I used to test buckles, mounting plates, the webbing and the inertia seat belt set up back in the late '70s at TRW in Australia. They made seat belts for General Motors Holden.

Is this Astm d 429 method E

Thanks for the indepth information..🎉

Hiya Instrom, What was the diameter of the fibre? Best wishes, Dom

How to download it for 3366 testing machine?

Hello Dear, If I have a flexible Pet layer with a varnish that can detach from the per, what test is better? Peel 90° or 180°?

how I can download

Best jack stands are milk crates. I work on my heavy car and they never let me down. Free is best

which peel test was best , 180 or 90 degree

Did you use papers to hold the fiber?

I'm curious to know how much compression it can withstand at the center of the grate when placed upside down. We have a few people at the warehouse who are insistent on using these things as stepstools, and we have had an incident in the past where someone put their foot through and had to be cut out. Anyone have any idea?

How to update BluehillMT software. I need version 3.23.4156

Just like the construction of a house, the strength is in the load bearing walls. It is not in the center. In this case, the sides of the crate represent the load bearing wall. The center, like the house, is much weaker. The test should also find the exact weight that the walls begin to buckle. Continuing to crush the crate well after it's sides has buckled does not tell us how much the crate will hold, and still remain stout.

Nice and informative. May i know that for removing the compliance you initially inserted a specimen and later you rerun the test again. During this rerun test you used the same specimen ???

Elongation is calculated as 80 % at the end of the test. I think it is not possible for this type of rebar. Also, specimen breaks very near to the jaw, means that test is not comply with the standard.

hi sir can i do DIC with normal camera

Now we've used humans to test this out!

So how many Newtons it took to break it?

tq so much for this vid

How different is the excecution of this test compared with ASTM D3330 Method F?

I need one setting in my office Machine. In hand controller we assign number 1 button (balance load), number 2 (mark data). Number 3,4 buttons not use. I need to assign speed setting in that free buttons. Ex Number 3- 50mm/min Number 4-200mm/min Plz tell how to assingn& reply, thanks in advance

Thats just impact, where is the compression?

nice

Hi, there If the saved file is different than the file on the paper that was print out, does that mean the first time I put in the file name was different than the second time I put in the file name? Because when I started the test, it asked for the number of a batch once I put in it and clicked “next” it asked for the same number again but in my case, I couldn’t find the file that was on the paper that was printed out. The file that was done at the same time (shown on the paper) has a different number when I tried to Retrieved it in the saved folder, so my question is, the first time I put in the file name and the second time I put in the file name the two names didn’t match is that correct?

🔴 Can you understand doctors definitions? 🤔😁 ⭕ Can you describe your physical condition ?😅 🎈while feeling (as strong as a horse)🦄💪 🎈 Or a bit (under the weathe) 😥😅 🎁 Well, what ever your answer was 🎁 I guarantee that this video is going to inrich your medical vocabulary🤩🤩💎💎 🙈🙈 kzfaq.info/get/bejne/Zr2qZc14st_VhGg.html

kzfaq.info/get/bejne/Zr2qZc14st_VhGg.html How many times do you use ⭕ VERY ⭕ in your speech???🤔 Are you done?🙂🤣 Do you want to replace it with stronger words?💪💪🔥🙈 🎇🎊 Instead of 1 i have for you the strongest 25 alternatives 🤩🤩🤩🤩 🎈🎈🎈 SUBSCRIBE 🎈🎈🎈 on KZfaq to learn effective English weekly 🌺💝 kzfaq.info/get/bejne/q9Nxi6VezMfcf5s.html

What is the load range for the flexural test to break the composite sample

Thank you for the informative video! Would you be able to direct me towards more detailed information on specimen alignment, preferably with a variety of approaches to this all important task?

Best in the world company always try to spread the best of their knowledge. This is so informative to understand the machine problems and how to solve it

My goal . A squat rack made of milk crates and 2 jack-stands . If he dies he dies ....

Great session and thanks much!☺️

Great stuff! Question: could the alignment issue be resolved with using spherical bearing at both ends of a tensile test, thus treating the force train as a two force member?

what kind of plastic is?

can you suggest me the speed rate and support span when specimen size 4 inch by 1 inch and specimen thickness 0.1010..specimen type fiberglass.

i needed this machin for my compuny.Sent me detiles

Is this fixture and extensometer used to test poisson's ratio？

Hi , Which medium you had used for the penetration?

Hi sir i used instron 5966 model in some test but system show in crosshead is moved so you can explain what happened

milton reis GURUPI TOCANTINS FABRICA DE POSTE DE CONCRETO PRECISO COMPRAR PRENÇA PARA ENSAIO DE CORPO DE PROVA CONCRETO

ASTM D903 isn't a 90deg test.

how get this software ??

how to setup auto update data from Bluehill® 3 when finish test. Thank so much.

Thanks for sharing! I was wondering if you could upload a playlist of videos for each calculation option in the Instron. There is a manual guide on your website, but being able to see you guys do may also be really helpful.

thanks for sharing!

awesome video! at what stress level did the catheter break at?

What is the thickness of this specimen?

fit rubber on both ends of egg then apply the preesure it sustain more pressure

اشترك ب قناتي و اردهااا حالن علق ب تم و اردهااا جرب لو ما اشتركت ب قناتك شيل الاشتراك

And it could be way more resistant if the point of contact/pressure was evenly distributed on both sides. In the experiment the pressure point is very small on top and bottom

As per which standard is this