317611 күн бұрын
kip, I am going to use it for the build only. I ended up painting it satin white.
@AcquiredByGod23 күн бұрын
Very intriguing start, Joe! I eagerly await the future updates on this build! I look forward to it.
@genojoe317623 күн бұрын
Thank you!
@vanmacvideos377425 күн бұрын
Joe, well it looks like you’re on your way for the Santa Maria build. One thing I found helpful was after the skeleton was finished, was not using the side locks. Having the freedom of rotation (About 270 degrees) work well for me. Especially during the planking phase.
@genojoe317625 күн бұрын
Van, I was scratching my head on that and wondering, why use the sides locks? And you just answered my question. Will do, thank you! I agree the rotation is necessary. I saw you painted the slipway and I think I am going to as well.
@vanmacvideos377425 күн бұрын
@@genojoe3176 Painting the slipway gives it a cleaner look. Plus, photographing the ship along the way has a nice contrast and doesn’t blend in.
@genojoe317625 күн бұрын
@@vanmacvideos3774 Thank you!
@GregWilson63526 күн бұрын
looks to be a fun little build. Will look forward to updates.
@GregWilson63526 күн бұрын
I really need to get one of those Pin pushers. I bought an Artesania one and it broke first time I used it. Nice, informative video Joe. Hope your wife enjoys the build.
@genojoe317626 күн бұрын
Greg, thank you! I fully indorse the OcCre version. I had the AL version with the black plastic handle and it literally broke a few nails into the build. Terrible tool! I think she will enjoy the build!
@vanmacvideos377426 күн бұрын
Hi Joe , I have the Model Expo push nailer (brown handle) works well. Ordering directly from OcCre is really nice and easy. Even requesting spare parts. Love the idea of having your wife getting involved, I think she’ll like it. Finishing up the dyeing of the hull on the Santa Maria. Part 4 should be out in the beginning of August.
@genojoe317626 күн бұрын
Thank you! My wife is the kind of person who loves crafting of any type, while she is a bit apprehensive to do a ship, I am always here to assist her. I think she will be just fine and enjoy it. Looking forward to the Santa Maria!
@OlhaBatchvarovАй бұрын
Congratulations on finishing 👏
@genojoe3176Ай бұрын
Thank you! That means a lot to me coming from you.
@wolfgangzinnАй бұрын
Nice build. Looks great
@genojoe3176Ай бұрын
Thank you!
@g-kipАй бұрын
Nice Build Joe she looks great
@genojoe3176Ай бұрын
Thank you! I am proud of it.
@AcquiredByGodАй бұрын
Amazing Build, Joe! This ship is actually on my list of kits I want to build myself. Great skills 👌
@genojoe3176Ай бұрын
Thank you! That is my second wooden ship model. I will be starting my next one very shorting. I will follow your build!
@FranciscoGarcia-ce3ubАй бұрын
Buen trabajo 👍
@genojoe3176Ай бұрын
Thank you!
@wamix582 ай бұрын
Również zastanawiam się, czy kupić zestaw Santa Maria. Na YT spotkałem filmy, na których było widać za krótkie listwy poszycia, brak drobnych elementów etc. Mam nadzieję, że firma to poprawi.
@genojoe31762 ай бұрын
I will be starting this ship soon, but not certain exactly when. Please feel free to subscribe and you will be notified as to the build progress. I hope to soon!
@wamix582 ай бұрын
I'm just starting "final lap" with my schooner "Polotsk" by Master Korabel, russian company from Sankt Petersburg, in my humble opinion one of the best in the world, although their kit ropes are a big mistake, so is necessary to buy or do correct ones. Few words about me: I'm living in Gdansk, city in north Poland, and all my life I've worked in ship repair yard Remontowa. Now I'm pensioner.
@fatmike50382 ай бұрын
I use wood glue and just let it have it's time to cure. Remember it's a hobby, no need to be in a rush.
@fatmike50382 ай бұрын
Wow nice line up. I'm glad you are having fun. I would love to do one of those Beagles
@NosterRex2 ай бұрын
Fabric sails do look so much better!! Looking good buddy!
