most of my work in autocad are easy when i use lips file ...... you need to know short key... vlips and applod... also use ruby code for sketchup if u use plugin wich already avali. its so easy for use
@jeffersonmarchan92364 ай бұрын
How to troubleshoot the alignment grip to always be located at the center when you stretch your door?
@kisminden4 ай бұрын
Try this: add a point parameter, and to the point parameter add a move action so that it follows the center of the line. To do this, assign the aligment grip.
@saiharn30604 ай бұрын
What if my unit is ft-in, it doesn't work
@kisminden4 ай бұрын
the important thing is to set the same units in autocad and google earth. of course it works with feet/miles as well as meters/kilometers.
The basis is very simple indeed. You set the complexity by the number of parameters you put in.
@advancedautocaddynamicbloc73594 ай бұрын
@@kisminden have you done anything for steel structures like knee brace gusset plates
@kisminden4 ай бұрын
@@advancedautocaddynamicbloc7359 I have a lot of experience in steel construction, but in my work I always have to design a custom plate, so I don't have a block. If you give me the parameters, I can make a dynamic block.
@ItzSimonMC4 ай бұрын
I am friends with youre daughter 😅😅😅😅 I really like how passionate you ate about youre job and I think you really love what youre doing
@kisminden4 ай бұрын
Thank you very much! You know, I'm motivated by two things: one is that I love learning myself, and the other is that it feels indescribably good to share knowledge.
@m.aureliolima73675 ай бұрын
Good evening. Dynmode and Dyn Input are the same thing?. Thanks.
@kisminden5 ай бұрын
Not entirely. Dyn Input is the function itself. And Dynmode is the Variable that you use to set the modes of the Function.
@user-gt7hd2iq4p5 ай бұрын
Thank you 🙏🏽
@kisminden5 ай бұрын
Glad I could help
@user-gt7hd2iq4p5 ай бұрын
Thank you so much!! This is makes my job a little easier.
@kisminden5 ай бұрын
It's a very good feeling to know I could help.
@ItzSimonMC6 ай бұрын
Happy birthday
@kisminden6 ай бұрын
Thank you very much!
@archiedugbinada20466 ай бұрын
I didn't get the stretch part with the dimensions. It wasn't working like yours, I need clarifications. Thanks in advance.
@kisminden6 ай бұрын
You do not need to use Dimension, just click on the point in the image. It is important that F3 is off, otherwise the click may go to another point in the image. 1. select the image 2. select the scale command 3. click on the first point on the line 4. press the r key (if you have autocad in english) 5. click again on the first point and then on the second point 6. finally enter the distance between the two points
@kisminden6 ай бұрын
sorry, you have to press enter after the letter R, maybe you missed it
Suppose I use autocad Lisp uploaded to other channels to make my KZfaq videos, will there be a copyright strike?
@SurveyCivilRakesh8 ай бұрын
Please answer me
@kisminden8 ай бұрын
@@SurveyCivilRakesh I would ask the author to declare whether the script contains a piece of copyrighted code. It is also possible that it does, but that it allows distribution with attribution. I only have one code up for now, there are no restrictions on that.
@SurveyCivilRakesh8 ай бұрын
@@kisminden So sir how will I know?
@kisminden8 ай бұрын
@@SurveyCivilRakesh you have to ask where you find the code. if you accidentally share copyrighted content, youtube will notify you anyway, you can't go wrong
@SurveyCivilRakesh8 ай бұрын
@@kisminden Whom I will use in Lisp, he will have to ask what is the code?
@cirstoforoainsworth82648 ай бұрын
Promo-SM 💯
@kisminden8 ай бұрын
That's very kind, thank you very much, but I'll stick to the traditional route.
@bilalasher19948 ай бұрын
omg you're so brilliant & creative, I wasted around 6 hrs to solve this work hha
@kisminden8 ай бұрын
Thank you very much, it's really a pleasure to help! I think the advantage of this solution is that you don't have to embed the coordinates exactly, but then it is possible. Have fun with it!
@jarryjar84098 ай бұрын
That’s cool man. Cheers
@poidura8 ай бұрын
Does it work on autocad for mac aswell ?
