I like the real world example of the drive through. 👍🏻
@Can-AmX3Dude4 күн бұрын
Thanks, was just trying to keep real no bs !
@Driverclass17 күн бұрын
Nice pickup
@Driverclass17 күн бұрын
Woooohooo
@Can-AmX3Dude7 күн бұрын
@@Driverclass1 thanks
@omidelatorre135910 күн бұрын
Hey man did you ever that that part number for the clamps I just lost one
@Can-AmX3Dude10 күн бұрын
No part # it only comes with full windshield
@eddys.razorxp644511 күн бұрын
Great job explaining looks like pain in the ass .
@Can-AmX3Dude11 күн бұрын
Thanks appreciate the positive feedback
@rlvin684320 күн бұрын
How could I remove it I’ve tried it but it’s super hard if you could give me any tips
@Can-AmX3Dude20 күн бұрын
@@rlvin6843 the roll cage locks on each side is what you are talking about?
@rlvin684320 күн бұрын
@@Can-AmX3Dude yeah it is and I just wanted to remove the whole windshield and I couldn’t find out how to
@Can-AmX3Dude20 күн бұрын
@@rlvin6843 if that’s what you’re asking then used a peace of wood like the size of a hockey stick about 6 inches long and get someone to unlock or press inside and uses the peace of wood at the bottom and with a hammer tapping it up until it’s release it becomes hard to remove after debris or mud cooks behind it now before I put it back on every year I spay a silicone base lube on the back makes life way easier also can use peace of steel but will make Marks and scratches hope this helps and you understand what I’m saying if not ask me more about it and I’m happy to help you
@rlvin684320 күн бұрын
@@Can-AmX3Dude thank you I think I got it 👍
@Can-AmX3Dude20 күн бұрын
@@rlvin6843 no problem glad to help
@jeannekelp3794Ай бұрын
Thank you so much for this video, helps so much!
@Can-AmX3DudeАй бұрын
No problem glad you like it and appreciate the positive feedback be safe out on the trails
@SithLordCarterIIАй бұрын
Great video, for those watching with a 23, there isn’t a T20 securing the front lights, it’s a 8mm screw.
@Can-AmX3DudeАй бұрын
Thanks for the update and appreciate the comments
@shaunyballzАй бұрын
That ac condenser is cryin!
@billyjenkins3015Ай бұрын
Link to the top funnel?
@Can-AmX3DudeАй бұрын
You can find it at any auto parts store it a funnel used for differential www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiTh_TT4taGAxUAZ0cBHeSbAvEYABASGgJxdQ&gclid=CjwKCAjwjqWzBhAqEiwAQmtgT6n-MY_wuyQprm5oUr-YUzqxATFZIflegjW3hem5tjp5NyRzBgfJPBoC-VsQAvD_BwE&sph=&ohost=www.google.ca&cid=CAESVOD2y5iGVl0xCViN2g_FOshNkzpxjS0aCFONmONEDPPdKceylBzeCS5Pm5bHvqOBNTzrx22Mtlm5h32PUYee6jjK3GCWLIPSgOqBVvKfqim-Tzo-Dg&sig=AOD64_3It8k7hZwc9OcC5wlBTPEYyyRnxQ&ctype=46&q=&ved=2ahUKEwim-e3T4taGAxVvF1kFHciBBAsQzzkoAHoECAQQDw&adurl=
I just got one for my 2024 High Country and wanted to watch a video or 2 on how to install. Looks like you only get 1 shot at putting it on correctly or you are screwed. I also got mine from the dealership. It is a Lund. Used my points from when I purchased the truck so it was free.
@Can-AmX3DudeАй бұрын
If you check when I just remove just a bit too pull it off the tape cover in the back and there’s just a bit that sticks to the paint without pressing on it just to hold it in place then when you got it where you want it press your spot where the tape protector you got sticking out to pull and just pull and hold it from the opposite side that you are pulling just to be sure you don’t move and everything should go right, hope this help
@Can-AmX3DudeАй бұрын
And once you get one section of that 2 way tape protector off push pressure on the tape you just expose underneath and repeat
@davesauerzopf6980Ай бұрын
Thanks
@Can-AmX3DudeАй бұрын
@@davesauerzopf6980 glad to help and fell free to ask questions anytime
@omarmendoza3814Ай бұрын
How much?
@Can-AmX3DudeАй бұрын
How much for the trailer?
@Can-AmX3DudeАй бұрын
It has increased in price since I bought it!
@desertman4569Ай бұрын
u did good protect concrete next time oil doesn't look food on concrete
@Can-AmX3DudeАй бұрын
Thanks 😊 appreciate the feedback, feel free to share your thoughts anytime!!
@Driverclass12 ай бұрын
Is your canam RPG proof ?