@genojoe31762 ай бұрын
I agree. I soaked them in tea as suggested by OcCre and the do indeed look life-like.
@homeharbour62382 ай бұрын
Great work. Congratulations 😉
@genojoe31762 ай бұрын
Thank you! I am proud of it.
@homeharbour62382 ай бұрын
@@genojoe3176 you really should. Great model
@GregWilson6352 ай бұрын
Congratulations Joe! What a fantastic result. Will look forward to the final video
@genojoe31762 ай бұрын
Thank you, sir! I am very pleased with it. I will be working on the final video and voice-over this weekend. Hopefully I do it justice.
@vanmacvideos37742 ай бұрын
Looking good Joe ! So, are you going start the Santa Maria next ? Started working on Part 2 video of the Santa Maria today.
@genojoe31762 ай бұрын
Yes sir, I am going to start it next. I really enjoyed this one and thank you! I will be looking forward to your next video.
@NosterRex2 ай бұрын
Looks incredible, great job!!
@genojoe31762 ай бұрын
Thank you! It's getting there, almost done!
@genojoe31762 ай бұрын
Wolfgang summed it up well. @wolfgangzinn 21 minutes ago Thank you very much. Yes, the choice of glue is (almost) a science. My simplest rule is: if it doesn't have to hold immediately and can dry, then white glue, especially with light-coloured yarn. For brown or black yarns, superglue often works, or if a dark discolouration of the natural yarn is not noticeable.
@homeharbour62382 ай бұрын
Great work. Congratulations
@genojoe31762 ай бұрын
Thank you, Roma!
@GregWilson6352 ай бұрын
You have been busy! Sails look awesome mate :)
@genojoe31762 ай бұрын
Thank you, sir! I am almost there!!! I have enjoyed this kit for sure.
@genojoe31762 ай бұрын
I'm now up to a total of nine broken threads. Ugh....Almost done!
@g-kip2 ай бұрын
CA glue can be very brittle, I do use CA for rigging and have not come across this issue, it could also be the cotton used, 9 times out of 10 I replace the kit cotton.
@genojoe31762 ай бұрын
I will try Starbond with my next ship which I received from Amazon. Yesterday a total of 3 more deadeyes snapped from the masts and yards as I was working with them. The thread used was the OcCer brand that was received with the kit. So as it stands it was OcCer thread and both Loctite and Gorilla standard CA, not gel. I certainly do not want that to happen on my next build which is the Santa Maria from Pavel. Is there a recommendation about replacing the cotton besides Rope of Scale?
@g-kip2 ай бұрын
@@genojoe3176 pavels ropes are good,dont need replacing
@g-kip2 ай бұрын
Model looks great Joe, like a previous comment my wife would roll her eyes feign interest and walk off, your a lucky man 😊
@genojoe31762 ай бұрын
That I am! Thank you!
@GregWilson6353 ай бұрын
I use Starbond medium CA glue on mine without any breakages so maybe its a brand thing? Not sure
@genojoe31763 ай бұрын
I have used both standard Gorilla and Loctite CA, but I have never tried the gel version of either. I will most certainly give it a try and use the gel variant. Thank you, folks!
@genojoe31763 ай бұрын
Ordered! It will be here later this afternoon. Gotta love Amazon!
@4iekurs263 ай бұрын
Hi, superglue makes the string hard and therefore can break.
@genojoe31763 ай бұрын
I was working on the ship for several hours tonight and I am rigging the sails and I have had three more break off. I will try the gel style of CA in my next build and see what happens. The folks telling me to use the CA gel are very good builder and are tops! Have you tried the CA gel instead?
@NosterRex3 ай бұрын
I’ve always used stick fast brand thick super glue, on everything I build. I’ve never had an issue with it in any way. And I’ve used it on a lot of projects that have thread. Hope that helps.
@genojoe31763 ай бұрын
Oh yeah! Thank you!
@homeharbour62383 ай бұрын
I think it's better to use super glue gel. It's more flexible and I think it will not snap like that
@genojoe31763 ай бұрын
Ah, perhaps that is my problem, not using the gel version where it comes to rigging. I will use the gel and see how it goes. Roman, thank you for answering. I have received almost 350 views and you are the only one to answer. As a matter of fact, people have been giving me a very high amount of negative reviews on this and all I did was ask a question to problem. It is sad how people think these days.