@kisminden8 ай бұрын
Definitely yes!
@poidura8 ай бұрын
Hmmm for some reason i can not 'insert field' when in the formula bit. I think this might be a mac issue, or does this not work in autocad LT perhaps ?@@kisminden
@kisminden8 ай бұрын
@@poidura 1. Insert the cursor in the right place. 2. menu INSERT, and than the FIELD option in the drop-down menu
@ayas20189 ай бұрын
How to place the image in autocad ? It didnt work with me
God bless you for this video What are the software used
@kisminden9 ай бұрын
It is a real pleasure to have been able to help. I created the video with Camtasia and the audio with Clipchamp. You can find the full tutorial here: kzfaq.info/get/bejne/a9JdgcmlqNfHdpc.html
@krisnaputra90809 ай бұрын
Where is full
@kisminden9 ай бұрын
kzfaq.info/get/bejne/iNRiqcaEnbfNdps.html
@punjabiculturalheritage894210 ай бұрын
sir number?
@kisminden10 ай бұрын
hello, what number do you mean?
@kisminden10 ай бұрын
kzfaq.info/get/bejne/n8WKgKVhpse7oqs.html
@kisminden10 ай бұрын
kzfaq.info/get/bejne/a9JdgcmlqNfHdpc.html
@dunoobyduby10 ай бұрын
wenn ich die blöcke kopiere und wieder einfüge kommt nur ###### woran liegt das?
@kisminden10 ай бұрын
Hallo, Sie müssen beide Blöcke kopieren, vor allem den ersten, denn er ist die Referenz.
@kisminden10 ай бұрын
kzfaq.info/get/bejne/g7yfmL2S3q3OkoE.html
@dunoobyduby10 ай бұрын
@@kisminden Vor allem darf man nicht mit Stg+shift+c kopieren, habe ich soeben herausgefunde, danke !
@kisminden10 ай бұрын
@@dunoobyduby Das stimmt. 👍
@user-ie6yc1qi7i10 ай бұрын
And how do I tranfers these create shortcut hotkeys to another computer? Saving acad.pgp I can just save aliases commands from aliasedit. Theres a way to save my created shortcut keys?
@kisminden10 ай бұрын
options and then profiles; export the profile you find there. copy the exported file with ".azg" extension. on the other computer options , profiles and import
@vivekvijay402110 ай бұрын
Plese do a video for level table for boundary wall with automatic value changes
@kisminden10 ай бұрын
I'm not a boundary wall expert, but I can try to make a video to show you. What parameters would be most important? Maybe there is an existing table I can use?
There are many reasons why it may not work. The first thing I would check is the file access permissions. For example, if you are trying it on a work machine, it is possible that it is restricted from accessing the CUI file. Another possible reason is that you are using a profile that does not load the CUI file. A third possible reason is that the key combination or command you have selected has already been entered by someone else. You should also remember that you have to restart Autocad after creating the shortcut.
@suryapraveen7211 ай бұрын
It's inacurate many times and people without much knowledge in autolisp struggle with wrong programs that it puts out
@kisminden11 ай бұрын
It's true that sometimes it doesn't give me what I need and I have to make it work like a teacher makes a student work. For example, that's why the uploaded code is not the same as the one in the video.
@rocky800411 ай бұрын
Awesome teaching
@kisminden11 ай бұрын
Thank you!
@Enghaithem202411 ай бұрын
thank you so much for this value information.
@freotr995511 ай бұрын
Where can i get this door?
@kisminden11 ай бұрын
Hello, this as DWG is not uploaded anywhere because I am using the school version. But i will upload a video with the full tutorial today. i will send you the link
@kisminden11 ай бұрын
Hi, you can see the full tutorial here kzfaq.info/get/bejne/pcqHddiCt962dn0.html
@simracingelite400411 ай бұрын
i have made similar but i have assigned point in the block, this seems a bit complicated
@kisminden11 ай бұрын
Yes, you are right, there are several ways. Everyone can find the best solution for them based on their own experience and taste. My aim in this video was to explain the principle. It can then be simplified, complicated, customised.
@simracingelite400411 ай бұрын
@@kisminden i appreciate your tutorial but not many people know this advance level block creations. keep up the good work!