@Can-AmX3Dude2 ай бұрын
Lol No it’s not RPG proof, hope no one is playing on shooting me with one 😂
@ryanparent34912 ай бұрын
hey I have mine apart now,I have a leak but it's on the driverside, would that green bring cause the leak? I notice there's no gasket on the driverside
@Can-AmX3Dude2 ай бұрын
No you make a gasket with a sealer if you check a my front differential video you should be able to know what you need to do
@squishy3320002 ай бұрын
yes I did see it, just your video your doing the cover on the passenger side,my leak is on the driver. so there's no gasket or speaker there at all,just that green oring. so your saying put sealant on there anyway?
@Can-AmX3Dude2 ай бұрын
@@squishy332000 no change the O ring if it is leaking
@squishy3320002 ай бұрын
no you know the part number for that green oring?
@Can-AmX3Dude2 ай бұрын
@@squishy332000 ya I do I change mine when I did my diff! Still have the bag it came in cause I keep my old one was nothing wrong with it I just didn’t want to need to take it out again since it was on the counter will let you know tomorrow if that’s ok 👍
@gamenut3372 ай бұрын
hey saw you on my recomended thought i would give you a sub look forward to your next video mate you seem like a good guy well done on the 1k hope you make it to the top!
@Can-AmX3Dude2 ай бұрын
Thanks Dude, that is really appreciated and please feel free to ask questions and give feedback on what you would like to see may not be able to do everything but can help or give feedback/advise, and thanks again for subscribing that’s to me is the biggest show of someone appreciation of my videos
@Driverclass12 ай бұрын
Wohhhoooooo
@Can-AmX3Dude2 ай бұрын
Thanks Dude!!!
@jerrytipsword30332 ай бұрын
Congratulations on the 1000 subscribers
@Can-AmX3Dude2 ай бұрын
Thanks Dude!
@Can-AmX3Dude2 ай бұрын
Sorry can only have 1 winner if the Chanel keeps growing will have more giveaways in the future!
@cwsenderson2 ай бұрын
I love your arctic cat, I have one myself
@Can-AmX3Dude2 ай бұрын
Ya it my boy’s ATV and he thanks for watching greatly appreciate
@cwsenderson2 ай бұрын
@@Can-AmX3Dude they sure are tanks, easy and cheap to fix also, at least on mine
@Can-AmX3Dude2 ай бұрын
@@cwsenderson yes would have to agree with you on that
@honestlyhollow.2 ай бұрын
Been waiting for a while for a new video. Hopping for more content soon😁
@Can-AmX3Dude2 ай бұрын
More will be coming and thank you for watching, it greatly appreciated!
@lilstarfishh2 ай бұрын
congrats twin !!
@Can-AmX3Dude2 ай бұрын
Thanks for positive vibe !
@bstewy2 ай бұрын
Congrats 👏
@Can-AmX3Dude2 ай бұрын
Thanks man greatly appreciate all of you !
@tomredcly2 ай бұрын
wow! what an ignorant spot to work in lol
@Can-AmX3Dude2 ай бұрын
How do you do it ??? Always looking for positive and better ways of doing things so please let me know!
@joshfinn86012 ай бұрын
I just did my on my defender hd10 and ordered the hub grease tool, unfortunately the x3 is the only one that the axle pases through the tool so i had too remove my hub to pull my spindle and drop my a arms what a pain in the ass.
@Can-AmX3Dude2 ай бұрын
Ya must be, but thanks for the comment
@jeremyzimmer75042 ай бұрын
What size line did you use and how long?
@Can-AmX3Dude2 ай бұрын
50 feet 6000 pounds that’s the same thickness as 4500 pounds it fits good
@user-rb7sk2ko4i2 ай бұрын
Man, I hope you gave it a kiss when you were done. Just put it on already.
@Can-AmX3Dude2 ай бұрын
😆
@StarknightMT_official2 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your Can Am maverick x3
@Loop3072 ай бұрын
Did u do a line before this ????
@Can-AmX3Dude2 ай бұрын
Don’t understand the question?
@Can-AmX3Dude2 ай бұрын
No I think I had a cold and was just out of breath and putting the microphone so close was not a good idea 😆
@ToreNater3 ай бұрын
It looks like you ended the video with the wrong disc, unless you had it to the side with the roller bearing. The last disc should end with the solid disc instead of the one with the holes in it right?
@Can-AmX3Dude3 ай бұрын
Yes that right
@hatenlebron3 ай бұрын
How did you get the wire from the front into the cabin?