@homeharbour62383 ай бұрын
@@genojoe3176 never let no one to get in your head with negative comments. You are doing a great job. Be proud
@genojoe31763 ай бұрын
@@homeharbour6238 Thank you!
@homeharbour62382 ай бұрын
@@genojoe3176 always welcome my friend 😉
@vanmacvideos37742 ай бұрын
I agree with super glue gel. I haven't had any problems .
@homeharbour62383 ай бұрын
Great. You are really lucky Looking forward to see it all done
@homeharbour62383 ай бұрын
You are a lucky man. Great to have someone who got your back
@homeharbour62383 ай бұрын
Great looking model
@homeharbour62383 ай бұрын
Lifeboats are my pain 🤣
@genojoe31762 ай бұрын
Oh yeah! This was my first ship where I had to construct the life boats as the others were metal.
@homeharbour62383 ай бұрын
Looks awesome
@homeharbour62383 ай бұрын
Very useful in our business
@homeharbour62383 ай бұрын
Very clean work
@homeharbour62383 ай бұрын
Looks like pretty cool project
@genojoe31763 ай бұрын
Thank you, sir! This kit is my second ship build and I am surely loving it!
@homeharbour62383 ай бұрын
@@genojoe3176 don't call me sir😜😅 great work my friend
@homeharbour62383 ай бұрын
Great work Congratulations my friend
@genojoe31762 ай бұрын
Thank you very much!
@NosterRex3 ай бұрын
It’s awesome that she is helping you like that. My wife’s idea of helping me is shaking her head or rolling her eyes! Lol
@genojoe31763 ай бұрын
She does that too, but mostly she will jump right in!
@GregWilson6353 ай бұрын
Great work Joe. Looks like your wife is a natural with the hitch knots. I may offer her a contract when I'm next at that stage ;)
@genojoe31763 ай бұрын
She really enjoyed it! I think there is something wrong with her...
@genojoe31763 ай бұрын
Thank you!
@g-kip3 ай бұрын
Nice work Joe, the model looks great so far.
@genojoe31763 ай бұрын
Thank you, sir!
@GregWilson6353 ай бұрын
Great work Joe!
@genojoe31763 ай бұрын
Slow and steady wins the race. Thank you!
@GregWilson6353 ай бұрын
@@genojoe3176 I think that was the hardest thing for me to learn. Patience ;)
@genojoe31763 ай бұрын
@@GregWilson635 I still cannot wrap my head around the ratlines clove hitch. No matter how long I study them I just cannot seems to grasp it. Feeling my age!
@GregWilson6353 ай бұрын
@genojoe3176 for me, rigging is the hardest part. I'm reasonably good at clove hitch knot now as have done over 3000 of them 😉
@genojoe31763 ай бұрын
@@GregWilson635 OUCH!!!!
@chrismacks38813 ай бұрын
Nice to meet you today! Chris and Tanya
@genojoe31763 ай бұрын
Likewise!
@GregWilson6353 ай бұрын
Thanks for sharing Joe. Would be great to meet Olha
@genojoe31763 ай бұрын
She is an amazing person and very willing to share her knowledge!
@GregWilson6353 ай бұрын
Those instructions are a real blast from the past. Should make for an interesting build.
@genojoe31763 ай бұрын
You got that right, perhaps even complicated.
@GregWilson6354 ай бұрын
Nice work mate. my fat fingers would make a mess of that :P
@genojoe31763 ай бұрын
Thank you!
@GregWilson6354 ай бұрын
Great work Joe . The boats look awesome!
@genojoe31764 ай бұрын
Thank you, sir! I am certainly enjoying it!
@TheBurningSail4 ай бұрын
Looking good. 🫡👌
@TheBurningSail4 ай бұрын
Hope you survived the New York trip. 🫡😃 have fun with the lifeboats, they’re neat little extra models to build. 👌
@genojoe31764 ай бұрын
You got that right! The lifeboats are just about complete and were tricky little buggers. I will have a short in a bit showing the progress.