@kisminden11 ай бұрын
@@simracingelite4004 thank you very much
@kirikanjau506511 ай бұрын
THANK YOU
@ivanhuertadelavega3724 Жыл бұрын
How did you crear a title block that allows you to change each name individually?
@kisminden Жыл бұрын
You can change and create attributes in the block at the time of creation and later. To do this, you need to select the block and go to the block editor instead of choosing to edit the attribute. If you are using the right mouse menu, after selecting the block, choose either Block Edit or Edit in the block panel on the Home tab or the command "BLOCKEDIT" I hope this will help "kzfaq.info/get/bejne/l7iGhtedkqy7gHU.html"
@kisminden Жыл бұрын
If you double click on the attribute you will edit only the attribute of the block instead of the block
@KamleshDhaka0017 Жыл бұрын
Thanks 🙏🙏 very us Full ❤
@KamleshDhaka0017 Жыл бұрын
Sir es ka pura video bnoo please 🙏🙏
@kisminden Жыл бұрын
ठीक है मैं कुछ दिनों में एक पोस्ट करूंगा
@kisminden Жыл бұрын
Hi, dear Kamlesh, find the full tutorial hier kzfaq.info/get/bejne/a9JdgcmlqNfHdpc.html
@KamleshDhaka0017 Жыл бұрын
@@kisminden thanks 🙏 sir आप का से हो में राजस्थान से हू
@lukagelashvili6214 Жыл бұрын
Why i cant do this ? Is there parametrs that i need to correct?
@kisminden Жыл бұрын
Hello, which version are you using? Enable dynamic updates: to automatically update fields, AutoCAD settings must enable dynamic updates. Check the "Open and Save" or "Files" tab of the "OPTIONS" command and make sure that the "Automatic save" option is enabled. or/and MEASUREMENT command: the "MEASUREMENT" command determines the display of values based on the current AutoCAD measurements. Check the "MEASUREMENT" command settings and make sure they are configured as expected. This should be set to 1
@IDGAF_about_u Жыл бұрын
Mine still won't pop up bro, pls. Help!!
@kisminden Жыл бұрын
Options -> User Preferences -> Right Click Customization - kzfaq.infoh8tlH8oKaQM?feature=share
@katendetimothy6542 Жыл бұрын
l realized there's a lot to learn in AutoCAD
@kisminden Жыл бұрын
Autocad is very versatile. I also learn something new almost every day.
@user-bk5tu8yw3o Жыл бұрын
How to change the default menu, to edit menu?
@kisminden Жыл бұрын
If nothing is selected, you get the default menu. When something is selected you get the edit menu.
@chrixart5884 Жыл бұрын
THANKS! BIG HELP
@learnhill1570 Жыл бұрын
nice
@zeeshanfayyaz5315 Жыл бұрын
I need your help
@kisminden Жыл бұрын
Hi, what can i do for you
@dronedrone2077 Жыл бұрын
function keys are not working any solutions?
@kisminden Жыл бұрын
does not work at all or only in Autocad? at the bottom right there is a hamburger menu so you can display many functions on the lower frame. So you can control the functions with the mouse instead of the function keys. hope I understood correctly
@dronedrone2077 Жыл бұрын
@@kisminden when i click on (f8 all other function keys)( version 2016) button orthomode doesn't work by clicking the mouse only is working from the hamburger menu.
@kisminden Жыл бұрын
@@dronedrone2077 this could be a hardware compatibility issue. I've read about it before, but I've never seen anything like it. I've only seen it on laptops where you also had to press the FN key. unfortunately, the function keys are not commands to which you can assign a shortcut. I look around
@kisminden Жыл бұрын
@@dronedrone2077 my last idea. the manufacturer of the computer sometimes adds extra functions to their keys: "intelligent keyboard", "multimedia", "volume", "brightness", etc. it would be worth checking whether you have an application from the manufacturer, e.g. lenovo "my smart settings". there you can turn off these extra functions. if it doesn't work only in autocad, it's probably HW compatibility
@aleksanderpavlovic98062 жыл бұрын
Coole Sache, hilfreich erklärt ohne viel bla bla 👍... Echt top!