@Can-AmX3Dude3 ай бұрын
I ran it along the radiator hoses and tie rap it going to centre console
@Can-AmX3Dude3 ай бұрын
If you stick you head under the steering you will see behind the gas pedal the hoses I’m talking about
@armandoavalos92833 ай бұрын
Is there any part numbers on those clamps? I lost mine trying to get new ones
@Can-AmX3Dude3 ай бұрын
That probably need to go to dealer I can not find it anywhere
@Can-AmX3Dude3 ай бұрын
I will check if there’s a part number on the part and let you know
@armandoavalos92833 ай бұрын
They both said i need to buy the whole new windshield. So they want me to spend over 1k for 20 dollar parts BS @Can-AmX3Dude
@Can-AmX3Dude3 ай бұрын
@armandoavalos9283 no don’t do that I will look into it and try to save you money
@Can-AmX3Dude3 ай бұрын
I called my dealer that’s got the best parts manager he is opening a case number with BRP to find the part number and get it I’m going to go check on my clips for part numbers!!!
@OhOhioDude3 ай бұрын
yo! thanks for the vids man helping me learn to work on my unit!
@Can-AmX3Dude3 ай бұрын
No problem, glad it helped you out and really appreciate the positive feedback and be safe riding!
@kevingoodrich30503 ай бұрын
i used a 3 inch extension and a wobble extension, just long enough to work. Also loosened the plug all the way and used a magnet to pull the spark plug out. The cam sensor was the biggest pain to remove.
@Can-AmX3Dude3 ай бұрын
Yes it is
@cwsenderson3 ай бұрын
Have you had any problems with the fronts?
@Can-AmX3Dude3 ай бұрын
No I haven’t except for the front cv’s being stuck in the front differential because they hadn’t been greased up!
@nicklanglois29713 ай бұрын
where is the game play
@Can-AmX3Dude3 ай бұрын
PS5 ??? 😆
@squidee97324 ай бұрын
My driveway is a hill and just dont want to leave a ton of snow cause i would be worried it still be hard to get up in my wifes car thanks i know its a older video hopefully u can see this and answer my ? Thanks
@Can-AmX3Dude4 ай бұрын
It doesn’t matter if the video is old new content pop up in my notifications, but to answer your question if you completely removed the mushrooms shape level the plow you would have the blade cut everything, so yes it would, cause it’s a heavy plow if you go with the steel plow and extension and end blades, hope this helps clarify your question
@squidee97324 ай бұрын
Just curious looks like it doesnt get rid of all snow how much is actually left on the driveway can you get it down to pavement or pretty much gravel ?
@Can-AmX3Dude4 ай бұрын
Yes you can lower the blade guides, but I prefer to keep snow covered not to use up the blade or the guides hope this helps thanks for your questions
@MrDakotah1234 ай бұрын
Is it possible to replace the green diff cover oring while it’s still in the machine? Mine is leaking.
@Can-AmX3Dude4 ай бұрын
I don’t think so, and to get to the green o-ring you got 1/2 done pulling the diff out
@iowndu214 ай бұрын
Tighten the spring on the b.o.v have it blow off after flooring it. There’s no point on releasing if it isn’t running over 230 with a tune.
@iowndu214 ай бұрын
Great video though! Thank you for making a video with a real life perspective.
@Can-AmX3Dude4 ай бұрын
@@iowndu21 thanks a lot I’m glad you enjoyed it and appreciate the feedback
@Can-AmX3Dude4 ай бұрын
Ya but it sounds good 👍
@KatieHoman-ms5nd4 ай бұрын
You are killing these videos man. I try to diy as much as I can myself especially being a chick, and your videos are done so freaking well I feel completely confident replacing or working on the bulk of my unit. I appreciate you taking the time to share your knowledge with us!
@Can-AmX3Dude4 ай бұрын
Well thank you for your positive feedback , the biggest thanks you could do is subscribe and if you are, a big thank you 😊 it’s really appreciated, be safe on the trials
@KentuckyCanAm4 ай бұрын
Over greasing bearings will destroy them quicker by building up heat and increasing friction. Bearings can’t roll when too much grease applied.
@Can-AmX3Dude4 ай бұрын
That one is funny, because with all the extra added on we put on are X3 and bigger tires, I don’t think my wheels bearing won’t turn!
@KentuckyCanAm4 ай бұрын
@@Can-AmX3Dude it’s your ride. I hope DIY people do a little research by reading others opinions.
@Can-AmX3Dude4 ай бұрын
@@KentuckyCanAm have you ever packed a wheel bearing on a pickup truck or a trailer and I have and never had any problems by fully packing them cause that what we did at the dealership and heavy equipment and never had any problems in almost 30 years , but you can do anything I just know that I didn’t grease mine when I got my X3 and the rears had to be replaced in 6 months on stock tires and now the rears are on 3 1/2 years on 32 inches and no play !
@thelifeoffastony11575 ай бұрын
Wheel bearing?? Huh.
@Can-AmX3Dude5 ай бұрын
Ya man grease dose wheel bearings the first day you get your X3 !
@kellymcadams26925 ай бұрын
My 2017 X3 turbo R is using oil and makes a noise that sounds like a vibrating heat shield when I let off the pedal and decelerate. It has about 3300 miles on it.i suspect it's turbo noise. Would that cause it to burn a quart of oil on a 3 hour ride? It seems to run fine.
@Can-AmX3Dude5 ай бұрын
The noise is probably the drive line needing grease, the oil check your air filter remove it and see if you got oil in your air box and check the smoke coming out of your exhaust pipe to see were it going, let me know !
@edscorsese5 ай бұрын
beautiful truck sir
@Can-AmX3Dude5 ай бұрын
Thanks Dude ya love it !
@edscorsese5 ай бұрын
About to put it on in a bit! How's it holding up? I live in Los Angeles so our weather isn't bad, only the politics...
@Can-AmX3Dude5 ай бұрын
@@edscorsese it great 👍 hasn’t changed colour or unglued or moved at all
@brienhalverson19565 ай бұрын
You don`t need those tools to split your clutch. just need a clutch puller.
@Can-AmX3Dude5 ай бұрын
What do you use to split your primary clutch?
@brienhalverson19565 ай бұрын
Clutch puller is all you need. kzfaq.info/get/bejne/bc9padOE1pPSZac.html@@Can-AmX3Dude
@Can-AmX3Dude5 ай бұрын
So you bang the treads and if you ever miss it may cost you a spider, but it works aluminum after banging it for a long time not sure 🤔 I want to do that if you do it once and don’t ever need to do it again ok 👍 but I play in my clutch minimum 2 times a year , but thank you for you feedback it’s appreciated
@brienhalverson19565 ай бұрын
It`s the same way they do it on the new Pdrive clutches, both on the X3 and on the ski doo turbos. and have for years.@@Can-AmX3Dude
@brienhalverson19565 ай бұрын
Guess you tell GBoost, kzfaq.info/get/bejne/l6iXls6W3NGWoYk.html@@Can-AmX3Dude
@brienhalverson19565 ай бұрын
i beg to differ, the Carlisle Belts® UXP488 - UXP™ Drive Belt is the best belt , comes with 3 year warranty, Carlisle Belts® is a brand name for a line of top-quality belts for powersports and industrial applications produced under the auspices of the Timken Company. It applies its deep knowledge of metallurgy, tribology and mechanical power transmission across a variety of bearings and related systems to improve reliability and efficiency of machinery and equipment all around the world. Known for its quality products, the company makes the world more productive and keeps industry in motion. Its unique and storied history is filled with technical achievements, dedicated associates and a commitment to satisfying customers. Behind every belt is a team that takes pride in all that the company does. is G boost a manufacture of belts ? no they are not. they get someone to manufacture their belts like Carlisle or Gates.
@mattblanchard68315 ай бұрын
Just wondering where you buy your rhinos 2.0's ? Tnks
@Can-AmX3Dude5 ай бұрын
Ravco.ca
@holeshotjr275 ай бұрын
Do you have the smart loc front diff
@Can-AmX3Dude5 ай бұрын
Yes I do
@mattblanchard68315 ай бұрын
Did you have to cut it off to get it out ?
@Can-AmX3Dude5 ай бұрын
Your talking about the other video when I’m trying to pull it out if so ya basically cut it with grinder cutting blade until you can split the diff was my only option, just because I didn’t grease the splines when I got my X3 It was a real pain and appreciate you watching my videos and thank you
@mattblanchard68315 ай бұрын
Did you ever try some Kroil ? Best shit in the world ! We use that alot in the oilsands. It actually has capillary effect hense the Kr in kroil 😅. I've seen seen stuff come off that you wouldn't of imagined
@Can-AmX3Dude5 ай бұрын
Have never heard of Kroil wood really like to know where you can get it ?
@mattblanchard68315 ай бұрын
I get it from work but i actually found some on amazon
@Can-AmX3Dude5 ай бұрын
@mattblanchard6831 thanks man appreciate the info
@mattblanchard68315 ай бұрын
Tnks to you for the trials and errors. Gives us X3 guys some do's and don'ts. Especially their enxpensive as F@#$ for parts. Lol. Been soaking my c.v's for the last week in kroil i guess will see but i'm confident on that shit. I'll keep you in touch 😅
@Can-AmX3Dude5 ай бұрын
@@mattblanchard6831 ya for sure everything I have learned is been by mistake I didn’t have KZfaq growing up and had to learn the hard way that the reason I do this videos, I wish I could post videos more frequently but, sometimes after a 70+ hours week of work the lazy boy looks really nice 😊, more nice then a cement floor in the garage! So wen guys like you comment and give advice or just appreciate is about the only thing keeping me making videos!